Erisin ES812G Manual de usuario
1.Before Use
How to Read this Manual
Reset Device
2.Basic Operation
Panel Introduction
Remote Controller Operation
Turn the Unit On/Off
Enter into the Main Interface
3.Function Operation
Radio Function Operation
Disc Function Operation
.Play/Eject Disc
.DVD/VCD Disc Playback
.CD Disc Playback
.Touch Menu Function
.MP3/WMA Format Disc Playback
Calendar/Time Setup
AUX1/AUX2 External Input
U Disc/SD Card Function
Operation
Bluetooth Function
Operation
Analog TV Function
Operation
GPS Navigation Function
Operation
Other Function Operations
4.Basic operation of setup menu
Navigation Path Setup
Video Setup
Touch Screen Calibration
Sound Setup
Radio Area Setup
Language Setup
Backlighting
Steering Wheel Setup
5.Additional Information
Troubleshooting
To properly and safely use the product, please read through this instruction
manual carefully, and keep it in a safe place for future reference.
CONTENTS
02
02
03
06
08
08
08
10
10
10
10
11
11
18
18
19
20
20
21
21
22
12
12
13
14
16
17
18
23
Before Use
How to Read This Manual
This manual uses illustrations to explain its operations.
The pictures shown in this manual are for reference only, the actual items are
the standards.
To ensure your safety and the safety of your car and others, please make sure you
follow the basic requirements below:
Warning
Before using the unit, please read all the relative instructions carefully.
Warranty does not apply to any damage caused by noncompliance with the
instruction.
To ensure driving safety and avoid breaking traffic regulation, please do not
watch program or operate the unit while you are driving.
Do not expose the unit to rainwater in case of short circuit.
To prevent a short circuit, never put or left any metallic objects (such as coins
or metal tools) inside the unit.
Please use the unit according to this instruction manual. Do not open the
unit to repair by yourself. If necessary, please go to the professional repair
station for help.
Do not use the car audio for a long time after the engine is turned off,
otherwise the battery shall be used up.
Do not insert any object into the ventilation slot or other openings.
Do not touch, rub or knock the screen with sharp objects.
Reset Device
If the unit or the connected unit fails to operate properly, press the reset hole with
a pointed tool. The unit returns to factory settings after the unit is restarted.
Applying spray cleaner directly to the
Wiping the faceplate with a hard cloth or using a volatile fluid such as thinner
or alcohol may scratch the surface or erase characters.
unit may affect its mechanical parts.
Additional Information
Trouble shooting
You can also perform control to the unit by the steering wheel of the car. Connect the
positive and negative terminal of the car SWC cable with the positive and negative
terminal of the SWC cable of the unit respectively.
Touch [Setup] icon in the main interface.
Enter into setup interface.
Switch page, touch [Steering Wheel Setup] icon.
Enter into steering wheel setup
nterface.
Steering Wheel Setup
Setup method
Click buttons on the steering wheel one by one and keep a record of relevant
sequences. Click appropriate function setup (such as: VOL-) to save the settings.
Basic operation of setup menu Basic Operation
22
Panel Introduction
During use, you can select your familiar
language to display menu by language
setup.
Touch [Setup] icon in the main
interface.
Enter into setup interface.
Switch page, touch [Language Setup]
icon.
Enter into language setup interface.
Language Setup
Setup method
Click appropriate language icon, the
selected language will be displayed as
the menu language.
Via backlight setup interface, you can
manually adjust the display screen
brightness according to the intensity
of light of the environment to achieve
satisfactory effect. At the same time, to
ensure that the driver's sight will not
be affected during night driving and
driving safety, you can also set the time
for display screen to enter into sleeping
status.
Touch [Setup] icon in the main
interface.
Enter into setup interface.
Touch [Backlight] icon.
Enter into backlight setup interface.
Brightness: 4 brightness values are
available: 100%, 75%, 50%, 25%.
Auto close: you can select 15s, 30s,
60s or close.
Backlight
Basic operation of setup menu
Basic Operation
Basic operation of setup menu
Sound Setup
Touch [Sound Setup] icon to enter sound setup interface as is shown below:
Sound effect setup: select general, pop, classic or rock, you can adjust to the best
audio effect according to your preferences.
System volume: adjust volume level of the whole unit
Bluetooth volume: adjust volume level of bluetooth mode
Navigation volume: adjust volume level of navigation mode
Reverse volume: adjust volume level of reverse mode
Screen click sound: select to turn screen click sound on/off. After click sound is
turned off, there is no beep sound when you touch the screen.
Tweeter/woofer/subwoofer: adjust volume level of tweeter/woofer/subwoofer.
