Epson ESC Manual de usuario

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

ESC/VP21 Command User’s Guide for

Home Projectors

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

Table of Contents

1. Introduction to ESC/VP21..................................................................................................................................3

2. ESC/VP21 Command Formats...........................................................................................................................4

3. Applicable models ...............................................................................................................................................4

4. Command Table...................................................................................................................................................5

5. Appendix..............................................................................................................................................................8

6. Revision History..................................................................................................................................................9

means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.

No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages

resulting from the use of the information contained herein.

Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchase of this product or third parties for damages,

losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or

unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.)failure to strictly comply with SEIKO EPSON

CORPORATION(s operating and maintenance instructions.

SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any options or any

consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEKO EPSON

CORPORATION.

EPSON is a registered trademark of SEIKO EPSON CORPORATION. EasyMP is a trademark of SEIKO EPSON CORPORATION.

Macintosh, Mac, and iMac are registered trademarks of Apple Computer, Inc. IBM is a registered trademark of International Business

Machines Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation in the United States of America.

General Notice:

Other product names used herein are also for identification purposes only and may be trademarks of their respective owner. EPSON

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

1. Introduction to ESC/VP21

ESC/VP21 is a control command and protocol for Epson projectors, which is used for A/V controller to control and

monitor Epson projectors. The command codes are comprised of ASCII codes. Therefore the command codes can be

understood very easily and you can easily control projectors using a PC with a terminal emulator such as Microsoft Hyper

terminal.

Since ESC/VP21 is independent of communication protocols. Serial, USB or TCP/IP network can be used to transmit the

commands to projectors.

* Serial connection

A/V controller normally use as serial connection to control projectors. Refer to Appendix for details.

* USBconnection

A USB interface can be used to control a projector. Refer to Appendix for details.

* Network connection

After establishing a TCP session, ESC/VP21 commands can be sent to projectors. Refer to ESC/VP.net protocol manual

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

2. ESC/VP21 Command Formats

2.1. Set command format

A set command consists of a command and a parameter. Projector returns a colon after executing the command.

There are two types of parameters. One is fixed such as ON, OFF, or 21. Other is a step parameter such as INC, DEC or

INIT.

INC: increments the parameter by one.

DEC: decrements the parameter by one.

INIT: initializes the parameter.

2.2. Get command format

A get command consists of a command and ?. Projector returns a response parameter after executing the command.

2.3. Null command

The null command is as command code of the return key code (Hex 0D). Projector returns a colon。The null command

can be used to confirm that the projector is in operation.

2.4. Illegal commands

Projector returns “ERR” and a return key code (Hex 0D)and a colon when it receives invalid commands.

ERR

：

3. Applicable models

ELP-TW100/TW100H/TS10, EMP-TW10/TW200/TW500/TW10H/TW200H/TW20/TW600/TW520/TW550/

TW800/TW700/TW1000/TW2000, EH-TW2800/TW3000/TW3800/TW4000/TW5000/TW5800/TW2900/

TW3500/TW4400/TW4500/TW5500, EH-TW420/TW450, PL-HomeCinema400/700/720/1080/1080UB/705HD

6100/6500UB/8100/8500UB, PL-ProCinema800/810/1080/1080UB/7100/7500UB/9100/9500UB

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

4. Command Table Command Command Models All Models

ON PWR ON Available (*1)PWR ON OFF PWR OFF Available

ON MUTE ON AvailablePWR OFF (note4) OFF MUTE OFF Available

Black MSEL 00 Available

Blue MSEL 01 Available

SOURCE (note3)

User Logo MSEL 02 Available (*2)

(*1)The "PWR ON" command for TW200 and TW200H needs to prepare for use. First step is to turn on the projector.

And then send the

"SPWRLVL 01" command to the projector after the status of projector goes into the condition that the projector can

receive ESC/VP21 command.

Second steps is to turn off the projector once. The "PWR ON" can work on TW200 and TW200H after the status of

projector becomes the standby state.

•TW500 needs to change the setting item to use "PWR ON" command. To validate the "PWR ON" command of

TW500, "Network Monitoring" of "Operation" in "Setting" menu must be set to ON. The "PWR ON" command can

work on TW500 after the projector is turned off once and the status of projector becomes the standby state.

(*2)TW10/TW10H does not support the User Logo function.

Item Terminal Signal name Command TW100/

100H TS10 TW10/

10H TW200/

200H TW500

Cyclic within “SOURCE 1x” SOURCE 10 OK OK OK(*3)

OK OK

Analog RGB SOURCE 11 OK OK --OK

Digital RGB SOURCE 12 -OK ---

RGB Video SOURCE 13 -OK OK OK OK

YCbCr (*4 Component) SOURCE 14 --OK OK OK

YPbPr (*4 Component) SOURCE 15 --OK OK OK

INPUT 1/A

Auto SOURCE 1F ----OK

Cyclic within “SOURCE 2x” SOURCE 20 OK OK OK(*3)

OK OK

Analog RGB SOURCE 21 OK OK OK OK OK

RGB Video SOURCE 22 -OK ---

YCbCr (*5 Component) SOURCE 23 OK OK --OK

YPbPr (*5 Component) SOURCE 24 OK OK --OK

YPbPr SOURCE 25 ----OK

INPUT 2/B

Auto SOURCE 2F ----OK

Cyclic within “SOURCE 3x” SOURCE 30 ----OK

INPUT 3 Digital RGB SOURCE 31 OK ----

Cyclic within “SOURCE Cx” SOURCE C0 ---OK OK

YCbCr SOURCE C4 ---OK OK

YPbPr SOURCE C5 ---OK OK

INPUT 5

Auto SOURCE CF ----OK

VIDEO Cyclic within “SOURCE 4x” SOURCE 40 OK OK OK OK OK

VIDEO (RCA) <= SOURCE 41 OK OK OK OK OK

VIDEO (S) <= SOURCE 42 OK OK OK OK OK

VIDEO (YCbCr)

<= SOURCE 43 OK ----

Source change

VIDEO (YPbPr) <= SOURCE 44 OK ----

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

Item Terminal Signal name Command TW20 TW600

TW700

TW1000

TW2000

Cyclic within “SOURCE 1x” SOURCE 10 OK OK OK OK OK

Analog RGB SOURCE 11 -----

Digital RGB SOURCE 12 -----

RGB Video SOURCE 13 OK ----

YCbCr (*4 Component) SOURCE 14 OK OK OK OK OK

YPbPr (*4 Component) SOURCE 15 OK OK OK OK OK

INPUT 1/A

Auto SOURCE 1F -OK OK OK OK

Cyclic within “SOURCE 2x” SOURCE 20 OK OK OK OK OK

Analog RGB SOURCE 21 OK OK OK OK OK

RGB Video SOURCE 22 -----

YCbCr (*5 Component) SOURCE 23 -----

YPbPr (*5 Component) SOURCE 24 -----

YPbPr SOURCE 25 -----

INPUT 2/B

Auto SOURCE 2F -----

Cyclic within “SOURCE 3x” SOURCE 30 -OK OK OK OK

INPUT 3 Digital RGB SOURCE 31 -----

Cyclic within “SOURCE Cx” SOURCE C0 -OK OK OK -

SCART (*6) SOURCE C3 -OK OK OK -

YCbCr SOURCE C4 -OK OK OK -

YPbPr SOURCE C5 -OK OK OK -

INPUT 5

Auto SOURCE CF -OK OK OK -

HDMI2 HDMI SOURCEA0 ----OK

VIDEO Cyclic within “SOURCE 4x” SOURCE 40 OK OK OK OK OK

VIDEO (RCA) <= SOURCE 41 OK OK OK OK OK

VIDEO (S) <= SOURCE 42 OK OK OK OK OK

VIDEO (YCbCr)

<= SOURCE 43 -----

Source

change

VIDEO (YPbPr) <= SOURCE 44 -----

Item Terminal Signal name Command

TW2800

TW3000

TW3800

HC6100

PC7100

TW4000/

HC6500U

TW5000/

PC7500U

TW2900

TW3500

HC8100

PC9100

TW4400

TW4500

HC8500UB

Cyclic within “SOURCE 1x” SOURCE 10 OK OK OK OK OK

Analog RGB SOURCE 11 -----

Digital RGB SOURCE 12 -----

RGB Video SOURCE 13 -----

YCbCr (*4 Component) SOURCE 14 OK OK OK OK OK

YPbPr (*4 Component) SOURCE 15 OK OK OK OK OK

INPUT 1/A

Auto SOURCE 1F OK OK OK OK OK

Cyclic within “SOURCE 2x” SOURCE 20 OK OK OK OK OK

Analog RGB SOURCE 21 OK OK OK OK OK

RGB Video SOURCE 22 -----

YCbCr (*5 Component) SOURCE 23 -----

YPbPr (*5 Component) SOURCE 24 -----

YPbPr SOURCE 25 -----

INPUT 2/B

Auto SOURCE 2F -----

Cyclic within “SOURCE 3x” SOURCE 30 OK OK OK OK OK

INPUT 3 Digital RGB SOURCE 31 -----

Cyclic within “SOURCE Cx” SOURCE C0 -----

YCbCr SOURCE C4 -----

YPbPr SOURCE C5 -----

INPUT 5

Auto SOURCE CF -----

HDMI2 HDMI SOURCEA0 OK OK OK OK OK

VIDEO Cyclic within “SOURCE 4x” SOURCE 40 OK OK OK OK OK

VIDEO (RCA) <= SOURCE 41 OK OK OK OK OK

VIDEO (S) <= SOURCE 42 OK OK OK OK OK

VIDEO (YCbCr)

<= SOURCE 43 -----

Source

change

VIDEO (YPbPr) <= SOURCE 44 -----

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

Item Terminal Signal name Command TW5500

PC9500UB

TW420

HC700 TW450

HC705HD

Cyclic within “SOURCE 1x” SOURCE 10 OK OK OK

Analog RGB SOURCE 11 -OK OK

Digital RGB SOURCE 12 --

RGB Video SOURCE 13 --

YCbCr (*4 Component) SOURCE 14 OK OK(*7) OK(*7)

YPbPr (*4 Component) SOURCE 15 OK -

INPUT 1/A

Auto SOURCE 1F OK OK OK

Cyclic within “SOURCE 2x” SOURCE 20 OK -

Analog RGB SOURCE 21 OK -

RGB Video SOURCE 22 --

YCbCr (*5 Component) SOURCE 23 --

YPbPr (*5 Component) SOURCE 24 --

YPbPr SOURCE 25 --

INPUT 2/B

Auto SOURCE 2F --

Cyclic within “SOURCE 3x” SOURCE 30 OK OK OK

INPUT 3 Digital RGB SOURCE 31 --

Cyclic within “SOURCE Cx” SOURCE C0 --

YCbCr SOURCE C4 --

YPbPr SOURCE C5 --

INPUT 5

Auto SOURCE CF --

HDMI2 HDMI SOURCEA0 OK -

VIDEO Cyclic within “SOURCE 4x” SOURCE 40 OK -OK

VIDEO (RCA) <= SOURCE 41 OK OK OK

VIDEO (S) <= SOURCE 42 OK OK OK

VIDEO (YCbCr)

<= SOURCE 43 --

Source

change

VIDEO (YPbPr) <= SOURCE 44 --

(*3)Only when TW10 is connected, the source is not cycled within a signal that can select on a terminal by these commands.

(*4)This signal is selected whenTW10 and TW20 isconnected.

(*5)This signal is selected whenTW500 is connected.

(*6)This signal is selected whenTW600/520/550/800/700/1000 is connected.

(*7)This command is can be used only for get.

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

5. Appendix

5.1. Communication specification

A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by

sending commands to the projector.

Serial Connection

(TW100,TS10,TW10,TW200,TW500,TW10H,TW200H,TW20,TW600/520/550/800,TW700,TW1000,TW2000,

TW3000/TW4000/TW5000, TW2900/TW3500/HomeCinema8100/ProCinema9100, TW4400/TW4500/

HomeCinema8500UB/ProCinema9500UB, TW450/HomeCinema705HD)

・Select RS-232C at Advanced Setting of the Menu.

・Communication condition

Baud rate :9600bps

Data length :8 bits

Parity :No

Stop bit : 1 bit

Flow control : No

・Connector : D-Sub 9pin

・Projector input : Control(RS-232C)

ビジネスプロジェクター用 ESC/VP21 コマンド使用ガイド

ESC/VP21 Command User

’

s Guide for Home Projectors

6. Revision History

Revision

Issued date Page Description

AOct 19,2005 All pages First Release

BSep 29,2006 All pages Addition of TW700

CMar 19,2007 All pages Addition of TW1000

DJun 4,2007 All pages Correction of “Applicable Model”.

EDec 14,2007 All pages Addition of TW2000

FNov 14,2008 All pages Addition of TW3000 and TW4000

GDec 2, 2008 All pages Addition of TW5000 and TW420

HMar 11, 2010 All pages Addition of TW2900/3500/HomeCinema8100/ProCinema9100,

TW4400/TW4500/HomeCinema8500UB/ProCinema9500UB

TW450/HomeCinema705HD

Otros manuales para ESC

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Epson

Epson

Epson PowerLite Pro Cinema 800 Manual de usuario

Epson

Epson PowerLite W16SK Manual de usuario

Epson

Epson PowerLite S4 Hoja de especificaciones

Epson

Epson ELPMB47 Manual de usuario

Epson

Epson PowerLite 8300i withEasyMP.net module Guía de inicio rápido

Epson

Epson EB-G5600 Manual de usuario

Epson

Epson EB-935W Manual de usuario

Epson

Epson 410W - PowerLite WXGA LCD Projector Manual de usuario

Epson

Epson EB-PU2116B Manual de usuario

Epson

Epson PowerLite Pro Cinema 9700 UB Guía de instalación

Epson

Epson MeetingMate EB-1410Wi Manual de usuario

Epson

Epson PowerLite 95 Manual de usuario

Epson

Epson PowerLite 1770W Manual de usuario

Epson

Epson EB-1860 Manual de usuario

Epson

Epson EMP-54 Hoja de instrucciones

Epson

Epson 835p - PowerLite XGA LCD Projector Hoja de especificaciones

Epson

Epson PowerLite 955W Hoja de especificaciones

Epson

Epson PowerLite 5500c Manual de usuario

Epson

Epson 9000i - PowerLite SXGA LCD Projector Manual de usuario

Epson

Epson EB-480 Manual de usuario

Epson

Epson PowerLite U50 Hoja de especificaciones

Epson

Epson PowerLite Pro G5650W Manual de usuario

Epson

Epson EMP-TW100 Manual de usuario

Epson

Epson EB-1795F Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manual de usuario

JVC

JVC 1108TTH-AO-AO Manual de usuario