EUROPRO X-Pro D140 Manual de usuario
EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36
SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510
X-Pro D140
Réf. 40090
User manual
Edition of 28/04/2021
More information on www.euromair.com
User manual - X-PRO D140 202105-515-ENGP2
You just acquired one of our
machines and all the team
of Europe Projection thanks
you for the condence
you have granted us.
Manufacturer of professional
equipments for paint and
llers, we have put our
know-how for 25 years
at the service of the
users of our machines.
Our technical & commercial
team is at your disposal
for any further information
you may need about the
machine you just acquired.
EUROPE PROJECTION
228, avenue Olivier Perroy
13790 ROUSSET
Tél : +33 (0)4 42 29 08 96
contact@euromair.com
SUMMARY
1. USER MANUAL............................................................. p. 3
1.1. Importance of the manual .........................................p. 3
1.2. Receivers of the manual............................................p. 3
2. WARNING .................................................................... p. 4
2.1. Safety .....................................................................p. 4
2.2. Transport ................................................................p. 6
2.3. End-of-life of the product ..........................................p. 7
3. YOUR MACHINE ........................................................... p. 8
3.1. Description..............................................................p. 8
3.2. Technical characteristics ...........................................p. 8
3.3. Identication of the components ................................p. 9
4. USE OF THE MACHINE ................................................. p.11
4.1. Machine prerequisites...............................................p.11
4.2. Machine starting up .................................................p.12
4.3. High pressure washer prerequisites ............................p.13
4.4. High pressure washer starting up ...............................p.14
5. DEFECTS AND REMEDIES............................................. p.16
6. CLEANING PROCEDURE ............................................... p.18
7. MAINTENANCE............................................................. p.19
8. SAFETY CARD RUNNING............................................... p.20
9. VOLUME SCHEME ........................................................ p.22
10. ELECTRICAL SCHEMES............................................... p.23
11. HYDRAULIC SCHEMES................................................ p.26
12. DECLARATION OF CONFORMITY ................................. p.29
13. WARRANTY CONDITIONS............................................ p.31
202105-515-ENG User manual - X-PRO D140 P3
1. USER MANUAL
1.1. IMPORTANCE OF THE MANUAL
This manual is a key part for the use of your machine. It summarizes the procedures of starting-up, cleaning
and maintenance of the device and also the safety instructions you need to observe.
Read carefully all the working and safety instructions and the warnings included in this manual before
starting your machine.
Most of the accidents are caused by the non-compliance of the safety standards and rules.
This manual must be kept near the machine, within reach of the user and held in good condition until the
nal destruction of the machine.
In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on page
4 for a copy at any moment.
1.2. RECEIVERS OF THE MANUAL
This manual is intended to any staff which will manipulate the machine :
- people in charge of the transport of the machine
- people in charge of the use of the machine
- people in charge of the cleaning and maintenance of the machine
- people in charge of the nal destruction of the machine
User manual - X-PRO D140 202105-515-ENGP4
2. WARNING
2.1. SAFETY
Using the machine in an incorrect way or in non-compliance of the safety instructions indicated in
this manual can cause death or serious injuries.
Read carefully all the working and safety instructions and the warnings contained in this manual
before starting your machine.
• Respect all the safety standards before running the equipment.
• Use the equipment only for the applications specied in the manual.
• Always remain alert when using the equipment.
• Transport the machine using the handles or the appropriate grips.
• During the breaks, disconnect electrically the machine.
• Run the equipment to its nominal voltage.
• Let at least 50 cm of free space between the equipment and any obstacle so that the air ow
is not blocked.
• Know how to quickly stop the equipment in case of necessity.
• Never use the equipment while it is running abnormally or it is defective.
• Do not direct a water jet or ammable liquid on the machine.
• Never direct an air jet or product jet on a person or an animal.
• Do not touch warm surfaces of the equipment.
• Always wear adequate body protections (glasses, gloves, overall and mask) and pay attention
to long hair.
• Never touch moving parts.
• Do not insert any object or the hands inside the protection grids to avoid any accident or
damage to the machine.
