Epson EMP-1815 Manual de instrucciones

English

This guide explains how to easily connect a computer to the projector using a

network. For a detailed explanation of the operating method, see "Projecting

Images from a Computer via a Network" in the EasyMP Operation Guide.

First, prepare the following items:

YEasyMP Software CD-ROM (supplied)

YComputer

vA computer that can be connected to a network

vA computer with a built-in wireless LAN or a computer in which a wireless LAN card

can be inserted

vA computer that satisfies the software requirements outlined on the following page

Contents of the EasyMP Software CD-ROM

*1 Operation Details sEasyMP Operation Guide

*2 Operation Details sEMP Monitor Operation Guide

Contents

Preparing the Computer..................................................4

Preparing the Projector ...................................................7

Connecting (Windows/Macintosh).................................10

Disconnecting................................................................12

Connecting with a USB cable (Windows)......................13

Features of the EasyMP Function.................................15

Notes When Using a Wireless LAN ..............................16

Install

EMP NS Connection

This software is

necessary to connect the

projector to the

network*1.

Necessary

EMP SlideMaker2

This software creates

scenarios for

presentations. Project by

using the projector’s PC

Free function*1.

Necessary

EMP Monitor

This software allows you

to monitor the status of

the projector from a

computer*2.

Software Requirements

Runs under the following operating environment.

*1 This is not included in the EasyMP Software CD-ROM. Download this software from the projector.

sp.13

This software is not supported on the Macintosh.

*2 To open PowerPoint files, one of Office2000/XP/2003 or PowerPoint2000/2002/2003/2007 is

required.

Preparing the Computer

EMP NS Connection

USB Display*1 EMP

SlideMaker2*2 EMP Monitor

Windows

2000 SP4/XP/XP SP1/

XP SP2/Vista 32bit

Windows 98/98 SE/

Me/2000/XP/Vista

32bit

Windows 98 SE/Me/NT

4.0/2000 Professional/XP

Home Edition/

XP Professional/Vista

32bit

Internet Explorer Ver 5.0

or later

Macintosh

Mac OS X 10.3 or later

Recommended: Mac OS

10.4.5 or later/10.3.9

CPU

Windows

Mobile Pentium III 1.2 GHz or

Recommended: Pentium M

1.2 GHz or more

Celeron 300 MHz

or more

Recommended:

Celeron 400 MHz

or more

Pentium MMX 166 MHz

or more

Recommended: Pentium

II 233 MHz or more

Macintosh

Power PC G3 900 MHz or

Memory

capacity

256 MB or more

Recommended: 512 MB or

64 MB or more

Recommended:

128 MB or more

64 MB or more

Available

harddisk

space

20 MB or more 12 MB or more 50 MB or more

Display

Resolution of XGA (1024 x

768) or higher

16 bit or higher colour

display, Colour display of

about 32,000 colours

Resolution of SVGA (800

x 600) or higher

32 bit or higher colour

display

English

Installing EasyMP Software

1Turn on the computer.

2Insert the EasyMP Software CD-ROM into

the computer.

The installer starts automatically.

Select "Easy Install".

In the "EPSON" window, double-click the

"Installer for Mac OS X" icon. The installer starts.

Installation starts. Follow the instructions on the

screen.

vClick "Install" on the software selection screen.

vClick "Yes" on the license agreement screen to

continue installation.

vSelect the virtual display to use on the "Add/

Remove EPSON Virtual Display" screen.

vIn Windows Vista, the "Multi-screen Display"

function is not available, so the "EPSON Virtual

Display" driver is not installed.

vIf using Windows 2000/NT4.0/XP/vista, installation can only be carried out by a user

with administrator privileges.

vMake sure you close all open applications.

Procedure

For Windows

For Macintosh

Add or remove Virtual Displays

License agreement screen

vYou need "Virtual Video Driver" to use

"Multi-screen Display". If you do not install

it here, you can install it later. (Select

"Start" - "Programs" - "EPSON Projector"

- "Add and Delete EPSON Virtual

Display")

vWhen the maximum four installed virtual

displays are selected, the computer you

are using may slow down depending on

its operating environment.

3Click "Finish" to complete the installation.

Next, SlideMaker2 and EMP Monitor are

installed. Continue by following the instructions

on the screen.

Finish installation

Troubleshooting

If this screen is displayed

If installation does not start

Select "Yes" (Windows 2000) or "Continue Anyway"

(Windows XP).

Select "Start" - "Run", and then in the "Run" dialog box, type the letter for your CD-

ROM drive followed by ":\\Epsetup.exe" and then click the "OK" button.

English

Confirming the projector's network settings

The following explains how to set up the wireless LAN by operating the

remote control (supplied).

Use the [ ] button to move and the [Enter] button to confirm.

1Press the [Power] button on the remote

control to turn on the projector.

2Press the [Menu] button on the remote

control.

The configuration menu is displayed.

3Select "Network"

The network menu is displayed.

4Select "To Network Configuration"

The Network setting screen is displayed.

Preparing the Projector

Procedure

To connect the wireless LAN, install the wireless LAN

unit on the projector.

Check the orientation of the supplied

Wireless LAN unit, and install it to the

projector.

