ETOE A1192 Manual de usuario
Projector A1192
User Manual
DE
EN
01 - 11
IT
12 - 22
FR
23 - 33
ES
34 - 44
JP
45 - 55
56 - 66
Catalog
English
Deutsch
Español
Français
Italiano
日本語
EN
01
Readandunderstandallinstructionsbeforeyouusethisdevice.
Donot makeanychangesorsettingsthatarenotdescribedinthismanual.Any physical
injury, and loss of data or damage caused by failure of following instructions, is not
included in the warranty.
Setup
Toreducetheriskoffireand/orelectricshock,donotexposethe device to rain or
moisture, and objects filled with liquids, such as vases, shouldnotbeplacedonthedevice.
Donotplacethedeviceonsoftsurfacessuchastableclothsor carpetsasdoingsocould
beafire-hazard.
Donotplacethedeviceinareassusceptibletoexcessivedustanddirtornearany
appliancegeneratingastrongmagnetic field.
Topreventoverheating,donotblockorclogtheventilationopenings.
Neverplacethedeviceinaconfinedspace.Alwaysleaveenoughspacearoundthe
deviceforventilation.
Protectthedeviceagainstdirectsunlight,heat,largetemperature fluctuationsand
moisture.
Whenthedevicerunsforalongperiodoftimeandthesurface becomeshot,shutitdown
andunplugthepowercord.Resume operationonlyafterthedevicehascooled.
Alwayshandlethedevicewithcare.Avoidtouchingthelens.
Neverplaceheavyorsharpobjectsonthedeviceorthepowercord.
Toavoidelectricshock,donotdisassemble.
Onlyuseattachmentsoraccessoriesspecifiedbythemanufacturer.
Avoidextremevibration.Itmaydamagetheinternalcomponents.
Donotallowchildrentohandlethedevicewithoutsupervision.
Underthefollowingconditions,alayer ofmoisturecanappearinsidethedevicewhichcan
leadtomalfunctions:
a)ifthe device ismovedfromacoldtoawarmarea;
b)after acoldroomisheated;
c)whenthedeviceis placedinadamproom.
Toavoidany moisture,sealthedeviceinaplastic bag before moving itto anotherroom,
andwait for one to two hours before you take it out of the bag.
PowerSupply
Useonlytheprovidedpoweradapter.
Poweroffthedevicebeforeremovingthepowersupplyfromthesocket.
Protectthepowercordfrombeingwalkedonorpinched,particularly atplugs,
conveniencereceptacles,andthepointwheretheyexitfrom thisdevice.
Unplugthisdeviceiftherearelightningstormsorwhenunusedfora longperiodoftime.
Wherethepowerplugoranappliancecouplerisusedasthedisconnectdevice,the
disconnectdeviceshallremainreadilyoperable.
Beforeyoumakeorchangeanyconnections,ensurethatalldevices aredisconnected
fromthepoweroutlet.
Nevertouchthepowercableorthepowerconnectorwithwethands.
SafetyInstructions
02
HearingSafety
Toavoidhearingdamage,donotlistenforextendedperiodsathigh volume.Setthe
volumeatasafelevel.
Cleaning
Poweroffthedeviceandremoveitfromthepowersupplybefore cleaningthesurface.
Useasoft,lint-freecloth.Neveruseliquid,gaseous,oreasily flammablecleansers(like
sprays,abrasives,polishes,andalcohol).
Donotuseanyliquidcleaningagentstocleanthelensastheymaydamagethe
protectivecoatingonthelens.
Wipeoverthesurfacesgently.Becarefulthatyoudonotscratchthesurfaces.
Uselenscleaningpapertocleanthelensoftheprojector.
Repairs
Donotmakeanyrepairstothedeviceby yourself.Onlyhaveyourdevicerepairedbyan
authorizedservicecenter.
Impropermaintenancecanresultininjuriesordamagetothedevice.
Referallservicingtoqualifiedservicepersonnel.
Caution:
Possiblyhazardousopticalradiationis emittedfromthisdevice.
Donotstareatoperatingbeam.Thebrightlightmayhurtyoureyes.
What’s included
User manual x 1
Adapter x 1
Remote control x1
Projector x 1 Adapter AC cord x 1
Projector A1192
User Manual
Overview
1. 19V DC in
2. USBport
3. HDMI in
4. Reset
5. Infrared receiving window
6. 3.5mm AUX
7. Power Switch
Projector
5
21 3
7
4
6
03
Remote
1. Power
2. Mute
3. OK
4. Up
5. Down
6. Right
7. Left
8. Back
9. Google Assistant
10. Home
11. Volume -
12. Volume +
13. NETFLIX
14. Prime Video
15. Projector Focus
16. Projector Home
4
1
7
5
8
3
2
6
9
10
12
14
16
13
11
15
04
Get started
1. Placement
Place ETOE Projector A1192 on a stable, flat foundation in front of the
projection surface. For the best results, the projection surface should be
white and flat.
It is unnecessary to tilt the projector towards the projection surface. You
can correct the projection image with the built-in keystone correction and
with remote control.
The distance between the projector and the projection surface
determines the image size.
2. Prepare the Remote Control
1. Prepare 2 x AAA battery, which is not included in the box.
2. Slide off the back cover to open the battery compartment, insert new
batteries (matching the polarity (+/-) indicated), and close the battery
compartment.
3. Power On
1. Connect the included adapter to the DC-in port of the projector
2. Connect the AC cord to the adapter
3. Plug the adapter to the outlet and the LED indicators will light on.
4. Angle the projector towards a suitable projection surface or wall.
4. Focus
1. Place the projector towards a suitable projection surface or wall,
2. Use the remote control, Press the [Focus] button,
3. Press the [Left] or [Right] button, until the picture is clear.
3
2
1DC IN
05
5. Select Your Language
When start the projector for the first time, you will be guide to a page to
select language as first step, use remote control [up] or [down] to select
your language.
6. Pair Remote Control in Bluetooth Mode
After select language, you will be at a Bluetooth remote pairing
page(Your remote control need to be at Bluetooth mode to control
Android TV)
1. Please hold the remote near the projector.
06
2. Press the [Volume-] and [OK] keys together for about 10 seconds.
3. When the screen shows “Connected”, and your remote LED indicator
turn to blue, The Remote Bluetooth mode is pair and connected.
To switch Remote control between Bluetooth mode and IR mode,
press the [Projector Home] button or [Home] button.
Press the [Projector Home] button, the remote LED indicator turns
“RED”, and projector will turn to [Projector Home Page], you will use the
Remote IR mode for projector control.
Press the [Home] button, the remote LED indicator turns “Blue”, and
projector will turn to [Android TV] system, you will use the Remote
Bluetooth mode for Android TV control.
Follow the on-screen instruction to finish other settings.
07
7. Keystone correction
ETOE projector A1192 supports automatic vertical keystone correction,
and remote four-point keystone correction.
1. Place the projector towards a suitable projection surface or wall, adjust
the distance for a proper size of picture.
2. Focus the picture perfectly clear.
3. If your projector is directly towards the projection surface, but pointing
up and down, the picture will be adjusted automatically. You can still
press the [Projector Home] button, go to [Projection Setting] >
[Four point correction] for further minor adjustment, till the picture is
perfectly rectangular.
4. If your projector is not vertical to the projection surface, use remote
control, Press [Projector] button, go to [Projection Setting] - [Four
point correction].
5. Press [OK] to select the point, 4[Navigation button] to adjust, until the
picture is perfect rectangular.
Automatic
Remote 4P
keystone
08
Projector Settings
ETOE Projector A1192 have two systems, The [Projector system] and the
[Android TV] system, So, the projector setting and Android TV setting is
separated, When setting the projector, Press the [Projector Home] Button
back to projector home page, go to [Setting].
1. Projection setting
Projection mode
[Desktop Front Projection]:The deviceislocatedinfrontoftheprojection
surface.
[Desktop Rear Projection]:Thedeviceislocatedbehindtheprojection
surface.
[Ceiling Front Projection]:Thedevice is hanging fromtheceiling in an
upside-down position.Theimage is rotated by 180 degrees.
[Ceiling Rear Projection]:Thedevice is hanging fromtheceilinginan
upside down position behind the projection surface. The image is rotated by
180degrees andhorizontallymirrored.
Zoom in/out
Use the remote control, zoom in or out from 50%-100%, fit the image size in a
certain screen
Vertical correction
Vertical keystone correction from 0-100
Horizontal correction
Horizontal keystone correction from 0-100
Four point Correction
Use the remote control, [OK] to select the point, 4[Navigation button] to
adjust, [Back] to exit
Keystone correction reset
Reset Keystone correction value
2. Other settings
Default Input Signal
[Android TV]/[HDMI]/ [USB]/[off]
Select default display signal source from Android TV/HDMI/USB, or go to
home page, When turn on or reboot the projector.
No need switch signal source every time when the projector is turned on.
Language setting
Select your language from [English], [Deutsch], [Français], [Italiano], [Español],
[日本語], [한국어].
Restore factory setting
Reset your device and restore factory setting.
Otros manuales para A1192
1
Tabla de contenidos
Idiomas:
Otros manuales de Proyector de ETOE
