EQuality 506DN Manual de usuario

Cat. No. 1557

Date 01/09 Part No. 39184B101

Revision 0

eQuality™ 506DN

Vital Signs Monitor

Service Manual

Page ii eQuality™ 506DN Service Manual Criticare Systems, Inc.

CRITICARE SYSTEMS, INC. (Criticare) owns all rights to this unpublished work

and intends to maintain this work as confidential. Criticare may also seek to

maintain this work as an unpublished copyright. This publication is to be used solely for

the purposes of reference, operation, maintenance, or repair of Criticare equipment.

No part of this publication may be reproduced in any manner or disseminated for

other purposes.

In the event of inadvertent or deliberate publication, Criticare intends to enforce its

rights to this work under copyright laws as a published work. Those having access

to this work may not copy, use, or disclose the information in this work unless

expressly authorized by Criticare to do so.

All product specifications, as well as information contained in this publication, are

subject to change without notice.

All information contained in this publication is believed to be correct. Criticare

Systems, Inc., shall not be liable for errors contained herein nor for incidental or

consequential damages in connection with the furnishing, performance, or use of

this material.

This publication may refer to information and products protected by copyrights

or patents and does not convey any license under the patent rights of Criticare

Systems, Inc., nor the rights of others. Criticare Systems, Inc., does not

assume any liability arising out of any infringements of patents or other rights

of third parties.

PROPERTY OF CRITICARE SYSTEMS, INC.

eQuality™ Vital Signs Monitor, DOX™ Digital Oximetry, ComfortCuff™ NIBP and

Multi-Site™ SpO2Sensors are trademarks of Criticare Systems, Inc.

Criticare Systems, Inc. eQuality™ 506DN Service Manual Page iii

Contents

Copyright................................................................................................................ii

Contents................................................................................................................iii

Warranty...............................................................................................................vii

Service Return Policy.......................................................................................... viii

EC Declaration of Conformity................................................................................ix

Section 1 – Introduction

Description .................................................................................................................... 1-1

Intended Use................................................................................................................. 1-1

Non-Invasive Blood Pressure (NIBP)............................................................................ 1-2

ComfortCuff® Technology ................................................................................. 1-2

Description of NIBP Measurement..................................................................... 1-2

NIBP Clinical Testing and Accuracy................................................................... 1-3

Cuff Inflation and Pressure Protection ............................................................... 1-3

Heart Rate..................................................................................................................... 1-4

DOX™ Pulse Oximetry Measurement (SpO2) .............................................................. 1-5

Definition ............................................................................................................ 1-5

DOX™ Digital Oximetry ..................................................................................... 1-5

Method ............................................................................................................... 1-5

SpO2Clinical Testing and Accuracy .................................................................. 1-6

Specifications................................................................................................................ 1-7

Symbols ...................................................................................................................... 1-10

Safety..........................................................................................................................1-12

Software Error Related Hazard Mediation ....................................................... 1-14

Potential Interference ....................................................................................... 1-14

Leakage Current .............................................................................................. 1-14

Voltage Fluctuations......................................................................................... 1-15

Equipotential Ground ....................................................................................... 1-15

Defibrillation, HF, and Electronic Device Protection......................................... 1-15

Biocompatibility ................................................................................................ 1-15

Latex Content................................................................................................... 1-15

DEHP Content.................................................................................................. 1-15

Section 2 – Service Menus

Introduction ................................................................................................................... 2-1

Service Mode ................................................................................................................ 2-1

Service Mode Window ....................................................................................... 2-1

Service Menus .............................................................................................................. 2-2

Revisions Menu.................................................................................................. 2-2

Test Menu .......................................................................................................... 2-3

Default Setups.................................................................................................... 2-4

Board Setups ..................................................................................................... 2-5

NIBP Calibration Menu ................................................................................................. 2-6

Setting User Defaults .................................................................................................... 2-7

Setting User Defaults ......................................................................................... 2-7

Power Up in Service Mode................................................................................. 2-7

Page iv eQuality™ 506DN Service Manual Criticare Systems, Inc.

