ETS-Lindgren OMS Manual de usuario
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
Sample Draw
Oxygen
Monitoring System
(OMS)
User Manual
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
ETS-Lindgren Inc. reserves the right to make changes to any product described
herein in order to improve function, design, or for any other reason. Nothing
contained herein shall constitute ETS-Lindgren Inc. assuming any liability
whatsoever arising out of the application or use of any product or circuit
described herein. ETS-Lindgren Inc. does not convey any license under its
patent rights or the rights of others.
© Copyright 2013 by ETS-Lindgren Inc. All Rights Reserved. No part of this
document maybe copied byany means without written permission from
ETS-Lindgren Inc.
Trademarks used in this document: The ETS-Lindgren logo and OMS are
trademarks of ETS-Lindgren Inc.; NEMA is a registered trademark of NEMA;
3M and Scotch-Brite are trademarks of 3M.
Revision Record
MANUAL,OXYGEN DEFICIENCY MONITOR | Part #399374, Rev. B
Revision
Description
Date
A
Initial Release
August, 2013
B
Updated Introduction; added
installation location information;
added Sample Draw Sensor
Tubing
December, 2013
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
Table of Contents
Notes, Cautions, and
Warnings..............................................vii
1.0
Introduction..........................................................................9
Technology................................................................................................. 9
Long-Life Zirconium Oxide Sensor Cell............................................... 9
Smart Electronics.............................................................................. 10
Standard Configuration............................................................................. 10
Optional Remote Display.......................................................................... 10
Other Optional Items................................................................................. 11
ETS-Lindgren Product Information Bulletin ............................................... 11
2.0
Maintenance ....................................................................... 13
Recommended Routine Maintenance....................................................... 14
Every 6-12 Months............................................................................ 14
Annually............................................................................................ 14
Replacement and Optional Parts .............................................................. 15
Service Procedures .................................................................................. 15
3.0
Specifications..................................................................... 17
Electrical Specifications ............................................................................ 17
Physical Specifications ............................................................................. 17
Performance Specifications ...................................................................... 18
Gas Detection System Specifications........................................................ 18
Signal Outputs.......................................................................................... 19
Default Factory Settings............................................................................ 19
4.0 Component
Views
..............................................................21
Front View Exterior................................................................................... 21
Front View, Cover Removed..................................................................... 23
Transmitter Interior ................................................................................... 25
Alarm Relay Board.................................................................................... 26
5.0 Before You Begin
Installation...........................................27
Site Requirements.................................................................................... 27
Connect to 24 VDC Regulated Power....................................................... 28
Connect OMS and Sensor Before Powering............................................. 28
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
Do Not Exchange the Sensor Electronics.................................................. 28
Use Proper Calibration Steps.................................................................... 28
Keep Away From Silicone Compounds..................................................... 29
Keep Away From High Air Flow ................................................................ 29
Keep Away From a Water Stream............................................................. 30
6.0
Installation..........................................................................
31
Mounting the OMS.................................................................................... 31
Transmitter and Sensor..................................................................... 32
Enclosure Mounting Feet .................................................................. 33
Dust Filter......................................................................................... 34
Sample Draw Sensor Tubing.................................................................... 35
Using an Available Waveguide.......................................................... 36
Using Kit 551060 to InstallWaveguide.............................................. 37
Wiring....................................................................................................... 39
Installing the Optional Remote Display...................................................... 40
Connecting a Remote Horn and Strobe to OMS........................................ 42
Connecting a Remote Fan Contactor to OMS........................................... 43
Initial Startup............................................................................................. 44
7.0
Operation ............................................................................
47
Joystick Operation.................................................................................... 47
Main Operation Mode ............................................................................... 48
Internal Sample Flow Rate........................................................................ 48
Signal Outputs.......................................................................................... 48
Instrument Faults...................................................................................... 49
Loss of Power Indicator ............................................................................ 50
Alarm Reset.............................................................................................. 50
8.0 Programming the
OMS
......................................................
51
Program Flowchart ................................................................................... 52
Passwords................................................................................................ 57
Enter Password ................................................................................ 57
Change Password............................................................................. 58
Enable/Disable Password Function................................................... 59
Main Menus and Submenus ..................................................................... 60
Set 4–20 mA Loop............................................................................ 60
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
Set Formats...................................................................................... 61
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
Set Alarm Threshold Parity............................................................... 63
Set Latching...................................................................................... 65
Reset Latching Alarm........................................................................ 66
Set Alarm Delay................................................................................ 67
Set Zero Suppression....................................................................... 67
Set Alarm Thresholds ....................................................................... 68
Set Alarm Hysteresis ........................................................................ 70
Set Sensor Adjust............................................................................. 72
9.0 Sensor
Verification ............................................................
73
Required Gas and Equipment................................................................... 74
Sensor Verification Procedure .................................................................. 74
Sensor Verification to Nitrogen.................................................................. 75
Sensor Verification to Known Concentration of Oxygen ............................ 76
Appendix A:
Warranty.............................................................
77
www.fmgrupotec.com fmgrupotec@fmgrupotec.com 0034.903.360.306 Calle Algepser n16 Parque Empresarial Tactica- 46980 Paterna (Valencia)- España
This page intentionally left blank.
vii
www.ets-lindgren.com
Notes, Cautions, and Warnings
Note: Denotes helpful information intended to
provide tips for better use of the product.
Caution: Denotes a hazard. Failure to follow
instructions could result in minor personal injury
and/or property damage. Included text gives proper
procedures.
Warning: Denotes a hazard. Failure to follow
instructions could result in SEVERE personal injury
and/or property damage. Included text gives proper
procedures.
See the ETS-Lindgren Product Information Bulletin for safety,
regulatory, and other product marking information.
This page intentionally left blank.
Otros manuales para OMS
1
Tabla de contenidos
Manuales populares de Equipo de laboratorio de otras marcas
Agilent Technologies
Agilent Technologies 5800 ICP-OES Manual de usuario
Endress+Hauser
Endress+Hauser Cleanfit CPA875 Manual de usuario
NI
NI PXI-5422 Manual
Collomix
Collomix Aqix Manual de usuario
SPEX SamplePrep
SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario
Ocean Insight
Ocean Insight FLAME-NIR+ Manual de usuario