• For any outside job, only use appropriate extension cords.
• Maintain the equipment carefully and clean it properly after every use.
• Disconnect the equipment before any intervention.
• Avoid absolutely to unscrew any connection while the machine is under pressure.
• Check the damaged parts.
• Do not clean the plastic parts with solvant.
• In case of needed After-Sale Service, always specify the machine model and its serial number.
• For any replacement of parts, only use genuine parts.
• Do not modify the machine.
• Do not cut or dismantle the protection grids.
• Do not open the electric box.
202105-515-ENG User manual - X-PRO D140 P5
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
2. WARNING (continued)
2.1. SAFETY (continued)
WORKSPACE
• Maintain the workspace clean and clear.
• Ambient operating temperature must be from -5°C and 35°C.
• Do not use the equipment in a potentially explosive area.
• Do not place any potentially inammable objects in close proximity to the machine.
• Take away every not qualied person from the working area of the machine, as well as children and
animals.
• Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.
HOSES
• Always use hoses and connections adapted to the used product (genuine parts), do not try to x it.
• Do not walk on the hoses, do not bend them.
• Do not use the hoses to pull the machine.
STORAGE
• Keep the equipment in a clean and clear area in which the temperature does not exceed +35°C.
• After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it blocking
up. The storage of a not greased pump can damage it seriously.
User manual - X-PRO D140 202105-515-ENGP6
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
2. WARNING (continued)
2.1. SAFETY (continued)
SAFETY SYSTEMS
This machine has been designed to allow working with the maximum safety.
So safety sensors and emergency stop has been setted on your machine without complicating your work.
We are insisting on your caring to maintain them in good condition and above all not to remove them.
In case of malfunction, please contact immediately your dealer.
HYDRAULIC
This machine is equipped with high pressure hydraulic circuits (200 bar).
The following insctructions are essential for your safety:
• Never tighten a hydraulic connection while the machine is working.
• Never try to wipe an oil drop on a hose or hydraulic component with your nger while the machine
is working.
• Take care of the good condition of the plumbing (a damaged or blistered rubber must be changed
immediately).
• Check regularly if the circuit does not have any leak.
• In any case, do not touch hydraulic parts (even when the machine is not working) because the
components shall be hot and there is a burn risk.
SAFETIES AND PROHIBITIONS
• The hopper grid rising up causes the screw movement stop.
• Emergency stop is located on the machine hood. Do not hesitate to use it if needed, this will immediately
stop the motor. To restart the machine after emergency stop button pushed, follow this procedure:
- Put the command buttons in central position.
- Rearm emergency stop.
- Command panel lamps must be lighted-up (green = correct / red = default).
- Engage the starter with the contact key.
- Resume spraying or pumping procedure.
202105-515-ENG User manual - X-PRO D140 P7
2. WARNING (continued)
2.2. TRANSPORT
• This machine was the object of a road homolagation (n°e2*2007/46/0673). As such, it must be
registered and can be thus dragged normally on the road network.
• The adjustable jockey wheel easily allows you to x the helm to the harness of your vehicle.
• The adjustable helm gives you the possibility of adjusting the machine horizontally.
• An electric cable provided with a grip allows you to link the device of lighting of the trailer with the
tractor truck.
• A cable of break allows to bind the device of harness of your vehicle with the machine in case of hanging
problem of the helm during a travel.
It is imperative to collide this cable on the harness of the vehicle.
Before any road travel:
• Check the pressure of the pneumatics which has to be 2.8 bar max.
• Check the tightening of the nuts of wheels.
• Check the tightening of the nuts of the articulated helm and the presence of pins.
• Clean reectors.
• Clean and check the functioning of the device of lighting.
• Collide the cable of break.
2.3. END OF LIFE OF THE PRODUCT
At its end-of-life, the machine must not be eliminated with the other household waste. The
uncontrolled elimination of waste can harm the environment or human health. Individuals are
invited to contact the distributor which sold them the product or to inquire with their city hall
to know where and how to get rid of the product so it can be recycled while respecting the
environment.
