ERAE Electronics Industry ELM-1700N Series Manual de usuario

●Please observe all safety precautions

when using this product.

●Please read this manual carefully before

using this product.

Items to noteItems to note

모니터의 효과적 사용을 위한

올바른 작업자세

Correct posture for using the LCD monitor

CATION

Eyeheight

Withthemonitor in the cen-

ter,maintain110

。

degrees

vertically and 70

。

Horizontally.

Arm height

Make sure the desk height is right

about where the elbows

are.Maintain an "L" hape with our

arm and maintain the 70

。

~115

。

angle.

Back

Keepyour back

straight.

It is important to keep a nice posture when working w

th a comput-

er.To minimizes fatigue and maintain health,be sure to work in the

following posture.In particular,the LCD monitor must be angled cor-

rectlyin order for it to providea clearpicture.

Thank youfor using Erae Electronics'products.

This product has been thoroughly tested and is reliable and safeto use.

●

Please readthe safety precautionsbefore

sing the product.

●

Dependingon the particular model purchasedby the user, the content of this manual may

not match completely.

●Erae do

s not take any resp

nsibility for damages to the product caused bythe use of

non-standard parts or by not following the precautions mentioned inthismanual.

●This product has been optimized for Windows 2000Professional, Windows XP Home

Edition, andWindows XPProfessional. Use of the product with any other OS requires a

separate softwareand the user mustpurchase this sof

ware or payfor an upgrade.

·Windows XP and Windows 2000 are the registered trademarks of Microsoft Corporation. Other

trademarks are the registered trademarks of each respectable company.

●This product is not a computer,but an independent device th

t simulated

Windows.Unlike com

uters,this product does not support other peripheral devices or

connection with communication e

uipment,and it does

ot support high quality videos

3D games.

●If this product will

e used to allow one computer to be shared among

ultiple people,

appro

riate configurations should be set in Windows OS for security purposes. NTFS

method of file service and the user account configurations must be set in administrator

mode in order to maintain security and enable ongoing system maintenance.For more

information, refer to guideline on Windows OS.

Erae Electronics does not guarantee the accuracy of this manual.

Erae Electronics does not approve of the sale for the use of this product for purposes other than

what was originally intended and does not take any legal responsibility for any direct or indirect

damages caused by the saleanduse of this productin a manner not originally intended.

This device has been approved for use in h

useholds and maybe used saf

a residence or other areas.

This manual is copyrighted by Erae Electronics.

This manual may not be duplicated or copied in whole, or in part, without the

explicit, prior approval from Erae Electroncis.

Content

Installing and uninstalling application program

Checking content

Content

Checking content

··························································································

Installing application program·····································································

20-22

Uninstalling application program··································································

23-24

네트워크 환경 설정

Network configurations

Using the application program

Registering and upgrading NCT-2000-XP online

Using IP sharing device

(support switch for more than 100M,supports DHCP function)································

25-28

Using HUB(supports switching for more than 100M)···········································

28-29

Directly connecting PC and NEOTUS ··························································

30-31

Using NCT-2000-XP application program·······················································

32-33

View information for each station ·······································································

Description of information /settings functions····················································

35-36

Description of general functions·········································································

All UTMA Computers ····················································································

Registering NCT -2000 -XP online······································································

References ·························································································

38-40

Upgrading NCT-2000-XP online ········································································

electing and adjusting OSD screen

Adjusting monitor screen ················································································

Adjusting screen/colors/menu/options···························································

43-46

Other

Recommendations ·······················································································

Affectof settins····························································································

Self test function··························································································

FAQ··································································································

49-52

Warnings ··································································································

Productstandards··················································································

53-54

Table of supported modes···············································································

Power save function······················································································

Safety precautions

Safety precautions······················································································

7-9

Product introduction and connecting the peripheral devices

Product introduction

·····················································································

Product features

·························································································

Concept diagram

························································································

Connectingto thePC

····················································································

Names and descriptions

(when Digital RGB input device is not available)

·································

Connectingperipheral devices

(whenDigital RGBinputdevice is not available)

··························

Names and descriptions

(when Digital RGBinput device is available)

·····································

Connectingperipheral devices

(whenDigital RGBinputdevice is available)

·····························

Installing monitor driver

Automatic installation···············································································

When installation not work (Window 95/98/ME)·················································

When installation not work (Window 2000) ······················································

When installation not work(Window XP) ·························································

Safety precautions

Checking contents

When directly connecting the PC and NEOTUS,be sure to crossover cable or crossover adapter to connect

to both side's direct LAN cable.

When connecting directly to the PC,without using a switch hub,additional LAN card may be required and in

this case,connectdirect with crossover cable use conversionadapter indirect LAN cable to connect.

