Erbauer EWC1500 Manual de usuario
EWC1500
EAN: 3663602795292
ORIGINAL INSTRUCTIONS
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V2_BX220IM-10-8-2020
2
Safety instructions 7
Product description 21
Assembly 23
Use 26
Care & maintenance 28
Guarantee 32
Declaration of conformity 33
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 2 7/6/18 4:05 PM
3
1
x1
WARNING! Please read all safety warnings carefully and be
sure that they are fully understood before handling the tool.
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 3 7/6/18 4:05 PM
4
Product description
1 2 3
4
5
6
7
8
22
12
11
9
10
17 16 15 14 13
21 20 19 18
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 4 7/6/18 4:05 PM
5
A
3.
1. 7
5
10
2.
B
5
10
7
C D
11
18
15
E F
20 19 18
20 19
13
18
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 5 7/6/18 4:05 PM
6
G5
10
3.
2.
1.
H
7
I J
4 17 16 8
K L
3.
2.
1.
7
1.
2.
2
1
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 6 7/6/18 4:05 PM
7
Safety instructions
GENERAL POWER TOOL SAFETY WARNING
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or
serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodied plugs and matching outlets will reduce risk
of electric shock.
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 7 7/6/18 4:05 PM
8
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energising power tools that have the switch
on invites accidents.
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 8 7/6/18 4:05 PM
9
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g) If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 9 7/6/18 4:05 PM
10
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a hazardous
situation.
5) SERVICE
a) Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTION FOR CUTTING-OFF
OPERATION
CUT-OFF MACHINE SAFETY WARNINGS
a) The guard provided with the tool must be securely
attached to the power tool and positioned for
maximum safety, so the least amount of wheel is
exposed towards the operator. Position yourself
and bystanders away from the plane of the rotating
wheel. The guard helps to protect operator from broken
wheel fragments and accidental contact with wheel.
b) Use only diamond cut-off wheels for your power
tool. Just because an accessory can be attached to
your power tool, it does not assure safe operation.
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 10 7/6/18 4:05 PM
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Herramientas eléctricas de Erbauer
Erbauer
Erbauer ERN647ATL-I Manual de usuario
Erbauer
Erbauer ERB383WCH Manual de usuario
Erbauer
Erbauer ERB380ROU Manual de usuario
Erbauer
Erbauer ERN634ATL Manual de usuario
Erbauer
Erbauer ERB567DRH Manual de usuario
Erbauer
Erbauer ERB125Y Manual de usuario
Erbauer
Erbauer ERB140D Manual de usuario
Erbauer
Erbauer EBR1750 Manual de usuario
Erbauer
Erbauer ERB706SA Manual de usuario
Erbauer
Erbauer ERI065JSW Manual de usuario
Erbauer
Erbauer EMT18-Li-QC Manual de usuario
Erbauer
Erbauer EHTIW18-Li Manual de usuario
Erbauer
Erbauer ERI604IPD Manual de usuario
Erbauer
Erbauer ERB389JSW Manual de usuario
Erbauer
Erbauer EJS750 Manual de usuario
Erbauer
Erbauer EID18-Li Manual de usuario
Erbauer
Erbauer ERB900 Manual de usuario
Erbauer
Erbauer ERB150D Manual de usuario
Erbauer
Erbauer ER2100 Manual de usuario
Erbauer
Erbauer ERB389JSW Manual de usuario
