REMARKS
A solar collector generates heat
from sunlight and all other types
of light. This leads to collector con-
nectors getting very hot, even when
they are not lled. This creates a
risk of burning. Cover the collec-
tors with opaque material until the
installation has been completed. It
is recommended you leave the col-
lector inside its packaging until it is
installed.
Never install any shut-o valves in
the line between the collectors and
the safety valve. The safety valve re-
sponds at 87 PSI pressure.
Never set the Solar loop presure
greater then potable pressure.
Neither drop the collector nor any-
thing onto the collector.
Never step onto or stand on the col-
lector.
Never leave the collector unsup-
ported or unsecured. The glass
could break if the collector falls over.
All sensor wiring needs to be rated
for expected temperatures. All sen-
sor wiring needs to be protected
from degradation and false signals.
!
!
!
!
!
!
!