To share the Internet,go to <Control Panel>, "Network connections wizard ”,"Internet connections wizard" and

configurethe homenetwork.

Check to makesure the product package containall parts andcontact dealerif anything is missing.

Contact the dealerif you ’d like to purchase optional parts.

Theactual parts in thepackage maylook slightly differentfrom thepicturesbelow.

Thecontentof thepackage may be differentdepending on the model purchased.

References

Checking content

Power cord

Adapter

Userguide

Crossover adapter(optional)

Direct LAN (CAT5 LAN) Cable

DVI-D cable

DVI-D cable monitor driver

And NEOTUS

application program

InstallationCD

RGB cable

This section provides guidelines for user's safety and preventing damage to the product.Be sure to read this carefully.

If these safety precautions are ignored,it can lead to seriousinjury or evenfatalityand may also leadto prop-

ertydamage.

Warning

: indicatesconditionsthat can causeserious injury or fatality.

Cation :

indicates conditions that can cause light injury or product damage.

Precautionary items are marked as "Warning" or "Caution".

Do not use damaged power cords or

loose outlets.

There may be a risk of electric shock

or fire.

Do not unplug by pulling on the cord

or using wet hands.

There may be a risk of electric shock

or fire.

Be sure to plug into an outlet that has

beengrounded.

There may be a risk of electric shock.

Plug in the power cord securely so

that it does not move.

Improperly plugged in powercord

may cause a fire.

Do not severely bend the power

cord or place heavy items on top of

it.

There may be a risk of electric

shock or fire.

Do not plug in multiple power cords

to a single outlet using extension

cords.

There may be a risk of fire.

When installing the monitor,leave some space between

the wallandthemonitorforventilation.

Ifthe temperature of the monitor becomes very high,it

may cause a fire.

Make sure no table cloth,curtains or other flammable

materials cover the ventilation outlet.

If the temperature of the monitor becomes very high,it

may cause a fire.

CATION CATION

CATION

CATIONCATIONCATION

CATION

Safety precautions

Set the PC so that it converts to DPMS mode when

themonitor is not used for a while.

Use a screensaverthat has motions.

Donotplace the productface down.

TFT-LCD surface may be damaged.

If you smell smoke or if the monitor begins to

smoke,immediately turn off the power and contact

ourservicecenter.

There may be a risk of electric shock or fire.

When cleaning the monitor,be sure tounplug it.

There may be a risk of electric shock or fire.

Do not place candles or lit cigarettes on tope of the

monitor or near the ventilationoutlet.

There may be a risk of fire.

Do not install in bookcases or closets where ventilation

is poor.

There may be a risk of fire.

Configure the PC to matchthe product'sresolution andfrequency.

Failure to doso may strain the eye and cause poor eye sight.

17", 19" - 1280 x 1024 @ 60Hz

Place the monitor on a flat surface,in a safe area,and place the monitor gently on the surface.

If the product short circuits,it may cause product damage or injury.

Do not insert picks,tools,or other

metal piecesinto the ventilation outlet

orA/Vunit.

There may be a risk of electric shock

orfire.

Do not allow children to hold onto

or climb ontop ofthe monitor.

They may be injured when the

monitorfalls.

Do notdisassemble,repair or modify

themonitoron your own.

This may cause electric shock or

fire.If the monitor requires a

repair,please contact our service cen-

ter.

Unplug the monitorwhen it will not beused for a long

time.

Too much dust can cause excessive heat,start a fire

orcausesmoking.

If you smell smoke or if the monitor begins to

smoke,immediately turn off the power and contact our

service center.

There may be a risk ofelectric shock or fire.

When cleaning the monitor,be sure tounplug it.

There may be a risk of electric shock or fire.

Clean dust and wipe wateraway from power plug pins

and thesurrounding area.

Do not use commercial

ax,benzenes,alchohol,paint

thinner,soaps andother chemical substances on the

monitors and do notclean the monitor with wet cloth.

Clean dust and wipe water away frompower plug pins

and the surrounding area.

There may be a risk ofelectric shock or fire.

Do not install in areas where it can be exposed to

water(raing),oil,ormoisture.

There may be a risk of electric shock,fire orproduct

damage.

CATION

CATIONCATION

Warning

CATION CATION

CATION

CATIONCATION

Warning

Product introduction and connecting the peripheral devices

"NEOTUS"is a combination of LCD monitor and "WoIP:Windows over IP" technology that allows

up to 10 NEOTUS to be connected to a single computer to enable up to 10 people to share the single computer.In

addition,the user may use NEOTUS as a normal monitorby connect

ng themonitor directly toa PC.

Product introduction

Provides sophisticated design,simple installa-

tionand ease ofuse. ●A new concept product that combines monitor with network functions.

●May be used only as a monitor.

●Uses standard TCP/IP based Ethernet.

