ESA LUMIA BOX Manual de usuario
LUMIA BOX User Manual
Documentation
Connect
Ideas.
Shape
solutions.
Table of contents
Product Introduction .................................................................................................................... 1
Product Overview .................................................................................................................... 1
Product Specification ............................................................................................................... 1
Application Planning ..................................................................................................................... 2
Transportation ......................................................................................................................... 2
Storage..................................................................................................................................... 2
Open and Inspection of Delivered Equipment ......................................................................... 2
Device Connection........................................................................................................................ 3
Precautions before Device Connection.................................................................................... 3
Instruction for Use........................................................................................................................ 4
Product Picture ........................................................................................................................ 4
Product Size Drawing ............................................................................................................... 5
I/O Ports................................................................................................................................... 6
Lower Cover of the PC.............................................................................................................. 7
Status Indicator LED ................................................................................................................. 7
Install the Internal Parts ............................................................................................................... 8
Definition of Pins .......................................................................................................................... 9
Daily Maintenance...................................................................................................................... 10
Troubleshooting Methods for Common Hardware Failure ........................................................ 11
1
Product Introduction
Product Overview
LUMIA BOX is an ultra low power fanless mini PC. It uses Intel® Celeron™ J1900 quad
core processor, support Windows 7/8/10 & Linux OS etc., support 1*MSATA and 1*2.5
inch HDD.
All aluminum fanless design, structure is simple, good dustproof, heat dissipation,
anti-vibration and EMC function, high reliability and strong environmental applicability.
Product Specification
N11
Processor Intel Celeron J1900 Quad Core 1.9 GHz
Graphics Intel HD Graphics, VGA (2048x1536),
HDMI (1920x1080)
Memory
Onboard DDR3L 1600 4G
Network 3*Intel i211-AT Gigabit LAN
Hard Disk 1*2.5 inches SATA HDD
Expansion
2*Mini PCIE
（
WIFI/Bluetooth 3G/4G
）
USB 1*USB3.0, 4*USB2.0
COM
4
（
2*RS232/485
）
Dimension 148 * 125 * 58 mm
Weight 1.2 kg
Power Supply DC 8 ~ 32V
Operating Temp -20℃~ +60℃, surface air flow
2
Application Planning
Transportation
Well packaged products can by any means of transport, to any place, in the long-distance
transportation shall not be installed in the open cabin and carriages, midway
transshipment shall not be stored in open-air warehouse, not allowed to be transported
with inflammable, explosive, corrosive goods together. And products are not allowed to
get wet by rain, snow or liquid substances and mechanical damage.
Storage
The products should be stored in the original packaging box, the storage environment
temperature of the products is 0℃~ 40℃, the relative humidity is 20% ~ 85%. All kinds
of harmful gases, inflammable and explosive products and corrosive chemicals are not
allowed in the warehouse, and there is no strong mechanical vibration, impact and strong
magnetic field effect. The packing case should be placed at least 10cm away from the
ground and at least 50cm away from the wall, heat source, cold source, window or air inlet.
Beware of the risk of damaging the equipment! Extreme temperature variations should be
noted when transporting products in cold weather. In this case, make sure no water
droplets (condensation) form on or inside the device. If condensation forms on the device,
please wait at least 12 hours before connecting the device.
Open and Inspection of Delivered Equipment
Please note the following points when unpacking the equipment:
●It is recommended that you do not discard the original packaging materials. Please
keep the original packaging materials for use in the transportation of equipment again.
●Please store the document in a safe place, for initial debugging of the equipment
need to use it.
●Inspect the delivered equipment to see whether there is any significant damage in
transit.
3
●Verify that the shipment contains the complete equipment and accessories that you
ordered separately. If there is any discrepancy or exist shipping damage, please contact
customer service.
Device Connection
Precautions before Device Connection
Warning
Connected or built-in peripherals shall not be connected to devices of opposite polarity.
Warning
This device can only be operated on the grounding power network. It is forbidden to
operate on the ungrounded or impedance grounded power network.
Warning
The rated voltage of the equipment used must conform to the power supply
characteristics of the product.
Attention
Connect the peripherals that are approved for industrial use. When the machine is
running, it can be connected to hot-plug I/O module (USB). I/O devices without hot-plug
function can only be connected after the power is disconnected.
4
Instruction for Use
Product Picture
5
Product Size Drawing
6
I/O Ports
Front Plate No. Port Name
A : Power switch
B: 4 x USB 2.0
C-D: 2 x COM port
RS232/RS485
E: Power supply
DC 8 ~ 32V
F: LAN
Back Plate
G: DC 12V
H: USB 3.0
I : HDMI
Q-R : 2 x COM
RS32/RS485
L : VGA
M-N : LAN
P : GPIO
O : Audio
7
Lower Cover of the PC
Status Indicator LED
Name Description LED Description
POWER
PC boot up
Not Light Power off
Light Operating
The Lower Cover of the PC
8
Install the Internal Parts
1. Remove four M2.5*35 screws from the bottom plate (see below), remove the
bottom plate，then please install the RAM, WIFI module, MSATA SSD or 2.5” HDD
and other accessories.
2. After finish installing the internal parts, then install the bottom plate，then install
the four M2.5*35 screws.
Tabla de contenidos
Otros manuales de PC industrial de ESA
Manuales populares de PC industrial de otras marcas
Dell
Dell Embedded Box PC 5000 Manual de usuario
IBASE Technology
IBASE Technology ASB200-918 Series Manual de usuario
Lenovo
Lenovo ThinkCentre M90q Manual del propietario
IXXAT
IXXAT Econ 100 Manual de usuario
Kontron
Kontron KBox A-151-TGL Manual de usuario
AXIOMTEK
AXIOMTEK ICO500-518 Series Manual de usuario