Ergo Systems 20008D Manual de usuario
MODEL NO.
20008D
Model and serial number may be found
at the rear of the 8 Day Feeder base.
Please record both model and serial
number in a safe place for future use.
Where Purchased :
Date purchased : Month
:Day
: Year
Model No. :
Serial # :
This Owner’s Manual contains
information for all models.
Read and keep this manual for future
reference.
This manual contains important
information on Safety, Assembly,
Operation and Maintenance.
Owner’s Manual
8 Day Autopetfeeder
Ergo Systems Inc. Rev # : 1.1
2
Congratulations on purchasing the “8 DAY AUTOPETFEEDER“.
You will now have more time on your hands and your pet can be
fed on time. Before you can use this appliance you need to
follow some simple steps to assemble the 8 Day Autopetfeeder.
DO NOT RETURN THE PRODUCT TO THE STORE
Call 1-888 ERGOSYS (1-888-374-6797)
If there are missing parts. Check all packing for missing
parts prior to discarding the package.
Before you call us, please have the following
information ready.
1. Details of purchase like invoice number
(found on the bill or invoice)
2. Name and model number of the product
(found on the manual and on the carton.)
3. Actual problem after following the instructions.
4. List of missing parts.
Important: This is an Owner’s Manual for 8 Day Autopetfeeder.
Please do not discard this.
LIMITED WARRANTY
Please read this warranty carefully. Ergo Systems Inc. will warranty this product to be free from manufacturing defects, including
workmanship, when assembled and operated according to operating instructions enclosed with this product, for a period of
ninety (90) days from the date of original purchase. This warranty is non-transferable and applies solely to the original purchaser
and does not extend to subsequent owners of this product. Please register your product at http://www.autopetfeeder.com.
1. Repair service for a period of ninety (90) days from the date of original purchase at no charge for parts and labor with
proof of purchase.
2. Replacement of defective parts for a period of 12 months from the date of original purchase with proof of purchase.
(Labor not included after initial ninety (90) days.)
3. This warranty does not cover cost incurred in the shipping of the product to and from Ergo Systems Inc. for service.
Shipping to Ergo Systems Inc. must be prepaid and insured by UPS or other parcel delivery services.
THIS WARRANTY IS VOID IF THE PRODUCT IS:
1. Damaged due to negligence, abuse, misuse, accident, modification, tampering, alteration, faulty installation and / or acts of God.
2. Used for commercial applications or rentals.
3. Modified or repaired by anyone other than Ergo Systems Inc.
The extent of Ergo Systems Inc. under this limited warranty is the repair or replacement of the product at the sole discretion of Ergo
Systems Inc. In no event shall Ergo Systems Inc.’s liability exceed the purchase price paid by the purchaser. Under no circumstances
shall Ergo Systems Inc. be liable for any loss, direct, indirect, incidental, foreseen, unforeseen, special or consequential damage arising
out of or in connection with the use of this product. This warranty is valid only in the United States of America and Canada.
Reviewing these important safety alert symbols
When you see this Safety Symbol on the following pages, it will alert you
to the possibility of damage to your 8 Day Pet Feeder, if you do not
comply with the corresponding instructions. The hazard may come from
something mechanical or electrical. Read the instructions carefully.
3
List of parts in the 8 Day Autopetfeeder Box Components
1. Base.
2. Bowl Cover.
3. Bowl.
4. Ice Pack
5. Digital timer
6. Bowl Cover Handle
8 Day Feeder Base
1
Bowl Cover
2
Bowl
3
Ice Packs (Quantity 4)
4
Digital timer
5
Bowl Cover Handle
6
Fig 2
4
Assembly
Step 1
Fig 1
Step 2
Fig 3
The 8-Day Autopetfeeder comes as a pre-assembled unit.
Now the digital timer needs to be programmed for the unit to work automatically. Follow the steps below to program the timer.
Remove the sticker from the Bowl Cover Handle. Remove the three screws to remove the Bowl Cover Handle.
