Epson Twinax C82315 Manual de usuario

EPSON

Twinax

Interface Card

C82315*

USER’S GUIDE

REDIENUNGSANI FITUNG

MODE D'EMPLOI

GUIA DEL USUARlO

MANUALE PER

L'UTENTE

Errata to C82315* EPSON User’s Guide

for Software Revision 4.1

For all emulations

Host download is now supported on the parallel port as well as the IBM twinax port.

3812 emulation

X Point Forms XRess is now supported.

Escape character substituted when “logic&not E” ( E) is received. Example:

PCL command for underline = ESC & d0D (lB 26 64 30 44 ) can be sent as

E&d0D

10 CPI will print as 10.3 CPI when using A4 paper

Scalable font sod point sizes can he selected using a “logical-not F F) string.

The command format is as follows:

Fnnnnn,ppp where

ppp=desiredpointsize(11099!&

nnnnn = number of scalable font selected from the

following list

Example : F5687.25 will select the Times Roman font at 25 point

nnnnn

Scalable Foot

5687

Times Roman

5815

Times Roman Italic

5707

Ties Roman Bold

5835

Times Roman Bold Italic

34103

Sans Serif Medium

34231

Sans Serif Medium Italic

34123

Sans Serif Bold

34251

Sans Serif Bold Italic

33335

Sans Serif Condensed

33463

Sans Serif Condensed Italic

33355

Sans Serif Condensed Bold

33483

Sans Serif Condensed Bold Italic

New fonts added to support 3812 font numbers:

Typeface

Symbol Set pitch point 3812#

Courier

Courier Bold

Sonoran-Serif*

Sonoran-Serif Bold*

Sonoran-Serif Italic*

Sonoran-Serif*

Sonoran-Serif Bold*

244

245

751

1051

1053

1056

1351

1653

2103

* Uses Times Roman typeface

OMAN01

Revised 9/321/93

retrieval system, or transmitted in any form or by any means, mechanical,

photocopying, recording, or otherwise, without the prior written permission of

Seiko Epson Corporation. No patent liability is assumed with respect to the use

of the information contained herein. While every precaution has been taken in the

preparation of this book, Seiko Epson Corporation assumes no responsibility for

errors or omissions. Neither is any liability assumed for damages resulting from

the use of the Information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser

of this product or third parties for damages, losses, costs, or expenses incurred

by the purchaser or third parties as a result of: accident, misuse, or abuse of this

product or unauthorized modifications, repairs, or alterations to this product, or

(excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s

operating and maintenance instructions.

Epson and Epson ESC/P are registered trademarks of Seiko Epson Corporation.

IBM is a registered trademark of International Business Machines Corporation.

HP LaserJet II is a trademark, and Hewlett-Packard and PCL are registered

trademarks of Hewlett-Packard Company.

PostScript is a trademark of Adobe Systems Incorporated.

Command-Pass-Thru is a registered trademark of I-O Corporation.

WordPerfect is a registered trademark of WordPerfect Corporation.

Microsoft Is a registered trademark of Microsoft Corporation.

Univers, Times, and Helvetica are registered trademarks of Linotype AG and its

subsidiaries.

CG Times, CG Century Schoolbook, and Microstyle are products and CG

Triumvirate Is a trademark of AGFA Compugraphic, a Division of Agfa Corporation.

Serifa is a trademark of Fundicion Tipografica Neufville, SA.

ITC Dingbats is a U.S. registered trademark of International Typeface Corporation.

General Notice: Other product names used herein are for identification purposes

only and may be trademarks of their respective companies.

1992 by Seiko Epson Corporation

Nagano, Japan

FCC COMPLIANCE STATEMENT

FOR AMERICAN USERS

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to Pan 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment Is operated In a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used In accordance with the

instruction manual, may cause harmful interference in which case the

user will be required to correct the interference at his own expense.

This devise complies with Pan 15 of the FCC Rules. Operation Is

subject to the following two conditions:

(1) This device may not cause

harmful interference. and (2) this device must accept any interference

received, including interference that my cause undesired operation.

FOR CANADIAN USERS

This digital apparatus does not exceed the Class A limits for radio noise

emissions from digitai apparatus as set out ln the radio Interference

regulations of the Canadian Department of Communications.

