Epson EPL-N2120 Manual de usuario
Where to Find Information
Setup Guide (this manual)
Contains information on how to place the printer, assembling the
printer and installing the printer driver.
Online guides
The CD-ROM shipped with your printer includes
the following online guides as well as the printer
driver.
Microsoft Internet Explorer 4.0 or later, or
Netscape Navigator 4.0 or later, must be installed
in your computer to read the Online Guide.
Reference Guide
❏How to use the printer
❏How to solve the problems
❏How to keep your printer in good condition
❏Safety information and technical specifications
Online Help for each printer software
Click Help for detailed information and instructions on the
printer software that controls your printer. Online Help is
automatically installed when you install the printer software.
Laser Printer
®
Setup Guide
SafetyInstructions..................... 1
1 RemovingtheProtectiveMaterials .....6
2 FindingaPlaceforthePrinter..........8
3 AssemblingthePrinter ...............10
4 InstallingtheOptions ................13
5 Testing and Connecting the Printer . . . . 24
6 InstallingthePrinterSoftware..........27
ii
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, mechanical, photocopying, recording,
or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No
patent liability is assumed with respect to the use of the information contained herein. Neither
is any liability assumed for damages resulting from the use of the information contained
herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of
this product or third parties for damages, losses, costs, or expenses incurred by purchaser or
third parties as a result of: accident, misuse, or abuse of this product or unauthorized
modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly
comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.
SEIKO EPSON CORPORATION and its affiliates shall not be liable against any damages or
problems arising from the use of any options or any consumable products other than those
designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON
CORPORATION.
EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P 2 is a trademark
of SEIKO EPSON CORPORATION.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2001 by SEIKO EPSON CORPORATION, Nagano, Japan.
Warnings, Cautions, and Notes
wWarnings must be followed carefully to avoid bodily injury.
cCautions must be observed to avoid damage to your
equipment.
Notes contain important information and useful tips on the
operation of your printer.
Safety Instructions 1
Safety Instructions
Laser Printer Precautions
This printer uses laser technology. Follow the precautions below
carefully to ensure safe, efficient operation.
❏Be careful not to touch the fuser,
which is marked CAUTION!
HIGH TEMPERATURE.Ifthe
printer has been in use, the fuser
can be very hot.
❏Do not attempt to modify or take
the imaging cartridge apart. It
cannot be refilled.
❏Do not touch the toner and avoid
all toner contact with your eyes.
❏Do not dispose of used imaging
cartridges in fire, as they can
explode and cause injury.
Dispose of them according to local regulations.
Important Safety Instructions
Read all of these instructions before operating your printer:
❏Follow all warnings and instructions marked on the printer.
❏Unplug this printer from the wall outlet before cleaning.
Use a damp cloth for cleaning and do not use liquid or aerosol
cleaners.
❏Avoid touching the components inside the printer unless
instructed to do so in this guide.
CAUTION! HIGH TEMPERATURE
2Safety Instructions
❏Never force printer components into place. Although the printer
is designed to be sturdy, rough handling can damage it.
❏Be sure to keep consumables out of the reach of children.
❏Do not leave jammed paper inside of the printer. This can cause
the printer to overheat.
❏Do not use this printer near water.
❏Do not place the printer on an unstable surface.
❏Do not put your printer where the cord will be stepped on.
❏Avoid using outlets that other appliances are plugged into.
❏Slots and openings in the cabinet and the back or bottom are
provided for ventilation. Do not block or cover them.
❏Do not put the printer on a bed, sofa, rug, or other similar surface
or in a built-in installation unless proper ventilation is provided.
❏Usethetypeofpowersourceindicatedonthelabel.Ifyouare
not sure of the type of power available, consult your dealer or
local power company.
❏If you are unable to insert the plug into the outlet, contact a
qualified electrician.
❏If you use an extension cord, make sure that the total of the
ampere ratings on the products plugged into the extension cord
does not exceed the extension cord ampere rating.
❏Never push objects of any kind through cabinet slots as they may
touch dangerous voltage points or short out parts that could
result in a fire or electric shock.
❏Never spill liquid of any kind on the printer.
Safety Instructions 3
❏Except as specifically explained in this guide, do not attempt to
service this product yourself. Opening or removing those covers
that are marked Do Not Remove may expose you to dangerous
voltage points or other risks. Refer all servicing in those
compartments to service personnel.
❏Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result
in damage and may require a qualified service representative to
restore the product normal operation.
❏Unplug this printer from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into it.
C. If it has been exposed to rain or water.
D. If it does not operate normally when the operating
instructions are followed. Adjust only those controls that are
covered by the operating instructions. Improper adjustment
of other controls may result in damage and may require a
qualified service representative to restore the product to
normal operation.
E. If it has been dropped or the cabinet has been damaged.
F. If it exhibits a distinct change in performance, indicating a
need for service.
4Safety Instructions
Safety Information
Laser safety labels
wWarning:
Theuseofcontrols,ortheperformanceofproceduresand
adjustments other than those specified in this guide may result in
hazardous radiation exposure.
YourprinterisaClass1laser
product as defined in the IEC60825
specifications. The label shown
below is attached in countries where
required.
Internal laser radiation
This is a Class IIIb Laser Diode
Assembly that has an invisible laser
beam. The printer head unit is NOT
A SERVICE ITEM, Therefore, the
printer head unit should not be
opened under any circumstances.
An additional laser warning label is
affixed to the inside of the printer.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the
printing process. Ozone is produced only when the printer is
printing.
Max. Radiation Power 0.31 mW
Wave Length 770 to 795 nm
Safety Instructions 5
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million
(ppm) expressed as an average time-weighted concentration over an
eight (8) hour period.
The EPSON EPL-N2120 laser printer generates less than 0.1 ppm for
8 hours of continuous printing.
Minimize the risk
Tominimizetheriskofexposuretoozone,youshouldavoidthe
following conditions:
❏Useofmultiplelaserprintersinaconfinedarea(seeabove)
❏Operation in conditions of extremely low humidity
❏Poor room ventilation
❏Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat
generated are:
❏Not blown directly into the user’sface
❏Vented directly out of the building whenever possible
6Removing the Protective Materials
1Removing the Protective
Materials
Before installing the imaging cartridge and the paper cassette, you
must first remove the protective materials from the printer.
Follow these steps to remove the printer’s protective materials:
1
2
3
Removing the Protective Materials 7
4
5
6
Tabla de contenidos
Otros manuales de Impresora de Epson
Epson
Epson Stylus C44 Actualización de firmware
Epson
Epson Stylus SX235W Guía del usuario
Epson
Epson J7100 - TM Two-color Inkjet Printer Manual de usuario
Epson
Epson 2200 - Stylus Photo Color Inkjet Printer Dimensiones
Epson
Epson TM-T88V-DT Guía de inicio rápido
Epson
Epson ET-M3180 Series Manual de usuario
Epson
Epson Stylus 800 Series Manual de usuario
Epson
Epson Stylus C80N Instrucciones de funcionamiento y seguridad
Epson
Epson Stylus C65 Manual de usuario
Epson
Epson C31CA85090 Guía de seguridad
Epson
Epson Stylus COLOR 900G Manual de usuario
Epson
Epson XP-8600 Series Manual de usuario
Epson
Epson TM-T88VI-DT2 Manual de uso y cuidado
Epson
Epson WorkForce EC-4040 Manual de usuario
Epson
Epson STYLUS PHOTO R350 Manual de usuario
Epson
Epson ActionLaser 1100 Manual de usuario
Epson
Epson Stylus C110 Manual de usuario
Epson
Epson PLQ-20 Manual de usuario
Epson
Epson LX-1170 Manual de usuario
Epson
Epson TM-C710 Manual de uso y cuidado
