Epson LightScene EV-100 Manual de usuario

Installation Manual

Using the Product Safely

Safety Instructions

This guide explains how to suspend the EV-100/EV-105 from a ceiling or install it on a wall using the supplied

Direct Mount.

Make sure you read this guide carefully to use the installation mounts and the projector safely. Incorrect

handling that ignores instructions in this guide could damage this product or could result in personal injury

or property damage. Keep this installation guide at hand for future reference.

Regarding how to handle the projector, read the User's Guide and Safety Instructions supplied with your

projector and follow the instructions in these documents.

Safety Indications

The documentation and this product use graphical symbols to show how to use this product safely and

correctly to prevent injury to customers and others, and damage to property.

The indications and their meaning are as follows. Make sure you understand them properly before reading

the guide.

Symbol Explanation

Warning This symbol indicates information that, if ignored, could possibly result in personal injury or

even death due to incorrect handling.

Caution This symbol indicates information that, if ignored, could possibly result in personal injury or

physical damage due to incorrect handling.

General Information Indications

Symbols Explanation

Symbol indicating an action that must not be done

Symbol indicating an action that should be done

Symbol indicating related or useful information

Precautions on Installing the Projector

Warning

Installing the projector on a ceiling or a wall should only be performed by a professional

with the necessary skills and know-how.

If installation work is not carried out correctly, the mount or the projector could fall causing injury

or accident to occur.

Follow the instructions in this guide when performing installation work.

If the instructions are not followed, the mount or the projector could fall causing injury or accident

to occur.

Installation should be performed by at least two people. Also, make sure you have a secure,

stable footing so that you do not drop the mount or the projector.

Using the Product Safely

Warning

Make sure you attach the safety wire supplied with the projector to prevent the mount

from falling due to earthquakes or vibrations.

Do not attach anything to this mount except for a projector from EPSON.

Otherwise, the mount may falls and could cause death or personal injury.

When installing, make sure you install a breaker (with a rated current of 10 A or less) in a

location within reach.

If any problems occur during installation, turn off the internal wiring immediately.

Note the following when handling the power cable. Otherwise, it could cause a fire or

electric shock.

•

Do not handle the plug with wet hands

•

Do not use a damaged or modified power cable

•

Do not apply excessive force to the power cable

•

Do not trap the cable between parts of the mount and so on during installation

Wheninstalling,donotpullorapplyexcessiveforcetothecableconnectedtotheprojector.

Do not wind cables around the projector or the mount.

When wiring cables and so on, route the cables so that it avoids the screws and bolts.

If the cables come into contact with screws or bolts, it could cause a fire or electric shock to occur.

Make sure you tighten the screws or bolts completely when installing.

If they are not tightened completely, the mount or the projector could fall causing injury or accident

to occur.

Never loosen the screws or bolts after installation.

Make sure that you check for any loose screws or bolts on a regular basis, and if any are loose,

tighten them completely. If they are not tightened completely, the mount or the projector could

fall causing injury or accident to occur.

When securing the mount, do not use adhesives to prevent the screws from loosening,

and do not use lubricants, oils, and so on.

If you use adhesives to prevent the screws from loosening, or if you use things such as lubricants

or oils, the mount or the projector case may crack causing an injury or an accident.

Do not hang from the mount or the projector, and do not place heavy objects on them.

Otherwise, the mount or the projector may fall and could cause death or injury.

Do not apply excessive force to the projector or the mount when installing.

Otherwise, the mount or the projector may be damaged and could cause death or injury.

Do not install in the following situations. Contact your local dealer or Epson Service Call

Center.

•

If the product has been dropped or damaged before or during installation

•

If the mount is abnormal or damaged

Using the Product Safely

Warnings and Cautions on the Installation Locations

Warning

Do not attach this mount to the floor.

This mount can only be installed on a ceiling or a wall.

Check the structure and material of the surface to which the mount will be installed, and

use the optimum installation method.

Make sure the surface to which the mount will be installed is strong enough.

The total maximum weight of the projector and Direct Mount is approximately 7.0 kg (approx. 5.1

kg for the projector/approx. 1.9 kg for the Direct Mount) (not including cables).

Do not install the mount or projector in an unstable location where it might be subjected

to vibrations or shocks.

The surface to which the mount is attached may be damaged. Also, the mount or projector may

fall and cause an injury or accident to occur.

Do not install or use the projector in locations where it could be exposed to rain or water,

such as outdoors, in baths or shower rooms.

Otherwise, it could cause a fire or electric shock.

Do not use the projector in a location subject to combustible or explosive gas.

If the inside of the projector gets too hot, it could ignite and cause a fire.

Do not cover the projector's air intake vent or air exhaust vent.

If either of the vents are covered, the projector's internal temperature could rise and cause a fire.

Caution

Do not install the projector in a location outside the projector's operating temperature

range.

Such an environment may damage the projector.

Install it away from air outlets such as air conditioners.

If the air from an air conditioner and so on flows directly over the projector, the temperature rises

and the projector may not operate correctly.

Install it away from fluorescent lights.

Some kinds of fluorescent lights could interfere with the remote control of the projector.

Install it in a location where strong light such as fluorescent light and direct sunlight does

not shine on the remote receiver.

If strong rays of light shine on the remote receiver, remote control operations may not be performed

correctly.

Make sure you install the projector in a location free from excessive dust and humidity to

prevent the lens or internal components from becoming dirty.