Le présent apparell numérique n’émet pas de bruits radioélectriques

dépassant Ies limits applicables aux appareils numériques de Class A

prescrites dans le règiment our le brouillage radioélectrique édicté par

le Ministére des Communications du Canada.

WARNING

The connection of a non-shielded equipment Interface cable to this

equipment will invalidate the FCC Certification of this device and may

cause lnterference levels which exceed the limits established by the

FCC for this equipment. It is the responsibility of the user to obtain and

use a shielded equipment interface cable with thfs device. When this

equipment is attached to some printers. you should not leave cables

connected to the printer’s built-in connectors. See your printer’s user’s

manual for details.

Changes or modifications not expressly approved by Seiko Epson

Corporation. could void the user’s authority to operate the equipment.

TWINAX INTERFACE CARD C82315*

USER’S GUIDE

SCHNITTSTELLENDARTE TWINAX C82315*

BEDIENUNGSANLEITUNG.

CARTE D’INTERFACE TWINAX C82315*

MODE D’EMPLOI

TARJETA DE INTERFACE TWINAX C82315*

GUIA DEL USUARIO

SCHEDA DI INTERFACCIA TWINAX C82315*

MANUALE PER L’UTENTE

APPENDIX

ANHANG/APPENDlCE/APÉNDICE/APPENDICE

EPSON

Interface Card

Twinax

User’s Guide

Contents:

Introduction

..............................................

Setting up the interface card

..................................

Unpacking, the interface

...............................

Selecting the emulation

............................... 2

Preparing to install the interface card

......................

Setting the jumpers

............................

Installing the interface card

.............................

Setting the switches

...................................

Switch settings

.............................. 7

Performing a self test

.................................

Connecting to the host computer system

..................

Making additional settings

....................................

Command-pass-thru

..................................

User-defined command-pass-thru strings

............

Interface setup commands

.............................

Display station setup mode

.............................

Memory setup mode

.................................

Printersharing

............................................

Emulation details

...........................................

4214/5224 emulation

.................................

Line-feed increment

............................

Paper bins

..................................

Graphics printing

.............................

5219 emulation

.....................................

3812 emulation

.....................................

Paper tray or cassette

..........................

Computer output reduction

......................

Font id.....................................

Paper size and envelopes

.......................

Justification

.................................

Interface test modes

........................................

Hex print.. ........................................

Communications test

.................................

Interface diagnostics

.................................

Interface diagnostics error messages

...............

Interface diagnostic loopback

...........................

Specifications

.............................................

C82315* interface specifications

.........................

Parallel interface specifications

..........................

EBCDIC character tables

..............................

Appendix

................................................

A-1

Sample printouts - Self Test

............................

A-1

Display Station Setup Mode

............................

A-2

Font IDs

..........................................

A-3

Sample printouts - Hex Print

............................

A-4

Sample printouts - PC850 character set

....................

A-5

Sample printouts - HP Roman 8 character set

...............

A-6

INTRODUCTION

The Epson C82315* Twinax Interface Card allows you to connect your Epson

printer to an IBM 34/38/38 or IBM AS400 computer system or to a remote

controller connected to these systems.

This interface card provides your Epson printer with the following features:

Emulation of the IBM 5219 or 3812 letter-quality printers as well as the

IBM 4214 or 5224 matrix printers

Conformance to IBM 5250 product-attachment specifications

The ability to receive data through a multi-tap, twin-axial connected

system at a maximum burst rate of 2 million bits per second

The ability to receive data through either the twin-axial connector or

through a parallel connector, allowing you to print from both the twin-

axial system and a PC system

Automatic switching between the twin-axial connector and parallel port

based on selectable time-out periods

The ability to bypass IBM emulation and send commands directly to the

printer, allowing you to take advantage of unique Epson printer capabili-

ties

A special setup mode for changing various interface settings that allows

you to make yes or no answers to printed questions

A Display Station setup mode that displays setup information on an IBM

system display station; you can then change the settings on the screen

as necessary.