Configuration menu

5Select "Basic" and set "Projector name"

and "Projector keyword".

6Select "Wireless LAN" and set "ESSID"

In the case of a wired LAN, select "Wired LAN"

and set the required items.

7Select "ESC" and press the [Enter] button on the remote control.

8Select the "Setup complete" menu and press the [Enter] button on the

remote control.

9Select "Yes" and press the [Enter] button on the remote control.

Network setting "Basic" screen

Item Explanation

Projector name The name of the projector. The name set here is displayed

in the projector list when connected.

EMPxxxxxx (xxxxxx is a specific number) is displayed.

Change it to an easy-to-remember name.

Enter alphanumeric characters.

Enter example: EPSON001

PJLink Password Not necessary to set.

Web Control Password Not necessary to set.

Projector keyword When set to "ON", a keyword must be entered when

connecting to the network. This can prevent computers from

making unscheduled connections and interrupting

presentations.

Usually this should be set to "ON".

Network setting screen

See the following table for an explanation of

the items.

See the following table for an explanation of

the items.

English

Network setting "Wireless LAN" screen

Network setting "Wired LAN" screen

Item Explanation

Connection mode Set the connection mode.

Antenna level Displays the electromagnetic wave strength for the wireless

LAN.

Wireless LAN system Set the same wireless LAN system as the computer's.

ESSID Displayed as "EPSON". You can change it or leave it as it is.

DHCP Set whether to use DHCP (On) or not (Off).

IP address Enter the IP address to be assigned to the projector. The

following IP addresses are not available:

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255

("x" stands for any number in the range 0 to 255.)

Subnet mask Enter the projector's subnet mask. The following subnet

masks are not available:

0.0.0.0, 255.255.255.255

Gateway address Enter the gateway's IP address. The following IP addresses

are not available:

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255

("x" stands for any number in the range 0 to 255.)

DNS server (primary)/

DNS server (secondary)

Not necessary to set.

Item Explanation

DHCP Set whether to use DHCP (On) or not (Off).

IP address Enter the IP address to be assigned to the projector. The

following IP addresses are not available:

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255

("x" stands for any number in the range 0 to 255.)

Subnet mask Enter the projector's subnet mask. The following subnet

masks are not available:

0.0.0.0, 255.255.255.255

Gateway address Enter the gateway's IP address. The following IP addresses

are not available:

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255

("x" stands for any number in the range 0 to 255.)

(Projector operation)

1Press the [Power] button on the remote

control to turn on the projector.

2Press the [EasyMP] button on the remote

control.

The EasyMP screen is displayed.

(Computer operation)

3Select "Start" - "Programs" - (or "All

Programs") - "EPSON Projector" - "EMP

NS Connection".

EMP NS Connection starts.

In Windows Vista, the "User Account Control"*

screen is displayed. Enter your account in this

screen.

In the volume of the hard disk where EMP

NS connection is installed, double-click

the "Applications" folder and then double-

click the EMP NS Connection icon.

EMP NS Connection starts.

*To disable display of the "User Account Control" screen

each time that EMP NS Connection is started up, set the

firewall settings to "On (recommended)", and register EMP

NS Connection at "Exceptions".

Connecting (Windows/Macintosh)

Procedure

For Windows

For Macintosh

EasyMP Screen

If the screen on the right is displayed during

start up, click the "Yes" button.

When "Yes" is clicked, a firewall exception is

created for EMP NS Connection and it is then

available.

Otros manuales para EMP-1815

Este manual sirve para los siguientes modelos

Tabla de contenidos

Idiomas:

Otros manuales de Proyector de Epson

Epson

Epson BrightLink 450Wi - Interactive Projector Manual de usuario

Epson

Epson EB-710Ui Manual de usuario

Epson

Epson EB-X14G Manual de usuario

Epson

Epson PowerLite 575W Hoja de especificaciones

Epson

Epson EB-W02 Manual de usuario

Epson

Epson BrightLink Pro 1430Wi Hoja de especificaciones

Epson

Epson Home Cinema 2350 Manual de usuario

Epson

Epson EasyMP EMP-735 Manual de usuario

Epson

Epson PowerLite Home 10 Manual de usuario

Epson

Epson EX9200 Pro Hoja de especificaciones

Epson

Epson EMP 760 Manual de usuario

Epson

Epson EB-S17 Manual de usuario

Epson

Epson EB-L520U Manual de usuario

Epson

Epson EMP 71 Manual de usuario

Epson

Epson EB-590WT Manual de usuario

Epson

Epson PowerLite EB-720 Hoja de especificaciones

Epson

Epson EB-945 Instrucciones de instalación

Epson

Epson PowerLite 74c Manual de usuario

Epson

Epson PowerLite 955W Hoja de especificaciones

Epson

Epson EMP-62 Manual de usuario

Epson

Epson EH-TW6100 Manual de usuario

Epson

Epson Pro Cinema 4050 Manual de usuario

Epson

Epson 5350 - EMP SVGA LCD Projector Manual de usuario

Epson

Epson BrightLink 475Wi Guía de referencia

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manual de usuario

JVC

JVC 1108TTH-AO-AO Manual de usuario