Left front speaker attenuate: adjust volume level of left front speaker
Right front speaker attenuate: adjust volume level of right front speaker
Left rear speaker attenuate: adjust volume level of left rear speaker
Right rear speaker attenuate: adjust volume level of right rear speaker
Switch page, touch [Radio] icon.
Enter into the radio area setup
interface.
You need to select your radio area before you use radio function.
Touch [Setup] icon in the main interface.
Enter into setup interface.
Radio Area Setup
Basic Operation
18.RESET
16.MENU
Press this button to back to the main menu in any mode.
17. NAVI
Press the button to enter/exit navigation interface.
19.
20.SD
21.Disc loading slot
22.PIC
1.PWR
Press the button to turn the power
on/off.
2.MUTE
Press the button to turn the volume
output on/off, repress it to resume
previous volume level.
3.NAVI
Press the button to enter/exit the
navigation interface.
4.SOURCE/IR-SW---mode switch
Short press the button to switch the
mode.
Long press the button to switch between
foreground/background controls for the
remote controller.
Remote Controller Operation
Only effective when the background
mode is enabled.
6. SEEK
In playback mode, short press the button
to select the previous/next file; long press
the button to fast forward/backward play.
In radio mode, short press the button to
fine-tune and search station manually;
long press the button to scan station
automatically.
Under analog TV status, short press the
button to fine-tune and search station
manually; long press the button to scan
channel automatically.
7.VOL
Press the button to increase/reduce the
volume.
8.SEL---sound feature
Press the button to select sound feature.
9.LOUD/ ---equal loudness
compensation/hang up
Press the button to turn the LOUD
function on/off.
When the unit supports bluetooth
function, press the button to hang up
a call after the call is completed.
10.BAND/P/N
in radio mode, press the button to
switch the band. Under playback and
TV status, press the button to switch
the system.
11.LOC/RDM
In radio mode, press the button to switch
between local/distant. In playback mode,
press the button to start random play.
12.STOP
Press the button once to pause, press it
twice to completely stop.
13. ---Play/pause
Press the button to switch between play
and pause; under stop status, press the
button to start playback.
5.EQ/ preset equalizer select/answer
Press the button to select different
sound effect mode.
When the unit supports bluetooth
function, press the button can answer
a call.
Basic Operation
If errors occur in touch position, you
can calibrate touch coordinates.
Touch [Setup] icon in the main
interface.
Enter into setup interface.
Switch page, touch [Touch
Calibration] icon.
Enter touch calibration interface.
Perform calibration with a touch pen.
Touch Screen Calibration
Touch method:
Use a touch pen to click the central area
of symbol “+”, calibrate the screen in
the moving sequence of the central area
of “+”. After calibration is completed,
system will automatically save data and
exit the screen.
Basic operation of setup menu
14.ST/PROG---stereo/programmed
playback
In radio mode, press the button to select
stereo or mono station; in playback
status, work with number buttons to
start programmed playback.
15. 0-10+---number button
In radio mode, press number buttons
to select to play pre-stored stations;
long press the number button (1-6) to
store the current frequency in the pre-
stored position.
In playback mode, press number buttons
to directly select songs and chapters.
In analog TV mode, press number
button (1-9) to select station.
16.AMS/RPT
Long press the button to search for
station automatically. In radio mode,
press the button to browse memory
stations; in playback status, press the
button to select repeat to play mode.
17.TITLE
In DVD mode, press the button to
return to the top menu of the disc.
18.AUDIO
In DVD mode, press the button to
switch the dialogue language of the
played program. Under VCD status,
press the button to select L/R channel/
stereo.
19.GOTO---play time setup
Under playback status, after the button
is pressed, work with number buttons
to select track/time play.
20.SUB-T
In DVD mode, press the button to
switch subtitle language.
21.PBC
In VCD mode, press the button to
display all tracks menu of the disc, work
with a number button to select a track.
In DVD mode, press the button to return
to the root menu.
22. Enter
In DVD mode, press the button to move
the cursor up/down/left/right to select
an item in the system setup menu, and
press the ENTER button to confirm the
selected item.
23.SLOW
Under playback status, press the button
to start slow forward playback.
24.ANGLE
In DVD mode, press the button to change
the shooting angle of the played program.
25.SETUP
In playback mode, press the button to
switch among different setup options.
26.OSD
Press the button to display title, chapter,
playing time and remaining time.
27.ZOOM
Under VCD/DVD reading status, press
the button to zoom the image in/out.
28.MENU
Press the button to switch between the
main interface and the current mode.
