Equinox Systems Blitzer Strobe Manual de usuario

Order code: EQLED366

Blitzer Strobe

User Manual

www.prolight.co.uk Blitzer Strobe User Manual 2

Safety advice

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL

CAREFULLY BEFORE YOUR INITIAL START-UP!

• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary

fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance

of this manual or any unauthorised modication to the equipment.

OPERATING DETERMINATIONS

Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand

thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!

KEEP THIS EQUIPMENT

AWAY FROM RAIN,

MOISTURE AND LIQUIDS

CAUTION!

TAKE CARE USING

THIS EQUIPMENT!

HIGH VOLTAGE-RISK

OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithother

cables.Handlethepowercableandallmainsvoltage

connectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,

asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhen

equipmentisnotinuseorbeforecleaning!Onlyhandle

thepower-cablebytheplug.Neverpullouttheplugby

pullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageis

between100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedor

damaged.Checktheequipmentandthepowercable

periodically.

• Iftheequipmentisdroppedordamaged,disconnectthe

mainspowersupplyimmediatelyandhaveaqualied

engineerinspecttheequipmentbeforeoperatingagain.



• Iftheequipmenthasbeenexposedtodrastic

temperatureuctuation(e.g.aftertransportation),

donotconnectpowerorswitchitonimmediately.

Thearisingcondensationmightdamagetheequipment.

Leavetheequipmentswitchedoffuntilithasreached

roomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuse

immediately.Packtheunitsecurely(preferablyinthe

originalpackingmaterial),andreturnittoyourProLight

dealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybe

carriedoutbyaqualiedtechnician.THISUNITCONTAINS

NOUSERSERVICEABLEPARTS.

• Thislightingxtureisforprofessionaluseonly-itis

notdesignedfororsuitableforhouseholduse.The

productmustbeinstalledbyaqualiedtechnicianin

accordancewithlocalterritoryregulations.Thesafetyof

theinstallationistheresponsibilityoftheinstaller.The

xturepresentsrisksofsevereinjuryordeathduetore

hazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingto

EN62471.Donotviewthelightoutputwithoptical

instrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk Blitzer Strobe User Manual 3

Product overview & technical specications

TheBlitzersarecompactall-in-onestrobe,blinderandwashlights,equippedwith132SMDLEDsandan80°

beamangleallenclosedinarobustmetalhousingwithmountingbracket.TheDMXmodesfeaturecontrolover

dimmer,ashspeedandduration.Master/slave,soundactiveandstandalonemodesalsoaddtothemultitude

offeatures.

• 132white5050SMDLEDs(6500K)

• Beamangle:80°

• DMXchannels:1/2/3-1or3-2selectable

• Auto,soundactiveandmaster/slave

modes

• 0-100%dimmingandvariablestrobe

• Suppliedwithhangingbracket

• 4pushbuttonmenuwithLEDdisplay

• IECpowerinput

• 3-PinXLRinput/output

• Convectioncooled

Blitzer Strobe

Specications

Powerconsumption 30W

Powersupply 100~240V,50/60Hz

Fuse F2A250V

Dimensions 120x345x75mm

Weight 1.35kg

Ordercodes EQLED366

120mm

345mm 75mm

www.prolight.co.uk Blitzer Strobe User Manual 4

Technical specications

DMX INPUTMIC DMX OUTPUT

POWER INPUT:

100-240V~50/60Hz

FUSE: F2A 250V

POWER CONSUMPTION: 30W

MENU DOWNUP ENTER

BLITZER

www.prolight.co.uk

11 04

07 08 03 02 05 06

090110

01-Earthpoint

02-LEDdisplay

03-Functionbuttons

04-Microphone

05-DMXinputsocket

06-DMXoutputsocket

07-IECpowerinputsocket

08-FuseF2A250V

09-Hangingbracket

10-Hangingbracket

adjustmentknob

11-Safetyeye

Inthebox:1 x xture,

1 x power cable,

& 1 x user manual

www.prolight.co.uk Blitzer Strobe User Manual 5

Operating instructionsOperating instructions

A 0 0 1

A 5 1 2

A 0 0 1

DMX address setting

A U 0 0

A U 9 9

A U 7 O

Auto mode

S L A U

Slave mode

S 0 0 0

S 0 9 9

S O U N

Sound active

C 1 0 0

C 1 9 9

C F 0 0

C F 9 9

C 0 0 0

Strobe mode

F A 0 0

F A 9 9

F F 0 0

F F 9 9

F A 0 0

Fade mode

1Ch

2Ch

3 C h 1

3 C h 2

C h

DMX channel setting

www.prolight.co.uk Blitzer Strobe User Manual 6

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes

tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitof

thextureandeachxtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttononthefrontoftheunittoshowA001

ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe

requiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting. Toexitoutofanyoftheabove

options,pressthe“MENU”button.

DMX channel mode:

ToaccesstheDMXchannelmode,pressthe“MENU”buttononthefrontoftheunittoshowChonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseoneofthe

1/2/3-1or3-2DMXchannelmodes.Pressthe“ENTER”buttontoconrmthesetting.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.



Operating instructions

PLEASE NOTE:WhentheunitisreceivingDMXtherstreddotonthedisplaywillash.

