3
2. Safety instructions
2.1 Care obligation of customer
The sharpening machine ERM.100/3 was designed and produced after giving due consideration to
danger analysis and after careful analysis of appropriate harmonized standards, as well as the
further technical specifications. It conforms to the status of the latest technology and guarantees
maximum possible safety.
However, the specified safety level can only be achieved if the necessary measures are taken during
operation. The care obligation of the customer includes planning these measures and controlling
their execution.
The customer must especially ensure that:
-The machine is used properly according to the specification (please refer chapter 1.
Production description);
-The machine should only be operated in faultless and functionally sound condition. In
particular the safety devices are to be checked for proper functioning regularly;
-These original instructions need to be available in full and legible condition at the location
where the machine is operated;
-Personnel handling the machine need to be provided with adequate instructions on work
safety and environment protection on a regular basis. The operator needs to have read and
understood the operating instructions document and the safety measures defined in them in
particular;
-All the safety and warning signboards near the machine are not to be removed and are
maintained in readable condition.
2.2 Explanation of the used safety signs
The following safety signs have been used in the present operating instructions document: These
signs are supposed to attract the attention of the reader to the text of the adjacent safety
instruction. These signs indicate that there is danger to the life and health of persons.