Battery Change
If the remote controller operates only over shorter distances or does not operate at all, replace
the battery with a new one, and confirm polarities before you change the battery.
One hand press stopper,
then pull out battery. Put battery into battery
holder.
Put the holder into the
remote controller.
Basic Operation
CCD system (back rearview function)
During back, if your rearview mirror
device has been connected, after the car
is put in reverse, system automatically
switches to the rearview mirror function
screen and display the back scene video
shot by your rearview mirror.
Reverse field simulation
Other Functions Operation
Do not rely on CCD system completely,
please make sure your car is safe by your
eyes during driving. Back rearview system
only assists in driving. As the distance
range of rearview system is limited,
completely relying on the rearview system
during driving may cause accidents.
Rearview backup image
Navigation path is already set when
you buy the product. Do not enter into
the navigation setup interface to change
path arbitrarily. Otherwise you may
cause navigation program abnormal.
Warning
Navigation Path Setup
Video setup
You can adjust screen brightness and
contrast etc. by operating button
on the panel. Setup method is follows:
In DVD/AV/TV mode, when the volume
display has not disappeared, press
to switch to video setup function of
brightness and contrast etc. After you
switch to the video parameter you wish
to adjust, rotate the button to adjust its
level.
Function Operation Basic operation of setup
menu
On
When the ignition switch is turned to
the ACC or ON position, press
button on the panel to turn the unit on.
Off
After the unit is started, hold
button for 3 seconds or more to turn
the unit off.
Turn the unit on/off
Enter into the Main Interface
When the unit is turned on, press
button on the panel to switch to the
main interface.
If a function icon listed above
appears grey, it indicates there is no device
get connected to the unit under the current
status, operation is ineffective.
Touch each function icon to enter into
the corresponding function operation.
Touch icon in the main interface
to enter into the radio interface.
Radio Function Operation
After touching icon and entering
into the radio main interface, touch
other function icons to exit the radio
mode.
Enter/exit
Basic Operation Function Operation
Auto search and store station
(1) Touch [AUTO] icon in the radio
interface or press [AMS] button on the
panel to search for station automatically.
During search, the searched stations will
be stored automatically.
(2) During search, retouch [AUTO] icon
or [ AMS] button to stop auto searching.
(3)After stations are searched and stored,
the unit will start browsing each station
for 5 seconds. During browse, when you
find your favorite program and need to
stop browsing, touch any button on the
screen to stop.
Manual search and store station
(1)Touch [Search+/-] button in the radio
interface to search for station manually.
Touch [Search-] button to search for a
station upward; Touch [Search+] button
to search for a station downward.
During search, after a station is searched,
the unit will stop searching automatically
and play the searched station radio.
(2) Directly touch icon in the radio
interface to fine-tune station frequency.
(3) After a station is searched, (such as:
98.00MHZ), long press any position in
the pre-stored station list in the radio
main interface, the searched station will
be stored in the selected position
(such as: ).
Search/store/browse station
Enter/exit
Touch in the main interface to
enter navigation.
Touch [Exit System] icon in the
navigation main interface to exit
navigation system.
Navigation PPT
You can enable DVD/video/radio
function simultaneously during
navigation by navigation push-to-talk
function.
For example:
Press [NAVI] button in navigation
interface to switch to the main interface,
select DVD icon, system will read the
disc and switch to DVD playback
screen while the navigation tone output
continues. Then, press [NAVI] button on
the system operation panel, system
switches to navigation screen, at this
time, DVD playback continues but only
sound output. If you wish to exit DVD
mode, press [NAVI] button to switch to
the main interface, then press icon
to exit DVD mode.
Navigation function operation
The unit supports enquiry function
of destination by touch input and
handwriting input. For detailed
operation of navigation function, see
“Navigation Operation Manual”.
Receiving signal error
When the satellite signals can be
normally received, the error of standard
GPS shall be about 7 meters. Driving
on parallel sections, there shall be
error even the product has auto-correct
function. The normal receiving of
satellite signals shall be affected and
cause error in following environment:
GPS Navigation Function Operation
Receiving of satellite signals
Navigation system can keep receiving
8 satellite signals. As a general rule, the
navigation system can figure out your
accurate location after received 3-4
satellite signals. But some times,
weather and tall buildings in the city
shall affect the signal receiving effect,
as is shown n following figure:
In tune Among tall buildings
At the boulevard The antenna is sheltered
Underground parking Overpass or viaduct
Scope for receiving satellite signals
Angle of
elevation
Angle of
elevation
Function Operation
Tabla de contenidos
Otros manuales de Sistema de vídeo para coche de Erisin
