EUROPRO MIXPRO 28 CLASSIC Manual de usuario

MIXING PUMP

MIXPRO 28 CLASSIC

MANUAL INSTRUCTIONS

ORIGINAL INSTRUCTIONS

Revision n…… of ……

EUROPE PROJECTION - 228 Avenue Olivier Perroy, 13790 Rousset

Tél : 00 33 (0)4 42 29 08 96 – Fax : 00 33 (0)4 42 53 44 36

SAS au capital de 400 000€ - SIREN 394 961 510 – NAF 2892 Z

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.2

GENERAL INDEX

CE MARKING ..................................................................................................3

FINAL TESTING AND COMMISSIONING...............................................................3

RESERVED RIGHTS .........................................................................................3

DECLARATION OF CONFORMITY ........................................................................4

TECHNICAL DATA............................................................................................5

DIMENSIONS OF THE MACHINE.........................................................................5

PARTS LIST....................................................................................................7

PACKAGING ...................................................................................................8

UNPACKING ...................................................................................................9

USE DESTINATION ..........................................................................................9

DISPOSAL......................................................................................................9

SAFETY INSTRUCTIONS ................................................................................. 10

RESIDUAL RISKS .......................................................................................... 11

FORESEEABLE INCORRECT USE....................................................................... 11

ASSEMBLING OF ROTOR AND MIXER................................................................ 12

WATER AND AIR CONNECTION........................................................................ 13

CONNECTION OF THE MATERIAL CONVEYING TUBE............................................ 13

CONNECTION OF THE MATERIAL CONVEYING AND AIR TUBES TO THE SPRAYING

NOZZLE....................................................................................................... 14

ELECTRICAL CONNECTIONS............................................................................ 15

COMPRESSOR ELECTRIC CABLE CONNECTION ................................................... 15

CONTROL PANEL........................................................................................... 16

CHECKS BEFORE SWITCHING ON .................................................................... 17

MACHINE PREPARATION ................................................................................ 18

SPRAYING OF THE MATERIAL.......................................................................... 19

WORK BREAK ............................................................................................... 19

CLEANING OF CHAMBER MIXING ..................................................................... 20

CLEANING THE HOPPER ................................................................................. 20

CLEANING THE MATERIAL HOSE...................................................................... 20

CLEANING OF THE SPRAYING NOZZLE AIR TUBE................................................ 21

SWATER DRAINAGE DURING WINTER PERIOD................................................... 21

RESEARCH OF MALFUNCTIONS ....................................................................... 22

ROUTINE MAINTENANCE ................................................................................ 24

WARRANTY .................................................................................................. 25

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.3

CE MARKING

FINAL TESTING AND COMMISSIONING

(by the Manufacturer or the authorized Dealer)

The machine is already tested at the Manufacturer's premises.

The commissioning of the machine at the client is carried out by Manufacturer

or the Authorized Dealer.

At the end of the testing, the Manufacturer or Authorized Dealer fills in the

testing and commissioning certificate, which is signed by the testing

technician, the operator in charge (or any other authorized operator), and by

the safety manager, who shall certify the positive result of the same.

RESERVED RIGHTS

The contents on this manual can’t be reproduced and disclosed (totally or

partially) without written authorization of the Manufacturer.

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.4

EUROPE PROJECTION

228 Avenue Olivier Perroy, 13790 Rousset

Tél : 00 33 (0)4 42 29 08 96

Fax : 00 33 (0)4 42 53 44 36

SAS au capital de 400 000€

SIREN 394 961 510 – NAF 2892 Z

DECLARATION OF CONFORMITY

In accordance with the Directive 2006/42/CE – D.Lgs 17/2010

DECLARES UNDER ITS OWN RESPONSIBILITY THAT THE MACHINE

Type : PLASTER, E.W.I

Year of construction: 2022

It’s conformed to the following European Directives and the following modifications:

Directive 2006/42/CE, recognize in Italy with D.Lgs. 17/2010 (Machinery

Directive)

Directive 2014/35/CE (Low Voltage Directive) recognize in Italy with D.Lgs. 19

Maggio 2016, n. 86

Directive 2014//30/CE (Electromagnetic Compatibility)

And the following standards:

EN 60204-1:2016 Safety standard of the electrical equipment of machines

EN 12100-1 and 2 Machinery Safety – Essential concepts, main design

principles

The technical dossier is kept by Manufacturer.

Signed

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.5

TECHNICAL DATA

The models available of the machine: MIXPRO 28 CLASSIC

MODELS POWER SUPPLY WATER SUPPLY

PLASTER 230 v – 50 Hz Water

E.W.I. 230 v – 50 Hz Water

Protection grade of switchboard: IP44

Hopper capacity: 70 litres

Water pump flow rate: 8-26 litres/min

Max. served distance: 40 meters

Weighted noise pressure level “A”: 92 dB

DIMENSIONS OF THE MACHINE

MODEL DIMENSIONS (cm) WEIGHT (without tubes)

MIXPRO 28 CLASSIC A=159 B=95 C=60 130 kg

A= Height B= Width C= Depth

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.6

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.7

PARTS LIST

1) Protective grid

2) Hopper

3) Stator

4) Material outlet coupling

5) Gearmotor

6) Toolbox

7) Trolley

8) Gearmotor unit locking device

9) Control panel

10) Electrical socket for compressor

11) Motor flange

12) Locking device for hopper lifting

13) Gearmotor unit pin

14) Flow meter

15) Water flow-control valve

16) Water inlet coupling

17) Water hose for mixing chamber

18) Hopper locking device

19) Service tap

20) Air outlet coupling

21) Gear motor power plug

22) Lance plug

23) Main power plug

24) Polyurethane mixing chamber

25) Wheels

26) Mixing shaft

27) Safety grid fixing screw

28) Water systems drain

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.8

PACKAGING

Usually the machine is packaged by the Manufacturer on wooden pallet,

fastened with straps and wrapped with a film.

