❺Pair sensor with your device
Use the dongle for a wireless
connection without pairing
5
Tips
❶Press and hold the Bluetooth
button (1) until you hear the
beep sound.
❷Turn on Bluetooth for the
device you are pairing
(phone, tablet, computer)
and select “EquilSM-xxxxxx”
in the devices list.
❸ When pairing is complete,
the Bluetooth LED will start
to blink slowly (approx. once
every 2 seconds).
Note: When Equil Note
is open, Bluetooth LED
will stay solid.
For more detailed pairing info
for your specific device, refer
to the tutorial in Equil Note.
To pair with a new device
when a previously-paired
device is nearby, you may
need to delete/remove
“EquilSM-XXXXXX” from the
list of devices paired on the
other device.
Pairing
❻
Make sure your Bluetooth status is on.
The sensor will connect to the dongle automatically.
Connect the USB wireless dongle to your Windows
or Mac computer.
Dongle Ease of Use
The dongle is useful when
a Bluetooth device or
connection is not available.
The dongle does not
require any pairing and
will connect with the
sensor automatically.
Works only with Windows
and Mac Computers.