Align the bowl to the cover and tighten the screws. Replace
the sticker.
Bowl Cover Alignment
Check to see if the bowl cover aligns with the feed bowl. If the
alignment is correct go to Step 3. If the alignment is off proceed to Step 1.
5
Step 1 Step 2
Fig 5
Remove the Digital Timer from the base by rotating it in
anticlockwise direction.
You will find the Battery compartment at the back of the
Timer Module.
Installing batteries in the Timer Module.
Fig 4
Step 3 Step 4
Fig 7
Open the battery compartment by pushing the plastic tab
to the left and lift up.
Install 3 new AAA batteries in the battery compartment.
Step 5
Close and latch the cover.
Fig 6
Fig 8
NOTE:
Always install new batteries. When you replace the old battery
you must do it within 1 minute or you will loose the programs.
THE TIMER WILL MAKE A BEEPING
SOUND WHEN THE BATTERY IS LOW
6
TIMER PROGRAMMING
This is the Digital Timer unit for 8 Day Autopet Feeder. The timer works on 3 AA batteries. With this
Digital Controller Module you can record your voice which will be played back every meal time.
Records your voice up to 7 Seconds.
NOTE:
- Remove bowl cover to program the timer.
- Press RESET button prior to programming the timer. Use 3 AA Batteries. Do not mix old and new batteries.
1.0 Setting the time mode : 24 hour (military time) or 12 hour AM/PM MODE
Press the HOUR and MINUTE button simultaneously to
activate 12 hour or 24 hour program mode. The display will
begin to flash.
Fig 1
7
Press the HOUR and MINUTE button simultaneously to
activate the setting mode.
Press the PROGRAM button to switch from the present
mode to the next mode
i,e. from 24 hour to AM/PM or AM/PM to 24 hour mode.
Fig 2
Fig 3
1.1 Setting the Current Time
Press the HOUR button to set the HOUR.
Fig 4
8
Press the MINUTE button to set the MINUTE.
Press ON/AUTO/OFF button to go back to clock mode.
Fig 5
Fig 6
NOTE: The seconds setting cannot be altered.
1.2 Understanding the Timer
The autopetfeeder is capable of feeding your pet up to 8 times per day. You can set the time for the feeder up to 8 times
per day. This will give you control over the amount of food you feed your pet and also the time your pet is fed. By pressing
the PROGRAM button you will enter the programming mode. The display will now show 1. At this time the feeder will turn
ON and after the cover rotates 45 degrees, the feeder will turn off.
The pet feeder is capable of feeding both dry and canned food and pet meds.
9
Press ON/AUTO/OFF button to toggle between TEST,
AUTO and OFF mode. The display will show the mode in
which the timer is set
Fig 7
1.3 ON/AUTO/OFF
In TEST mode the bowl cover rotates 45 degree and enters
the next feed compartment.
Fig 8
Now let us understand the different modes of operation in the timer.
In AUTO mode the feeder works as per the programmed
schedule.
Fig 9
10
In OFF mode the feeder does not work.
Fig 10
Press the PROGRAM button to enter into program mode.
The display will show 1 which means that we are setting the
1st schedule.
Fig 11
Press the HOUR button till the display shows 7 AM
Fig 12
1.4 Setting the Program Mode
1.5 Timer Programming Examples:-
Let us set a schedule for 7.10 am.
Otros manuales para 20008D
1
Tabla de contenidos
Otros manuales de Producto para el cuidado de mascotas de Ergo Systems
Manuales populares de Producto para el cuidado de mascotas de otras marcas
ubbink
ubbink KoiFeeder Solar Manual de usuario
ULTRACOM
ULTRACOM KOIRA-GPS Manual de usuario
CADOCA
CADOCA Deuba 106911 Manual de usuario
Dogtra
Dogtra RR Deluxe Manual de usuario
Carson
Carson CONVERTIBLE PET YARD 2200 Manual de usuario
Creative Cedar Designs
Creative Cedar Designs K-9 Kabin Manual de usuario