Contents

Factory Defaults ............................................................................................................2-9

Main Menu..........................................................................................................2-9

Alarm Menu ........................................................................................................2-9

Configuration Menu ..........................................................................................2-10

Communication Menu.......................................................................................2-10

Patient Data Menu............................................................................................2-11

NIBP Cycle Menu ............................................................................................. 2-11

Main Menu...................................................................................................................2-12

Patient Size ...................................................................................................... 2-12

Alarm Volume ................................................................................................... 2-12

Pulse Volume ................................................................................................... 2-12

Enable MAP......................................................................................................2-12

Alarm Menu .................................................................................................................2-13

High Pulse ........................................................................................................2-13

Low Pulse ......................................................................................................... 2-13

High SpO2........................................................................................................2-13

Low SpO2.........................................................................................................2-13

High Systolic.....................................................................................................2-14

Low Systolic......................................................................................................2-14

High Diastolic....................................................................................................2-14

Low Diastolic ....................................................................................................2-14

High MAP .........................................................................................................2-14

Low MAP ..........................................................................................................2-14

Configuration Menu ..................................................................................................... 2-15

Time..................................................................................................................2-15

Hour..................................................................................................................2-15

Minute...............................................................................................................2-15

Day ...................................................................................................................2-15

Month................................................................................................................2-15

Year..................................................................................................................2-15

Contrast ............................................................................................................ 2-15

Brightness.........................................................................................................2-15

Reverse Video .................................................................................................. 2-15

NIBP .................................................................................................................2-15

SpO2.................................................................................................................2-15

Units .................................................................................................................2-15

Language..........................................................................................................2-15

Communication Menu .................................................................................................2-16

On NIBP ...........................................................................................................2-16

On Alarm .......................................................................................................... 2-16

Interval..............................................................................................................2-16

Patient Data......................................................................................................2-16

Print To ............................................................................................................. 2-16

Serial ................................................................................................................2-16

Baud Rate.........................................................................................................2-16

Patient Data.................................................................................................................2-17

Weight ..............................................................................................................2-17

Height ...............................................................................................................2-17

Respiration .......................................................................................................2-17

Pain ..................................................................................................................2-17

Section 3 – Theory of Operation

System Architecture ......................................................................................................3-1

Module Architecture ......................................................................................................3-2

Main Board .........................................................................................................3-2

NIBP Module ......................................................................................................3-2

DOX SpO2Module .............................................................................................3-2

Block Diagram ...............................................................................................................3-3

Criticare Systems, Inc. eQuality™ 506DN Service Manual Page v

Contents

Section 4 – Cleaning and Disinfecting

Cleaning and Disinfecting ............................................................................................. 4-1

Pulse Oximeter Sensors .................................................................................... 4-1

Blood Pressure Cuffs ......................................................................................... 4-2

Accidental Wetting ........................................................................................................ 4-3

Section 5 – Preventative Maintenance

Incoming Inspection ...................................................................................................... 5-1

Maintenance Schedule ................................................................................................. 5-1

Long-Term Storage....................................................................................................... 5-1

Disposal ........................................................................................................................5-1

Service Checks ............................................................................................................. 5-2

Calibration.....................................................................................................................5-2

Serviceable Components.............................................................................................. 5-3

Battery Removal/Replacement .......................................................................... 5-3

Fuse Removal/Replacement.............................................................................. 5-5

Annual Testing .............................................................................................................. 5-6

Accessory Testing.............................................................................................. 5-6

Functional and Safety Testing............................................................................ 5-6

Equipment and Tools ......................................................................................... 5-7

Test Fixtures ...................................................................................................... 5-8

Electrical Safety Tests ................................................................................................ 5-10

Withstanding Voltage Test (Hi-pot) .................................................................. 5-10

Equipment Needed .......................................................................................... 5-10

Setup Hi-pot Tester .......................................................................................... 5-10

Hi-pot Performance Test .................................................................................. 5-11

Leakage Testing............................................................................................... 5-11

Setup Procedure (Self-Test) ............................................................................ 5-11

Leakage Procedure.......................................................................................... 5-12

Functional Tests.......................................................................................................... 5-14

System Check .................................................................................................. 5-14

Speaker Performance, Alarms Verification ...................................................... 5-15

Power Supply Performance ............................................................................. 5-15

Monitoring Module Verification.................................................................................... 5-16

NIBP Verification .............................................................................................. 5-16

NIBP Seal Test................................................................................................. 5-17

SpO2Verfication .............................................................................................. 5-18

Functional and Safety Testing Checklist..................................................................... 5-19

Section 6 – Service Testing & Calibration

Monitor Testing ............................................................................................................. 6-1

Service Checks .................................................................................................. 6-1

Field Service Testing .................................................................................................... 6-1

Equipment and Tools ......................................................................................... 6-2

Communication Testing ................................................................................................ 6-3

Equipment Required .......................................................................................... 6-3

Pinout Chart ....................................................................................................... 6-3

Procedure........................................................................................................... 6-3

Nurse Call .......................................................................................................... 6-4

DOX SpO2Performance Testing .................................................................................. 6-5

Programming the SmartSat Analyzer................................................................. 6-5

Test Procedure................................................................................................... 6-5

Page vi eQuality™ 506DN Service Manual Criticare Systems, Inc.

Contents

NIBP Calibration............................................................................................................6-6

Equipment Required...........................................................................................6-6

Installing the PC Service Program......................................................................6-6

Configuring the Ports..........................................................................................6-6

Setup ..................................................................................................................6-7

Calibrate .............................................................................................................6-9

Safety Test .......................................................................................................6-11

Speed Test .......................................................................................................6-14

Leak Test..........................................................................................................6-16

Accuracy Test...................................................................................................6-20

Section 7 – Disassembly

Before You Begin ..........................................................................................................7-1

Service Safety .................................................................................................... 7-1

Electrostatic Discharge Protection......................................................................7-2

Tools Needed .....................................................................................................7-2

Disconnect and Remove Battery...................................................................................7-3

Detach Bezel Assembly from Housing Assembly .........................................................7-3

Bezel Disassembly ........................................................................................................ 7-4

Replace Speaker ................................................................................................7-4

Replace LCD Display .........................................................................................7-5

Replace Membrane ............................................................................................7-6

Replace Main Board ...........................................................................................7-7

Replace DOX SpO2Board .................................................................................7-9

Replace NIBP Module ......................................................................................7-10

Housing Disassembly..................................................................................................7-11

Replace Power Supply .....................................................................................7-11

Completion of Service .................................................................................................7-12

Section 8 – Troubleshooting

Troubleshooting Guide .................................................................................................. 8-1

Section 9 – Drawings and Schematics

List of Drawings............................................................................................................. 9-1

Assembly Parts Lists ..........................................................................................9-1

PCB Drawings List..............................................................................................9-1

506DN Final Assembly..................................................................................................9-2

NIBP Module .................................................................................................................9-3

506DN Monitor ..............................................................................................................9-3

Criticare Systems, Inc. eQuality™ 506DN Service Manual Page vii

Warranty

Workmanship &

Materials

Criticare Systems, Inc. (CSI) warranties new equipment to be

free from defects in workmanship and materials for a period of

two (2) years from date of shipment under normal use and service.

The 940 Series Multi-Site™ Sensor carries a six month warranty.

CSI’s obligation under this warranty is limited to repairing or

replacing, at CSI’s option, any part which upon CSI’s examination

proves defective.

EXCEPT AS DESCRIBED IN THE PARAGRAPH ABOVE, CSI

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.

Exemptions

CSI’s obligation or liability under this warranty does not include any

transportation or other charges or liability for direct, indirect or

consequential damages or delay resulting from the improper use or

application of the product or the substitution upon it of parts or

accessories not approved by CSI or repair by anyone other than a

CSI authorized representative.

This warranty shall not extend to any instrument which has been

subjected to misuse, negligence or accident; any instrument from

which CSI’s original serial number tag or product identification

markings have been altered or removed; or any product of any

other manufacturer.

Safety, Reliability &

Performance

Criticare Systems, Inc. is not responsible for the effects on safety,

reliability and performance of the 506DN Patient Monitor if: assembly

operations, extensions, readjustments, modifications or repairs are

carried out by persons other than those authorized by Criticare

Systems, Inc., or

the 506DN Patient Monitor is not used in accordance with the

instructions for use, or

the electrical installation of the relevant room does not comply with

NFPA 70: National Electric Code or NFPA 99: Standard for Health

Care Facilities (Outside the United States, the relevant room must

comply with all electrical installation regulations mandated by the

local and regional bodies of government).

In Case of Emergency

Contact

CRITICARE SYSTEMS, INC. Telephone: (262) 798-8282

20925 Crossroads Circle Tech Support: (800) 458-2697

Suite 100 Orders: (800) 458-4615

Waukesha, WI 53186 Fax: (262) 798-8290

USA

Internet: www.csiusa.com

Page viii eQuality™ 506DN Service Manual Criticare Systems, Inc.

Service Return Policy

Return Procedure

In the event that it becomes necessary to return a unit to Criticare

Systems, Inc., the following procedure should be followed:

Obtain return authorization. Contact the CSI Service Department

at 800-458-2697 to obtain a Customer Service Authorization (CSA)

number. (Outside the US, call 001-262-798-8282.) The CSA number

must appear on the outside of the shipping container. Return

shipments will not be accepted if the CSA number is not clearly

visible. Please provide the model number, serial number, and a brief

description of the reason for return.

Freight policy. The customer is responsible for freight charges

when equipment is shipped to CSI for service (this includes

customs charges).

Loaner service. In the U.S. If it is necessary to provide a loaner

system, CSI will ship a loaner by overnight courier. The loaner system

must be returned to CSI at the customer’s expense within one week

after receipt of the repaired goods. If the unit is not returned to CSI

within that time, the customer will be invoiced for the full purchase

price of the equipment.

Outside the U.S. No loaners are available from CSI internationally.

Contact your local CSI representative.

Incoming Inspection

The following incoming inspection is required whether it is a first time

arrival or a return from service. Prior to clinical use, the instrument

should be inspected for the following.

1. The quality inspection seal on the instrument should be

unbroken. This seal indicates that the instrument has been

tested according to manufacturers specifications.

2. No physical damage is observed.

3. The instrument's battery is to be charged by connecting the

instrument to a power outlet for a minimum of 6 hours prior to

clinical use.

4. When connecting the instrument to a power outlet and then

turning the instrument on, all displays appear to function

correctly and no system errors occur.

If a discrepancy to these inspection items is observed, do not use the

instrument and immediately report the discrepancy to the CSI

Service Department.

Criticare Systems, Inc. eQuality™ 506DN Service Manual Page ix

EC Declaration of Conformity

eQuality™ 506DN

Patient Monitor

To view the Declaration of Conformity, visit the Criticare website at

www.csiusa.com. A copy of the Declaration can also be faxed.

Contact Criticare’s customer service department at (262) 798-8282

to obtain a faxed copy of the Declaration.

Representative in the

European Union

Criticare Systems Limited

c/o Wright Hassall

9 Clarendon Place

Leamington Spa

Warwickshire

CV 32 5QP – United Kingdom

T: 0044 (0) 1926 886688

F: 0044 (0) 1926 885588

For the Attention of: Ref. 45 (or) Mr. L. A. Heizler

Tabla de contenidos

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación

eQuality 506DN Manual de usuario

Manuales populares de Monitor de otras marcas