●Provides high scalability and data security.

●Uses WoIP (Window over IP)protocol.

●Requires low power and does not produce noise.

Product Features

●Windows XPHome/Professional

●Windows 2000Professional

●When using 1 unit: Intel Pentium 4 1.0GHz,main memory of 256MB o

●When using 2-3 units : HTtechnologybasedIntel Pentium 4 2.4GHz,main memory of 512MB

or more

●When using 4-7 units : HTtechnologybasedIntel Pentium 4 3.0GHz,main memory of 1024MB

or more

●When using 8-10 units : HT technology based Intel Pentium 4 3.2GHz,main memory of 2048MB

ormore

Product introduction

Product introduction and connecting the peripheral devices

References

Recommended

specifications

(

)

R R

Connecting to the PC

●Connecting directly to PC

●Connect to PCand hub (orrouter) HUB

HUB

When multiple units areusedsimultaneously,thePC musthave sufficientperformance capacity and the user may experi-

ence different levels of speed or compatibility depending on the application program being used.Refer to the technical

overview sectionon thewebsite.

Product introduction and connecting the peripheral devices

Names and descriptions

(when

igitalRGB input device is not available)

Product introduction and connecting the peripheral devices

Power outlet

Analog RGB outlet

Speaker connectionoutlet

Keyboard connection outlet

Mouse connection outlet

LAN connection outlet

-

Turns power on/off.

SOURCE -

press the button tochange the input signal.

(Analog Network Analog)

MENU -

Opens OSD menu.

SELECT -

select a menu item.When the button is pressed while /OSD isoff,automaticadjustment will be made.

◀

▶ -

Navigate OSD menu or adjustsettings.



LED

Front

Rear

Names and descriptions

(whenDigitalRGB input deviceis not available)

PS/2Jack

3.5ΦStereo Jack

S/2 Jack RJ45 Jack

Power AnalogRGB

Speaker

Connect

POWER

Keyboard

Mouse LAN

Keyboard Mouse LAN

SOURCE MENU SELECT

Product introduction and connecting the peripheral devices

Names and descriptions

(when DigitalRGB input deviceis available)

Product introduction and connecting the peripheral devices

PS/2Jack

3.5ΦStereo Jack PS/2 Jack RJ45 Jack

Names and descriptions

(whenDigitalRGB input device is available)

Rear

Front

Power outlet

Digital RGB input outlet

Analog RGB input outlet

Speaker connection outlet

Keyboard connection outlet

Mouse connection outlet

LAN connection outlet

-

Turns power on/off.

SOURCE -

press the buttonto change the input signal.

(Analog Digital Network Analog)

MENU -

Opens OSD menu.

SELECT-

select a menu item.When the button is pressed while /OSD isoff,automatic adjustment will be made.

◀

▶ -

Navigate OSD menu or adjust settings.



LED

SOURCE MENU SELECT

Power AnalogRGBDigital RGB

Speaker

Connect

POWER

Keyboard

Mouse LAN

Keyboard Mouse LAN

Installing monitor driver

When install

tion does not work

(Window 95/98/ME)

Installing monitor driver

If the driver program is damaged,download it from the following website.

·Internet : http://www.erae.com/→Customer Service →User guide and documents

·Internet : http://www.neotus.co.kr

1.InserttheCDpackagedwithNEOTUSintheCD-ROM.

2.InWindows95orlaterversionsofOS,themonitorisautomaticallydetectedasshown bytheplug&playfunction.

(Connectingto Analog RGBorDVI)

3.Completetheinstallationasfollows.

·If the monitor driver is installed,resolution and frequency will be set at optimalsettins for clearer picture.

"Search for an appropriatedriver"

Click "Next"

→ →

→

AutomaticInstallation

1.Insert the CDpackaged withNEOTUSin the CD-ROM.

2.Doubleclick on Monitor Driver/Install.exe file in the CD and follow the below steps.

Click "OK"

Click "YES" Click "Yes"

→

→ →

Monitor installation is complete.

Click "Finish"

Installing monitor driver

When installati

n does not work

(Windows2000)

Installing monitor driver

1. Insert the CD packaged with NEOTUS in theCD-ROM.

2. Double click on Monitor Driver/Install.exefilein the CD and follow the below steps.

Monitor installation is complete.

When installation does

otwork

(Windows XP)

연

결

및

설

치

1. Insert theCD packaged with NEOTUS in the CD-ROM.

2. Double click on Monitor Driver/Install.exe file inthe CD and follow the below steps.

Monitor installation is complete.

Click"OK"

Click "OK"

→

Click "OK"

→

Click "OK"

→

→ →

Click "Yes" Click "Yes"

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de ERAE Electronics Industry

ERAE Electronics Industry

ERAE Electronics Industry EPT-4200AP Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación