-Description:
Continuous longitudinal welder and milling V-guides for timing belts using a milling tool to pull
out fabrics and hot air blower to weld a profile. Fitted with speed, temperature and pressure
controls for different types of material.
-Technical Characteristics:
Dimensions 1995x900x1870 mm (LxWxH)
Weight 538 kg
Max. Belt Width 1250 mm
Max. Belt Thickness 12 mm
Motor milling 1x 750 W
Motor belt 1x 250 W
Leister Welder 1x 1600 W
Voltage 1x230 V 50/60 Hz
Air pressure 6 bar
-Standard equipment:
•One Leister head
•One milling head
•5 V-guides pulleys
•5 Milling tools
•One vacuum system
-Warnings and safety:
−ERM Engineering recommends the users of this machine to fully read this user’s manual
prior to its use to guarantee safe work.
−It also advises and recommends equipment not being used by unqualified staff who have
not received prior training from ERM Engineering
−A copy of this manual delivered along with the machine must always remain at hand during
its use, both for the production operators as well as the maintenance managers.
NOTE: ERM Engineering shall not be held liable under any case for damage caused by
undue or improper use of this equipment.
−Any repairs or modification of the machine performed by personnel not qualified by ERM
Engineering or use of non-original spare parts provided by persons unrelated to the
company, shall give rise to loss of the manufacturer’s guarantee.