Display Position of Manufacturers Nameplate

The product nameplate is displayed on the top of the projector as shown below. Before installing the mount

to the projector, check the numbers on the product nameplate.

Using the Product Safely

Rated Voltage 100-240 V

Rating Frequency 50/60 Hz

Rating Current 1.8-0.8 A

Installation Orientation

Check the following points when installing on a wall or a ceiling that is inclined.

•Do not face the power inlet upward

Correct (power inlet fac-

ing down)

Incorrect (power inlet facing up)

•Do not turn the power supply sideways

Incorrect (power supply facing sideways)

Contents

Using the Product Safely

SafetyInstructions .................... 1

SafetyIndications .......................1

GeneralInformationIndications.............1

PrecautionsonInstallingtheProjector........1

Warnings and Cautions on the Installation

Locations ............................. 3

Display Position of Manufacturers Nameplate . . . 3

InstallationOrientation...................4

Preparing the Projector

Package Contents . . ................... 6

Connectable Devices and Necessary

Cables ............................... 7

ProjectionDistanceTable .............. 8

16:10projectedimage .................... 9

4:3projectedimage ..................... 10

16:9projectedimage .................... 11

Installation Procedure

PreparingtheProjector .............. 12

Attaching the Projector Mount to the

Projector ............................ 13

Attaching the Ceiling Mount to a

CeilingoraWall ..................... 15

InstallingtheSafetyWire ............. 16

Combining the Projector Mount with

theCeilingMount .................... 17

ConnectingCables ................... 18

Adjusting the Orientation of the

Projector ............................ 19

AttachingtheCovers ................. 20

AttachingthePowerAdapterCover.........20

AttachingtheMountCover ................ 20

Appendix

Specification . . . . . ................... 21

Appearance ........................... 21

AssemblyDimensions ................... 22

Preparing the Projector

Package Contents

Check that you have all of the following accessories before you start work.

Projector mount (*1) Ceiling mount (*1) Mount cover (*2)

Safety wire

(500 mm)

Wire hook mount

Shape Name

Quan-

tity

Application

M4 x 12 mm cross recessed head screw

(with washer)

4 Secures the projector mount to the projector.

(4) Combines and secures a projector mount and

a ceiling mount.

*1 The projector mount and the ceiling mount

are combined and secured by these screws

temporarily at the time of purchase. Unscrew

them before installing.

M3 x 6 mm cross recessed head screw (2) Secures the mount cover.

*2 The mount cover is secured by these screws

temporarily at the time of purchase. Unscrew

them before installing.

•Make sure you use the bolts or screws supplied with this product to install mounts.

•Gather the tools and parts you need before you begin installation.

Preparing the Projector

Connectable Devices and Necessary Cables

Be sure to prepare the power cable supplied.

Additionally, prepare the necessary cables according to the devices being used.

Connects the power cable to the projector.

Connects the projector to a network hub and so on using a LAN cable.

Connects the projector to a computer or video sources with an HDMI cable. Secure it with the cable clamp

supplied to prevent the HDMI cable from disconnecting under its own weight.

Insert an SD card into this slot.

Connects to a speaker with an audio cable.

Preparing the Projector

Projection Distance Table

To find the appropriate projection distance, see the following figures when installing. The values are only

rough estimates.

:Projection Distance

:Center of lens

Preparing the Projector

16:10 projected image

[Unit: mm]

Projected image size Projection Distance

Minimum (Wide) to Maximum (Tele)

30" 640x400 880 - 1410

40" 860x540 1180 - 1890

50" 1080x670 1490 - 2370

60" 1290x810 1790 - 2850

80" 1720x1080 2390 - 3810

100" 2150x1350 3000 - 4760

120" 2580x1620 3600 - 5720

133" 2860x1790 4000 - 6340

150" 3230x2020 4510 - 7160

•The values are only rough estimates. The value may differ depending on the location where you place

the projector.

•When projecting in Tele, the quality of the projected images may decrease.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Epson

Epson

Epson BrightLink 475Wi Manual de instrucciones

Epson

Epson ActionPrinter 4000 Manual de usuario

Epson

Epson PowerLite 1940W Manual de usuario

Epson

Epson EB-Z10005U Manual de usuario

Epson

Epson 821p - PowerLite XGA LCD Projector Manual de usuario

Epson

Epson EMP-TW680 dreamio Manual de usuario

Epson

Epson 830p - PowerLite XGA LCD Projector Manual

Epson

Epson EX3280 Hoja de especificaciones

Epson

Epson PowerLite 1940W Manual de usuario

Epson

Epson PowerLite 1221 Guía de referencia

Epson

Epson W70 Hoja de especificaciones

Epson

Epson EasyMP EMP-735 Manual de usuario

Epson

Epson PowerLite 700 Manual de usuario

Epson

Epson PowerLite 420 Hoja de especificaciones

Epson

Epson MovieMate 30s Manual de usuario

Epson

Epson EasyMP Monitor 4.50 Manual de usuario

Epson

Epson EasyMP.net Network Option Board Manual de usuario

Epson

Epson PowerLite 900 Hoja de especificaciones

Epson

Epson CO-FH02 Manual de usuario

Epson

Epson PowerLite 5300 Manual de usuario

Epson

Epson PowerLite EMP-1810 Manual de usuario

Epson

Epson PowerLite 420 Manual de usuario

Epson

Epson PowerLite Home Cinema 6500 UB - PowerLite Home Cinema... Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Guía de referencia

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manual de usuario

JVC

JVC 1108TTH-AO-AO Manual de usuario