For any further information, please contact our hotline +33 4 42 29 08 96 or conseil@euromair.com.
Only are exempted from the obligation of brakes the only trailers under the double condition
that their total weight authorized in load does not exceed 750 kg nor half of the pure weight
of the truck tractor.
X-Pro D140 is not a transport trailer, it is strictly forbidden to transport people or products
related to the application of the machine.
User manual - X-PRO D140 202105-515-ENGP8
3. YOUR MACHINE
3.1. DESCRIPTION
Thermal engine machine for spraying shotcrete or pumping products such as liquid screed.
Made in Spain, it is equipped with a button control panel for simplied use, an automatic accelerator, motor
and hydraulic pump with adjustable ow-rate.
The safety devices comply with the standards in place and the hydraulic circuits are protected against
possible blockages of the rotating elements. An air cooler ensures that the oil temperature is maintained
within the correct range.
3.2. TECHNICAL CHARACTERISTICS
Motor Kohler KDW 1404
Motor power 19 kW
Fuel Gasoil
Diesel tank 25 L
Cooling liquid
Speed of rotation 2600 RPM
Number of cylinders 4
Consumption 4,1 L/h
Hydraulic system 40 L
Engine monitoring panel complete
Hydraulic controls electrical/manual
Pump speed setting yes
Automatic accelerator control yes
Hopper capacity 190 L
Variable ow up to 14 m3/h
Pressure from 0 to 30 bar
Maximum grain size up to 8 mm
Pump 60R12
Pump reverse operation yes
HP washer max pressure 140 bar
HP washer ow-rate 11 L/min
Overall length with tow bar 3,66 m
Overall length without tow bar 3,28 m
Overall width 1,24 m
Height at the highest point 1,28 m
Weight when full with oil and diesel 720 kg
Delivery height 80 m
Max. hose length 120 m
Delivered with
- a Ø50 x 20 m hose
- two cleaning balls Ø50
- a grease pump with a grease cartridge
- a complete high pressure washer lance
- a 10 m high pressure washer hose
- a storage carry-case
11
10
12
4
1
5
2
6
9 8
7
3
202105-515-ENG User manual - X-PRO D140 P9
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS
1Hydraulic oil level 7Adjustable pump
2Engine oil level 8Product pressure control manometer
3Electric circuit breaker 9Pump outlet
4Motor ange lubricator 10 Jockey wheel
5Diesel tank cap 11 Hood clips
6Hopper vibrator 12 Emergency stop
15
17
20
22 23
21
18
16
19
13c 13e
14
13a
13b 13d
User manual - X-PRO D140 202105-515-ENGP10
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS (continued)
13 Diesel engine display
13a Low fuel level (diesel).
13b Battery (lights up when the alternator does not charge
the battery).
13c Oil (lights up when oil pressure is insufcient).
13d Cooling liquid (lights up when the maximum operating
temperature is reached and causes the engine to stop).
13e Pre-heating (switches off when the pre-heating
temperature is reached).
14 Hour meter
15 Switching on the machine and starting the engine
16 Washer circuit pressure manometer
Maximum pressure 150 bar.
17 Screw hopper circuit pressure manometer
Maximum pressure 250 bar.
18 Flow rate adjustment indicator
Maximum pressure 25 bar.
19 Flow rate adjustment knob
To be adjusted according to the type of product used.
20
Product pump rotation control switch
Reverse: right position with spring return to the centre.
Stop: centre position.
Forward: left position maintained.
21 HP washer switch: On (right position) / Off (left position)
22 Hopper vibrator control
23 Remote control plug
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Bomba de agua de EUROPRO
Manuales populares de Bomba de agua de otras marcas
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guía de solución de problemas
DUROMAX
DUROMAX XP WX Series Manual de usuario
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manual de usuario
Franklin Electric
Franklin Electric IPS Manual de usuario
Xylem
Xylem e-1532 Series Manual de usuario
Milton Roy
Milton Roy PRIMEROYAL Manual de usuario