ESD electronic PMC-ETH2 Manual de usuario
PMC-ETH2 Hardware Manual Rev. 1.0
PMC-ETH2
2-Port Fast-Ethernet Ada
p
ter
Hardware Manual
PMC-ETH2 Hardware Manual Rev. 1.0
Document file: I:\texte\Doku\MANUALS\PMC\PMC-ETH2\Englisch\PMC-ETH2_10H.en9
Date of print: 25.02.2005
PCB version: PMCET2 Rev. 1.2
Chan
g
es in the chapters
The changes in the document listed below affect changes in the hardware as well as changes in the
description of the facts, only.
Chapter Changes as compared with previous version
- First issue
--
Technical details are subject to change without further notice.
PMC-ETH2 Hardware Manual Rev. 1.0
N O T E
The information in this document has been carefully checked and is believed to be entirely reliable. esd
makes no warranty of any kind with regard to the material in this document, and assumes no
responsibility for any errors that may appear in this document. esd reserves the right to make changes
without notice to this, or any of its products, to improve reliability, performance or design.
esd assumes no responsibility for the use of any circuitry other than circuitry which is part of a product
of esd gmbh.
esd does not convey to the purchaser of the product described herein any license under the patent rights
of esd gmbh nor the rights of others.
esd electronic s
y
stem desi
g
n
g
mbh
Vahrenwalder Str. 207
30165 Hannover
Germany
Phone: +49-511-372 98-0
Fax: +49-511-372 98-68
E-mail: [email protected]
Internet: www.esd-electronics.com
USA / Canada:
esd electronics Inc.
12 Elm Street
Hatfield, MA 01038-0048
USA
Phone: +1-800-732-8006
Fax: +1-800-732-8093
E-mail: [email protected]
Internet: www.esd-electronics.us
PMC-ETH2 Hardware Manual Rev. 1.0 1
Contents
1. Overview .................................................................... 3
1.1 Description of the PMC-ETH2 Board ........................................... 3
1.2 PCB View with Connector Assignment ......................................... 4
2. Summar
y
of Technical Data .................................................... 5
2.1 General Technical Data ...................................................... 5
2.2 PMC-Interface ............................................................. 5
2.3 ETHERNET Interface ....................................................... 6
2.4 Software Support ........................................................... 6
2.5 Order Information .......................................................... 7
3. Hardware Installation ......................................................... 8
4. Front Panel View with LEDs .................................................. 10
4.1 LEDs in the Front Panel .................................................... 10
5. Connector Assi
g
nment ....................................................... 11
5.1 Assignment of the 64-pin PMC Connector P11 .................................. 11
5.2 Assignment of the 64-pin PMC Connector P12 .................................. 12
5.3 Ethernet 10/100BaseT Connection (X600, X900) ................................ 13
PMC-ETH2 Hardware Manual Rev. 1.02
This page is intentionally left blank.
Overview
PMC-ETH2 Hardware Manual Rev. 1.0 3
10/100BaseT
Transceiver
Port 0
10/100BaseT
RJ45
10/100BaseT
Transceiver
PCI-to-PCI
Bridge
PCI6150
EEPROM
EEPROM EEPROM
IRQ A
IRQ B
Port 1
10/100BaseT
RJ45
Ethernet
Controller
INT21143
Ethernet
Controller
INT21143
PMC Connector
1. Overview
1.1 Descri
p
tion of the PMC-ETH2 Board
Fi
g
ure 1: Block circuit diagram
The PMC-ETH2 is a PMC target board in ‘single’ PCI -Mezzanine Card size.
The PCI-to-PCI bridge enables the board to run at 33 MHz and 66 MHz PCI-bus clock rate.
The two independent Ethernet interfaces are designed for 10 Mbit/s and 100 Mbit/s networks. The full
duplex mode is supported at both speeds. The ports are accessible via RJ45-sockets in the front panel.
The initialization and functional configuration of the PMC-ETH2 module is automatically performed
by software. The module operates with standard Ethernet system drivers of Linux and VxWorks.
The LEDs in the front panel indicate activity, link and data rate.
Overview
PMC-ETH2 Hardware Manual Rev. 1.0
4
P11 P12
X900
Ethernet
Port 1
X600
Ethernet
Port 0
1.2 PCB View with Connector Assi
g
nment
Fi
g
ure 2: PCB view (PCB side turned to the carrier board) with connector position
Technical Data
PMC-ETH2 Hardware Manual Rev. 1.0 5
2. Summar
y
of Technical Data
2.1 General Technical Data
Ambient temperature operating temperature: 0...60 C
storage temperature: -40...+85 C
Humidity max. 90 %, non condensing
Power supply
via PMC bus, required voltages:
5 V 400 mA (typ.)
and
3.3 V 300 mA (typ.)
UL94 Classification
the PCB fulfills at least the limit values of the
UL-Classification UL94V-1 / 105C,
the connector material fulfills at least the UL-Classification UL94V-1.
Connectors
P11 (64-pin PMC connector) - PCI-signals (Pn1/Jn1)
P12 (64-pin PMC connector) - PCI-signals (Pn2/Jn2)
X600 (8-pin RJ45 socket) - Ethernet (Port 0)
X900 (8-pin RJ45 socket) - Ethernet (Port 1)
Dimensions ‘Single’ PCI -Mezzanine Card format
152 mm x 74 mm, length including front panel
Weight approx. 82 g
2.2 PMC-Interface
Standards
PCI-to-PCI bridge: according to PCI Local Bus Specification 2.3
Ethernet controller: according to PCI Local Bus Specification 2.1
PMC: IEEE Std. P1386.1-2001
Interrupts Ethernet Port 0: IRQ A,
Port 1: IRQ B
Clock speed,
Signalling voltage
33 MHz with 3.3 V or 5 V signalling voltage or
66 MHz with 3.3 V signalling voltage
Power supply voltage 3.3 V and 5 V via PCI-Bus
Connectors P11, P12 according to IEEE Std. P1386.1-2001
Technical Data
PMC-ETH2 Hardware Manual Rev. 1.0
6
2.3 ETHERNET Interface
Number 2 ports
Bit rate 10 Mbit/s and 100 Mbit/s, both Full Duplex
automatic speed configuration
Physical interface Twisted Pair (IEEE802.3) 10/100BaseT
Electrical isolation via repeating coil
Connector 8-pin RJ45-socket in the front panel
2.4 Software Support
The module runs with standard Ethernet system drivers of Linux and VxWorks.
Technical Data
PMC-ETH2 Hardware Manual Rev. 1.0 7
2.5 Order Information
Type Properties Order No.
PMC-ETH2 PMC target module with 2x Ethernet on RJ45 V.2086.01
PMC-ETH2-ME User manual in English 1*)
(this manual) V.2086.21
PMC-ETH2-ENG
Engineering manual in English 2*)
Content: circuit diagrams, PCB top overlay drawing, data
sheets of significant components
V.2086.25
1*) If module and manual are ordered together, the manual is free of charge.
2*) This manual is liable to charges, please contact our support.
Tabla de contenidos
