Epson AP-60 - Projector Sound Solution Dimensiones

EPSON PRODUCT SUPPORT BULLETIN

Date: 12/24/2009 Originator: esc

PSB #: PSB.2010.01.001 Authorization:

Reference: TI09-68e Rev. A and B Total Pages: 8

Product(s): AP-60 Projector Sound Solution

Subject: Firmware Update – Improves Sound Quality

This bulletin was created to inform you about an updated firmware release for the AP-60

Projector Sound Solution unit to improve the performance described below.

Improvements:

•Improves the sound performance when feedback is present.

Serial Numbers Affected:

AP-60 Serial numbers with the countermeasure: G91121915~G91121920 /

G00120001~G00120480 (January, 2010 shipment)

Note: The following serial numbers were included in the January, 2010 shipment, and

these units do not have the countermeasure: G91121891 / G91121897 /

G91121899~G91121914

Required Equipment and Preparation:

Required:

•AP-60 unit to be updated

•PC computer running Windows 98SE / Me / 2000 / XP

•RS232 Null modem serial cable

•Firmware/DownLoader files: BTLD_Test.exe, btldtest.ini, DSP_code.hex (included in

epson13644.exe package)

•Download and extract epson13644.exe package. The files are extracted and copied to

C:\EPSON\epson13644_ap60_downloader_firmware_13.

Page 1 of 8

PSB.2010.01.001

How to Establish Serial Communication between the AP-60 and the Computer:

a) Download epson13644.exe package which includes the following files:

1. BTLD_Test.exe

2. btldtest.ini

3. DSP_code.hex

b) Remove two Phillip screws from the audio control board then slide out the audio

control board to access the RS-232 connector.

c) Connect one end of the RS-232 cable to the backside of the RS-232 port and the

other end of the cable to the PC. Then restart the PC.

Page 2 of 8

PSB.2010.01.001

Page 3 of 8

PSB.2010.01.001

1) Connect the power cable to the AP-60 unit (Power LED is solid orange) -- do not turn it

on. Verify the null modem cable is connected to the AP-60 unit RS-232c and computer RS-

232c serial ports.

When the AP-60 is in Standby Mode, hold down the Power button (black button on the

front left side of the audio control board) for at least 3 seconds or more until

the Power light LED shows blinking green—release when the Power LED is blinking green.

a) If the Power LED does not show blinking green, set the projector to standby mode

and hold down the power button again for 3 seconds or more.

b) Right-click My Computer on the PC desktop screen then click Manage.

2. Click Device Manager and expand Ports (COM & LPT). Then note the available

COM Port number. The following example shows the assigned port number as COM1.

3. Open the C:\EPSON\epson13644_ap60_downloader_firmware_13 to find the three files:

a) BTLD_Test.exe

b) Btldtest.ini

c) DSP_code.hex

4. Open btldtest.ini file and verify the COM Port number.

It should match the COM Port number noted in the previous step.

If the COM Port number does not match the settings in Step 2 above, make the changes

then save the file and close the window.

5. Launch BTLD_Test.exe

If the wrong port number is entered in the window shown in the previous step, the

following error message will display.

Page 4 of 8

PSB.2010.01.001

6. When each button in the following screen is active, the serial communication is available.

If the serial communication is not available, the buttons in the window are grayed out

as shown below.

•Confirm that the AP-60’s power light exhibits the flashing green LED again.

•Reseat the cable

•Restart PC

•Restart AP 60

Page 5 of 8

PSB.2010.01.001

How to Rewrite the Firmware

1. Click PM Wr/Rd (from BTLD_Test folder)

Page 6 of 8

PSB.2010.01.001

Page 7 of 8

PSB.2010.01.001

2. Then select DSP_code.hex

3. And click Open button to start the Download.

4. Progress bar will display. The firmware update takes about a minute to process the

firmware update. When the following message is displayed, click OK. This completes

the firmware update.

5. To confirm the firmware version, please follow the instructions listed below.

How to confirm firmware version number.

1. Click the “Get Version” button.

Three sets of numbers will display -Confirm that “13” is displayed in the center

of the figures as show in the blue circle. “13” indicates the updated firmware

version.

7. The download process has been completed.

8. To close the downloader window, click the Xin the upper-right corner of

the screen

Then press the PWR button on the front side of the audio control board to

set the AP-60 to Standby mode

Disconnect the Power Cable

Disconnect the RS-232 cable

Reinstall the audio control board and secure the panel with two screws

Page 8 of 8

PSB.2010.01.001

Otros manuales para AP-60 - Projector Sound Solution

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Proyector de Epson

Epson

Epson EX5200 Manual de usuario

Epson

Epson V11H177020 - Powerlite 76C LCD Projector Guía de referencia

Epson

Epson EB-E01 Manual de usuario

Epson

Epson MovieMate 30s Manual de usuario

Epson

Epson LS500WATV Hoja de especificaciones

Epson

Epson PowerLite 6100 Manual de usuario

Epson

Epson EMP-5500 Manual de usuario

Epson

Epson BrightLink 475Wi Manual de usuario

Epson

Epson Megaplex MG-50 Hoja de especificaciones

Epson

Epson PowerLite 505c Manual de usuario

Epson

Epson BrightLink 475Wi Guía

Epson

Epson PowerLite S5 Series Guía de referencia

Epson

Epson 7800p - PowerLite XGA LCD Projector Hoja de especificaciones

Epson

Epson Pro EX1000 Hoja de especificaciones

Epson

Epson EH-LS500W Manual de usuario

Epson

Epson EB-945 Instrucciones de instalación

Epson

Epson 1735W - PowerLite WXGA LCD Projector Manual de usuario

Epson

Epson PowerLite Pro Z8000WUNL Manual de usuario

Epson

Epson PowerLite 8000i Manual de usuario

Epson

Epson EMP-82 Guía de referencia

Epson

Epson BrightLink 425Wi Manual de usuario

Epson

Epson EB-1830 Manual de usuario

Epson

Epson EB-L615U Manual de usuario

Epson

Epson Dreamio EH-TW3800 Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario

Asus

Asus ZenBeam Latte Manual de usuario

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Manual de usuario

JVC

JVC 1108TTH-AO-AO Manual de usuario