You can use the Epson C82315* Twinax Interface Card in the following Epson

printers:

DLQ-2000

LQ570/1070

SQ-870/1 170

EPL-4000/4100

Action Printer 5000/5500

ActionLaser II

LQ-870/1170

EPL-8000/8100

You may be able to use this interface on other Epson printers as well. For a list

of optional interfaces that can be used with your printer, see your printer’s user’s

manual.

SETTING UP THE INTERFACE CARD

Follow the instructions in this section to install this interface in your Epson printer.

UNPACKING THE INTERFACE

Check that in addition to this user’s guide, your interface kit includes all the items

listed below, and that none has been damaged during shipping.

Twinax interface card (in a plastic anti-static bag)

Twin-axial “V-cable’ connector

Parallel printer sharing cable

Caution: This interface can be harmed by static electricity. Leave the interface

card In the anti-static bag until you are ready to install it in your printer.

SELECTING THE EMULATION

Before you can use the printer, you must tell the host computer which IBM printer

the interface is emulating. Ask your system manager or operator to make the

settings for you.

The following table shows you the recommended settings to make in your host

system:

Emulation and host system printer setting selection

If your system

is...

and the Epson

printer you are

using is...

the emulation and you

you should should select

select is... one of the

following

host system

settings

System 36,

laser printer (using 3812 3812-1

System 38, AS400 HP commands)

and 5294 or 5394

remote controller

System 36,

24148 element dot

5219

5219 mdl D02

System 38, AS400

matrix printer or

and 5294 or 5394

laser printer (using

remote controller

ESC/P

commands)

If your system

Is...

and the Epson

printer you are

using is...

the emulation and you

you should

should select

select is... one of the

following

host system

settings

System 36,

9/24/48 element

4214

4214 model 2

System 38, AS400

dot matrix printer

and 5294 or 5394 or laser printer

remote controller (using ESC/P

commands)

System 34 or 5251

9/24/48 element

5224

5224 (2P)

m12 remote

dot matrix printer

5225 (2P)

controller

or laser printer

5258 (P)

(using ESC/P

commands)

You should keep the following in mind when selecting the emulation.

Only the 3812 emulation supports HP laser printer commands.

If you have a choice between the 5224 and 4214 emulations, you should select

4214. The 4214 emulation adds control of the following features: lines per inch,

pitch, graphics, print quality, and single-sheet handling.

If your printer supports Epson Job Language (EJL) commands, do not change the

printer mode using the EJL commands or the command-pass-thru feature while

the interface is installed. Also you may not be able to change the printer mode

using the control panel.

Never select the PostScript™ printer mode while this interface is installed.

PREPARING TO INSTALL THE INTERFACE CARD

Before installing this interface card you may need to set several jumpers,

depending

the following factors:

The type of Epson printer you are using

The type of IBM printer you want the interface to emulate

The type of twin-axial connector your host system uses

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de grabación de Epson

Epson

Epson UB-R05 Manual de uso y cuidado

Epson

Epson Connect-It P7 Manual de usuario

Epson

Epson C82312 Series Manual de usuario

Epson

Epson Connect-It SD-DSWIFIB Manual de usuario

Epson

Epson C824431 Manual de usuario

Epson

Epson C82307/08 (Serial I/F) Manual de usuario

Epson

Epson C82310/11 (Parallel I/F) Manual de usuario

Epson

Epson UB-S09 Manual de instrucciones

Epson

Epson DM-D110 Series Manual de usuario

Epson

Epson TM-P60II Manual de usuario

Epson

Epson ELPIF01 Manual de usuario

Epson

Epson ELPIF02 Manual de usuario

Epson

Epson 8133 Manual de usuario

Epson

Epson SD-USBA Manual de usuario

Epson

Epson B80818 Series Manual de usuario

Epson

Epson C826091 (PS Card) Manual de usuario

Epson

Epson C826051 (PS Card) Manual de usuario

Epson

Epson C82345 (Type B Bi-d Parallel I/F) Manual de usuario

Epson

Epson UB-S09 Manual de usuario

Epson

Epson Connect-It SD-DSETHC Manual de usuario

Epson

Epson UB-U09 Manual de instrucciones

Epson

Epson C82302/04 (Serial I/F) Manual de usuario

Epson

Epson C82303/09 (Parallel I/F) Manual de usuario

Epson

Epson C32C824161 - UB R02 Print Server Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado