Erbauer EDLS160 Manual de usuario
EDLS160
EAN: 3663602796930
ORIGINAL INSTRUCTIONS
160W Corner sander_MNL_EDLS160_TPS_GB_V2_BX220IM-10-8-2020
2
Safety instructions 6
Product description 17
Assembly 19
Use 22
Care & maintenance 24
Guarantee 27
Declaration of conformity 28
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 2 6/7/18 10:47 AM
3
1
x1
WARNING! Please read all safety warnings carefully and be
sure that they are fully understood before handling the tool.
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 3 6/7/18 10:47 AM
4
Product description
1
1
2
8
7
56 4 3
92
2a2a
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 4 6/7/18 10:47 AM
5
A
9
4
B
32
C
22a
D
3
E
1.
2.
8
F
3.
2.
1.
6
7
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 5 6/7/18 10:47 AM
6
Safety instructions
GENERAL POWER TOOL SAFETY WARNINGS
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 6 6/7/18 10:47 AM
WARNING Read all safety warnings,
instructions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
7
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 7 6/7/18 10:47 AM
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
NOTE The term “residual current device (RCD)” can be
replaced by the term “ground fault circuit
interrupter (GFCI)” or “earth leakage circuit breaker (ELCB)”.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operat-
ing power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection
used for appropriate conditions will reduce personal injuries.
8
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 8 6/7/18 10:47 AM
c) Prevent unintentional starting. Ensuretheswitch is in
the off-position before connecting to power source and/or
battery pack, picking up or carrying the tool.
Carrying
power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench beforeturning the
power toolon.
A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all
times.
This enables better control of the power tool in unex-
pected situations.
f) Dress properly. Do not wear loose clothingor jewellery.
Keep your hair and clothing away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
g) If devices are providedfor the connection of dust
extraction and collection facilities, ensurethese are con-
nected and properly used.
Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles.
A careless action can cause severe
injury within a fraction of a second.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool
for your application.
The correct power tool will do the job
better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does notturn it
on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c) Disconnect the plugfrom the power source and/or
remove the battery pack, if detachable, from thepower tool
9
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 9 6/7/18 10:47 AM
before making any adjustments, changing accessories, or
storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed.
Use of
the power tool for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free
from oil and grease.
Slippery handles and grasping surfac-
es do not allow for safe handling and control of the
tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will
ensure that the safety of the power tool is maintained.
10
SAFETY WARNINGS FOR SANDER
a) Take special care to protect yourself and people around
against dusts, including the following:
• All persons entering the work area must wear
an appropriate dust mask specially designed for
protection against harmful / toxic dusts, in addition
to using the dust extraction facility and keeping work
area well ventilated.
• Children and pregnant women must not enter the
work area.
• Do not eat, drink or smoke in the work area.
b) Some wood and wood type products especially MDF
(Medium Density Fibreboard) can produce dust that
can be hazardous to your health. We recommend the
use of a dust mask with replaceable lters when using
this product in addition to using the dust extraction
facility.
c) The power tool shall not be wet or applied in wet
environment.
d) The voltage of the power source must agree with the
voltage specied on the rating label of the machine.
e) Check the product, its power cord and plug as well as
accessories for damage before each use. Do not use
the product if it is damaged or shows wear.
f) Double check that the accessories and attachments
are properly xed. One minute testing running in no-
load condition will be helpful to identify any problems.
g) Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
h) Keep the handles dry to ensure safe control. Grip the
product securely so you have full control at all times.
i) Ensure that the air vents are always unobstructed
and clear. Clean them if necessary with a soft brush.
Blocked air vents may lead to overheating and damage
the product.
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 10 6/7/18 10:47 AM
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Lijadora de Erbauer
Erbauer
Erbauer ERB406 Manual de usuario
Erbauer
Erbauer ERB618SDR Manual de usuario
Erbauer
Erbauer ERB401SDR Manual de usuario
Erbauer
Erbauer ERB106SDR Manual de usuario
Erbauer
Erbauer ERB109SDR Manual de usuario
Erbauer
Erbauer ERB415SDR Manual de usuario
Erbauer
Erbauer ERB382SDR Manual de usuario
Erbauer
Erbauer ERB404SDR Manual de usuario
Erbauer
Erbauer ERB105K Manual de usuario
Erbauer
Erbauer ERO18-Li Manual de usuario
