4
Strict compliance with the instructions and maintenance
recommendations is at the basis of the intended
conditions of use. In improper use or non-compliance
with the operation instructions any kind of warranties are
terminated.
Before putting into operation
Unpacking the appliance
Once you have removed the device from the package,
check it for any obvious damage. If you have any
doubts do not use the appliance and contact your
service center.
Save the packaging by all means because the device
is accepted for repairs only with its original packaging.
▹The appliance must be used only for the purpose for
which it is intended.
▹Prior to using the appliance read completely and
carefully this User Guide.
▹Any use of the appliance contrary to the instructions
in this User Guide will void the warranty.
▹The electrical equipment to which this device will be
connected must meet the valid safety instructions.
▹Do not use the appliance in extreme temperatures.
The ambient temperature should range between +5 °C
and +40 °C (40 °F and 105 °F).
▹Before connecting the appliance to the electricity
network, make sure that the contact is safe enough
and grounded. You can see the power consumption
of the appliance on the manufacturing plate on the
bottom of the appliance.
▹Do not leave the appliance unattended. Even in
brief work breaks pull out the plug from the socket.
▹Before starting any kind of work on the device pull
out the plug from the socket.
▹Do not pull out the plug from the socket by pulling
the cord of the appliance.
▹Protect the power cord from twisting, damage
or passing over sharp edges. Keep it away from heat
sources.
▹Do not use the appliance if the power cord or the
appliance itself is damaged.
▹Do not use an extension cord without a control sign
and do not use cable reels in any case.
▹If you need to change your power cord, contact
your service.
▹The device is equipped with a thermal switch
protection that can be activated or changed only by
E V International Ltd. Company authorized service center.
▹If the device is damaged or it does not function
properly it must be immediately turned off. Avoid any
interventions.
▹For any kind of repairs, contact E V International Ltd.
or your supplier.
▹If the power cord of the device is damaged it should
be immediately changed by the manufacturer or an
authorized service center.
Safety regulations