2 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-250 Strobe(slow-fast)

251-255 Nofunction

3 channel mode 1:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-250 Strobe(slow-fast)

251-255 Nofunction

CH3 000-255 Flashduration(slow-fast)

3 channel mode 2:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2

000-005 Nofunction

006-010 Blackout

011-033 Strobepulse(slow-fast)

034-056 Stroberampup(slow-fast)

057-079 Stroberampdown(slow-fast)

080-102 Stroberandom(slow-fast)

103-127 Strobe(shortash)

128-250 Strobe(slow-fast)

251-255 Nofunction

CH3 000-005 SoundactiveOFF

006-255 SoundactiveON(senslow-high)

1 channel mode:

Channel Value Function

CH1 000-010 Nofunction

011-255 Strobe(slow-fast)

www.prolight.co.uk Blitzer Strobe User Manual 7

Operating instructions

Master/slave mode:

Tosetthemasterunit,selectyourdesiredprogram(soundactive,auto,strobeorfademodes).

Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLAU

ontheLEDdisplay.Pressthe“ENTER”buttontoconrmthesetting.Theunitwillnowruninsequence

withthemasterunit.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Strobe mode:

Toaccessthestrobemode,pressthe“MENU”buttononthefrontoftheunittoshowC000onthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseC1.00.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthebrightnessbetween

00~99.Value: 00 - 99 (00 = low, 99 = high). Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochooseCF.00.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

toselectthestrobespeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fade mode:

Toaccessthefademode,pressthe“MENU”buttononthefrontoftheunittoshowFA00ontheLED

display.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseFA.00.

Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthefadespeedbetween

00~99.Value: 00 - 99 (00 = slow, 99 = fast). Nowpressthe“ENTER”buttonandusethe“UP”and

“DOWN”buttonstochooseFF.00.Pressthe“ENTER”buttonandusethe“UP”and“DOWN”buttons

toselectthestrobespeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Auto mode:

Toaccesstheautomode,pressthe“MENU”buttononthefrontoftheunittoshowAUTOonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselecttheauto

programspeedbetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = slow, 99 = fast). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound/sound sensitivity:

Toaccessthesoundmode,pressthe“MENU”buttononthefrontoftheunittoshowSOUNonthe

LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstoselectthesound

sensitivitybetween00~99.Pressthe“ENTER”buttontoconrmthesetting. 

Value: 00 - 99 (00 = low, 99 = high). Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Blitzer Strobe User Manual 8

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”

from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel

indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas

addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105

and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe

chainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent

xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.

DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”

XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether

andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.

ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest

cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe

DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein

aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda

DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,

nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.

YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,

seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbe

purchasedfromallgoodsound

andlightingsuppliersor

ProLightConceptsdealers.

Pleasequote:

CABL10 – 2m

CABL11 – 5m

CABL12 – 10m

www.prolight.co.uk Blitzer Strobe User Manual 9

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables

shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs

outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,

youmayneedtouseaterminatoron

thelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease

the possibilities of erratic behaviour.

(3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures

maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa

3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmission

problemsandinterference.itisalways

advisabletoconnectaDMXterminal,

(resistance120Ohm1/4W)betweenpin2

(DMX-)andpin3(DMX+)ofthelastxture.

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

3-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

5-pin XLR (socket)

Pin 1: GND (screen)

Pin 2: Signal (-)

Pin 3: Signal (+)

Pin 4: N/C

Pin 5: N/C

DMX setup

www.prolight.co.uk Blitzer Strobe User Manual 10

WEEE notice

Correct Disposal of this Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries

with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof

withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe

environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother

typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir

localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally

saferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe

purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de DJ de Equinox Systems

Equinox Systems

Equinox Systems Butterfly Quad Manual de usuario

Equinox Systems

Equinox Systems Stratos Duo RGB Manual de usuario

Equinox Systems

Equinox Systems Pulse Tube Lithium Manual de usuario

Equinox Systems

Equinox Systems Crossfire XP Manual de usuario

Equinox Systems

Equinox Systems Hallucination Manual de usuario

Equinox Systems

Equinox Systems BLITZER Manual de usuario

Equinox Systems

Equinox Systems Avalanche EQLED358 Manual de usuario

Equinox Systems

Equinox Systems EQLED12N Manual de usuario

Equinox Systems

Equinox Systems PRO DJ Booth Quad-colour Starcloth Manual de usuario

Equinox Systems

Equinox Systems 2M Flight CasedDMX LED Flame Machine Manual de usuario

Equinox Systems

Equinox Systems MoonPar Manual de usuario

Equinox Systems

Equinox Systems Hot Rod EQLED089 Manual de usuario

Equinox Systems

Equinox Systems Colour Raider Uplighter Pack Manual de usuario

Equinox Systems

Equinox Systems EQLED064 Manual de usuario

Equinox Systems

Equinox Systems EQLED12B Manual de usuario

Equinox Systems

Equinox Systems SpectraPix Batten EQLED055 Manual de usuario

Equinox Systems

Equinox Systems EQLED003 Manual de usuario

Equinox Systems

Equinox Systems Fusion 200 Zoom Spot Manual de usuario

Equinox Systems

Equinox Systems Fusion Orbit Manual de usuario

Equinox Systems

Equinox Systems Blitzer RGB Strobe Manual de usuario

Equinox Systems

Equinox Systems Six Shooter MKII Manual de usuario

Equinox Systems

Equinox Systems MicroPar UV EQLED028 Manual de usuario

Equinox Systems

Equinox Systems EQLED138 Manual de usuario

Equinox Systems

Equinox Systems Helix Scan XP 150W Scanner Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario