eSecure ES00M140 Manual de usuario
1
H.264 DVR Quick Start Guide Version 1.a
Model: ES00M140, ES00M180
1 Introduction.................................................................................................................................................2
1.1 Safety Information............................................................................................................................2
1.2 Contents of the box..........................................................................................................................2
1.3 Hard disk installation.......................................................................................................................2
1.4 Front panel........................................................................................................................................3
1.5 Rear panel.........................................................................................................................................4
1.6 Mouse Control ………………………………………………………………………………………….…..4
2 Basic operation...........................................................................................................................................5
2.1 Login System............................................................................................................................5
2.2 Main Menu..................................................................................................................................5
2.2.1 System setup.................................................................................................................6
2.2.2 Format Hard Drive…………………………………………………...…………………….. 8
2.2.3 Record................................................................................................................................9
2.2.4 Playback.........................................................................................................................10
2.2.5 Network...........................................................................................................................12
2.2.6 Web View........................................................................................................................13
3 Appendix ……………………………………………………………………………………………………………..14
A. Network Security Setting……………………………………………………………………………………14
B. Connection Setting…………………………………………………………………………………..………15
Before You Begin
2
1. Introduction
1.1 Safety Information
•Before setting up the DVR, carefully read all the documentation that came with your package.
•To prevent fire and shock hazard, never expose the DVR to rain or moisture.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service
technician or your retailer.
•Before using the product, make sure all cables are correctly connected and the power cables
are not damaged. If you detect any damage, contact your dealer immediately
•The DVR should be operated only by the type of power source indicated on the label. If you
are not sure of the type of power supplied to your home or office, consult your dealer or the
local power company
1.2 Contents of the box
1. DVR device
2. Quick Start Guide
3. CD
4. Remote Control
5. Power and Power cord
6. Mouse
1.3 Hard disk installation
Before the first use，please install the hard disk.
Before you can record onto your HDD it should be formatted by the DVR system,
because standard PC formatting is not compatible. The format process can take several
minutes.
Your HDD should be installed inside the DVR. Please connect the(Hard Disk (HDD) in the following
way. Screw the HDD into the HDD brackets or DVR base. All necessary cables are included in the
package with the DVR. Use the instructions that came with the hard drive for exact wiring and
3
installation. Please connect the power cable to the appropriate socket, and the data cables to their
corresponding connectors.
1. Loosen the cover screw 2. Remove the cover 3. Insert the hard disk
4. Tighten the hard disk screw 5.Connect the data wire 6.Connect the power wire
7. Cover the machine 8. Tighten the cover screw
1.4 Front panel
(1) IR remote receiver (2) Record indicator light (3) Power indicator light (4) ESC (5) Left / Up / Down / Right / Menu/ Enter
4
1.5 Rear panel
4CH 8CH
(1) Video inputs (2) BNC outputs (3) Audio input (4) Audio output (5) USB (6) Network
(7) Power supply (8) VGA output (9) Power Switch (ESOOM140 without this switch)
1.6 Mouse Control
You can use a mouse to operate the DVR as well. The mouse operates just like a mouse on a
Windows PC. Please connect the mouse tone of the USB connectors (#5) in the back panel and
please note that you can hot-plug the mouse.
Right clicking
In live display mode, right clicking will either display or hide the tool bar.
In main menu or sub menu mode, right clicking will exit current menu.
Note: the settings will not be saved after right clicking.
Left clicking
When in menu unlock mode in the tool bar left click on the SYSTEM SETTINGS icon to enter into
the main menu.
After entering the main menu, left clicking will enter sub menus.
On [detail files] menu mode, left clicking will playback one recording file.
By left clicking you can select values in edit boxes or pull-down menus The system supports
Chinese character inputs, special symbols, numbers and letters.
On the playback interface left clicking can control the >> forward function, << reverse function, >> I
Slow play function, I > frame play function, > Play function, and X exit function.