List of supplied loose components:

No. 1 Mixer shaft;

No. 1 Rotor;

No. 1 Stator;

No. 1 “T” spanner for installing the rotor;

No. 1 Water hose;

No. 1 Air hose;

No. 1 Complete lance, alu tube (Plaster model);

No. 1 lance for glue (E.W.I. model);

No. 1 Finishing lance cable (E.W.I. model);

No. 1 Instruction manual;

No. 1 Antigrip spray for mounting rotor;

No. 1 Rod for mounting rotor;

No. 1 Tool bag

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.9

UNPACKING

1) Remove the protective film;

2) Remove the above components from the hopper protection grid

3) With a proper tool, cut the straps paying attention not to be hit by the

same due to their elasticity;

4) With the help of a second operator, let the machine carefully get off the

pallet lifting it using the proper handles positioned on the machine sides;

USE DESTINATION

The machine has been designed and manufactured for the following destination

of use:

Any other different use is potentially inappropriate.

DISPOSAL

At the disposal time of the machine, compulsorily observe the provisions of the

regulations in force.

Separate the parts making up the machine according to the different

construction materials (plastic, copper, iron, etc...).

Lubricant liquids and any other fluids shall absolutely not be dispersed in the

environment.

DESTINATION

OF USE

Building sector.

PLACE OF

WORK

Building site, iside or outside sufficiently lightted

and suita-ble buldings

complying with the

regulations in force in the country of use on safety

and health on work positions. The machine has to

lean on a surface assuring its stability whit

reference to its weight and its overrall dimen-sions

FORESEEN

USE

Mixing and spraying of pre-mixed products having

a max. granulometry of 3 mm, suitable for

plastering and mechanical processing.

CHARGED

WITH THE

USE

A single authorized operator meeting the

professional requi-rements described in par.

Instruction Manual MIXPRO 28 CLASSIC EUROPRO pag.10

SAFETY INSTRUCTIONS

1. The machine use is only reserved to qualified and trained staff in

according to the safety provision law.

2. Always remove the voltage, turning off master switch, before to do any

operation on the machine.

3. The master switch has also the stop emergency function in case of

necessity.

4. Conform to use destination of the machine described in the in the

specific chapter.

5. The disconnection of the material conveying tube, it is compulsory to

done only with pressure at zero of pressure gauge.

6. Consult the instructions of pre-mixed products, before to use the

machine

7. The machine is not suitable to use in environments with potentially

explosive atmospheres (Atex)

8. Only one operator at time on the machine

9. The machine has not been conceived for to transport and/or lift persons

and things.

10. Pay attention to transport the machine on slopes, danger to be run over

11. It is absolutely forbidden to tamper, disconnect and/or remove any

safety device existing in the machine.

12. For the safe use of the machine are recommended the following

personal protective equipment: safety footwear, protective gloves from

chemicals, goggles or face shield, earmuff.

13. Don’t introduce objects thought the hopper protection grating. Don’t use

the machine with the open grating.

14. It is absolutely forbidden to tamper the calibration of pressure reduction

valve.

15. Don’t step or pull tubes and the electrical connections.

Tabla de contenidos

Otros manuales de Mezclador de EUROPRO

EUROPRO

EUROPRO KM550E Manual de usuario

EUROPRO

EUROPRO MIXPRO 70 Manual de usuario

EUROPRO

EUROPRO EP595H Manual de usuario

EUROPRO

EUROPRO MIXPRO 14 Manual de usuario

EUROPRO

EUROPRO MIXPRO 28 CLASSIC PLASTER Manual de usuario

EUROPRO

EUROPRO MIXPRO 100 Manual de usuario

EUROPRO

EUROPRO EP585W Manual de usuario

EUROPRO

EUROPRO EP585 Manual de usuario

EUROPRO

EUROPRO MIXPRO 100 Manual de usuario

EUROPRO

EUROPRO EP585L Manual de usuario

Manuales populares de Mezclador de otras marcas

Bosch

Bosch GRW 9 Manual de usuario

MULTIQUIP

MULTIQUIP Whiteman WM45E Guía

KitchenAid

KitchenAid KSM7581BZ0 Guía rápida

Jay-Lor

Jay-Lor 5050 Manual de usuario

Sunbeam

Sunbeam FPSBSM210X Manual de usuario

MULTIQUIP

MULTIQUIP Whiteman MC94S Guía

Thinky

Thinky ARE-250 Manual de usuario

Midas

Midas XL4 Manual de usuario

bianco

bianco PURO 4 Manual de usuario

Paso

Paso DAG9200 Manual de usuario

Sima

Sima SFX-9A Manual de usuario

better chef

better chef IM-815WC Instrucciones de instalación

ALLEN & HEATH

ALLEN & HEATH GR1 Manual de usuario

Lacor

Lacor 69083 Hoja de especificaciones

M-Audio

M-Audio Midiman SAM Manual de usuario

Buffalo

Buffalo CP921 Manual de usuario

Pentair

Pentair HYPRO Cleanload 3376-0870 Instrucciones de operación

Cuisinart

Cuisinart SM50WHE Manual de usuario