You can left click to adjust color control bar, volume control bar and screen control bar.
On the main menu, sub menu or playback view, you can left click “x” to exit the current menu.
You can left click to change the status box of a check box in the motion detection area.
Double clicking
left key
On the live view or playback video, double-clicking will maximize the screen.
Double clicking on the maximized screen will return it to the multi camera view.
Mouse drag In the Motion Detection setting interface, you can left click to drag
Mouse, and drag the frame to set the motion detection area.
Use the mouse to select menu items.
.
5
Getting Started and Main Menu
2. Basic operation
2.1 Login System
In preview mode you can right click the mouse to get a desktop shortcut menu.
Right click the mouse again, and you will see the following:
Input your username and password and select OK.
Note: The default password for admin is blank when you receive the new DVR.
2.2 Main Menu
After logging into preview mode, you can right click the mouse to get a desktop shortcut menu.
Right click mouse again and select the Main Menu
6
When the Main Menu appears, click the system icon in the main menu shown below:
2.2.1 System setup
Set all the system parameters by clicking each icon .i.e. Language, Date/Time, Account, GUI
Display, and Video. After setting all the parameters, click “Exit” on the System Menu.
—> —>
7
Click [Language] ---> Select your language from the drop down menu.
Then click “OK”.
【System time】Set the system date and time on the Date/Time Menu
Enter the month, date, and time using the virtual keypad
8
【DST】Click for Daylight Saving Time.
Daylight savings time “On” means DST is enabled. You can setup the start time and end time of DST.
2.2.2 Format Hard Drive
If you install a new hard drive (HDD), you must format the HDD before using it to record. To format a
drive, go back to the main menu, click > the HDD Manage Icon on the Main Menu screen
—> —>
Select the preferred HDD > on the HDD Manage screen. Click【Format Disk】then Click 【OK】to
complete.
9
2.2.3 Record
The User needs to install and format a HDD, and set all the recording parameters before recording.
There are 2 record modes: Scheduled, and Manual, along with Stop for (No record).
Note: Record frame rate, resolution, quality and hard drive space will affect the total recording time of
DVR system.
Note: All parameters will affect the recording time length for HDD. Recording higher quality images at
a higher frame rate will result in a shorter recording time for the same size HDD.
—> —>
To set the recording parameters click the “Record icon” on the Main Menu. You will set the recording
parameters on the following screen.
【Resolution】Indicates the setup resolution and code rate for recording. There are four options:
D1.HD1, CIF and QCIF.
【Frame Rate】In this section, you can choose the recording frame rate (frames per second) for the
current channel. The higher the record frame rate, the more natural movement you will see in
playback mode.
【Quality】There are several options: Choose the one that is the best for your purpose.
【REC. Mode】There are three options: Schedule, Manual and Stop. Click the REC. Mode field and
you will be taken to the menu below.
SCHEDULE: This setup function allows you to create a schedule for recording tasks throughout the
week, so that only certain selected events are actually recorded on the HDD. For example, you may
setup the system to record non-stop throughout your normal business hours, making it a
10
schedule-triggered recoding at lunch time (that means no recording will be performed unless an
alarm event happens), night time being set to motion detection recording with certain hours made
more secure with the combined schedule and motion detection triggered recording, finally making it
more sophisticated by specifically setting a no-record time slot when you stay in the office alone in the
wee hours of weekday mornings. You can setup any schedule that fits your needs..
Please note that manual recording overrides all record settings and will be carried on until stopped by
the operator.
CHANNEL: You can select all channels or just one channel. You can also copy the settings from one channel to
other.
—>
【REC. Size】It will pack by the time you selected.
Click “OK” and “OK” again in each following menu to return to the Main Menu.
Note: ES00M140,ES00M180 both do not have the “ Alarm” function.
2.2.4 Playback
The DVR supports live recorded playback, and time search. Select Main Menu > Playback > Search
—> —>
Otros manuales para ES00M140
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de DVR de eSecure
