Epson S5U13U00P00C100 Manual de usuario

Revision 1.0

S5U13U00P00C100 USB 2.0 Adapter

Board User Manual

Document Number: I00Z-G-018-01

Status: Revision 1.0

Issue Date: 2007/03/20

Information in this document is subject to change without notice. You may download and use this document, but only for your own use in

evaluating Seiko Epson/EPSON products. You may not modify the document. Epson Research and Development, Inc. disclaims any

representation that the contents of this document are accurate or current. The Programs/Technologies described in this document may contain

material protected under U.S. and/or International Patent laws.

EPSON is a registered trademark of Seiko Epson Corporation. All other trademarks are the property of their respective owners.

Page 2 Epson Research and Development

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

I00Z-G-018-01 Issue Date: 2007/03/20

Revision 1.0

Epson Research and Development Page 3

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

Issue Date: 2007/03/20 I00Z-G-018-01

Revision 1.0

Table of Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

3.1 USB driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4 Technical Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4.1 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4.2 Host Bus Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4.3 Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

5 Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

6 Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

7 PCB Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

8 Sales and Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

8.1 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Page 4 Epson Research and Development

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

I00Z-G-018-01 Issue Date: 2007/03/20

Revision 1.0

Epson Research and Development Page 5

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

Issue Date: 2007/03/20 I00Z-G-018-01

Revision 1.0

1 Introduction

This manual describes the setup and operation of the S5U13U00P00C100 USB2.0 Adapter

Board. This board was designed as an evaluation interface for connecting Epson LCD

Controllers Evaluation Boards to a computer using USB connection.

This user manual is updated as appropriate. Please check the Epson Research and Devel-

opment Website at www.erd.epson.com for the latest revision of this document before

beginning any development.

We appreciate your comments on our documentation. Please contact us via email at

documentati[email protected]n.com.

Page 6 Epson Research and Development

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

I00Z-G-018-01 Issue Date: 2007/03/20

Revision 1.0

2 Features

The S5U13U00P00C100 USB2.0 Adapter Board includes the following features:

• Header Signals for connecting Epson LCD Controllers Evaluation Boards

• 5V input power (separate power input, not from USB)

• 3.3V power supply available for Epson LCD Controllers Evaluation Boards

• LED power indicator

• Bidirectional voltage translation buffers for the host bus signals, to interface to wide

range of host bus voltages

Epson Research and Development Page 7

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

Issue Date: 2007/03/20 I00Z-G-018-01

Revision 1.0

3 Installation

S5U13U00P00C100 board should be connected to the Epson LCD Controllers evaluation

board before applying power. To connect the boards, align sockets P1 and P2 on

S5U13U00P00C100 board with headers P1 and P2 on the Epson LCD Controllers evalu-

ation board and connect the two boards.

After the boards are connected, 5V power may be connected to S5U13U00P00C100. Once

the power is applied, the USB cable from the PC may be connected to S5U13U00P00C100

board.

3.1 USB driver

S5U13U00P00C100 USB Adapter board needs the Epson USB driver, S1D13XXXUSB,

installed on the host computer.

The driver may be installed prior to connecting the S5U13U00P00C100 board to the USB

or at the time of the first connection, when the Windows will detect new hardware and will

prompt to install the driver.

Note

If the board does not work after USB cable is connected, remove the USB cable, remove

the power and then connect the power back and reconnect the USB cable.

Page 8 Epson Research and Development

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

I00Z-G-018-01 Issue Date: 2007/03/20

Revision 1.0

4 Technical Description

4.1 Power

S5U13U00P00C100 does not uses power from the USB. The boards need an external 5V

power supply. The power supply should be able to supply a current up to 2A at 5V.

The external power supply may be connected to PWR1 power jack. This is regular power

jack, with a 2.1mm diameter center pin. The positive of the power supply must be on the

center terminal.

S5U13U00P00C100 has internal voltage regulator to generate all the internal voltages and

also the 3.3V power available for the Epson LCD Controllers evaluation board. The 3.3V

power is available on pin 5 of P2 socket.

4.2 Host Bus Power

S5U13U00P00C100 has voltage translation buffers for the host bus. The voltage of the host

bus may be provided by the Epson LCD Controllers evaluation boards, through pin 11 of

connector P1, or it may be provided by the 3.3V voltage regulator on S5U13U00P00C100.

The host bus voltage is selected with JP1 jumper.

JP1 - Host Bus Voltage

JP1 selects the voltage level of the host bus on connectors P1 and P2.

When the jumper is at position 1-2, the voltage level is HIOVDD provided by the Epson

LCD Controllers evaluation boards (recommended setting).

When the jumper is at position 2-3, the voltage level is +3.3V.

Epson Research and Development Page 9

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

Issue Date: 2007/03/20 I00Z-G-018-01

Revision 1.0

Figure 4-1: Jumper JP1 Location

4.3 Status Indicators

S5U13U00P00C100 has a green LED “5V PWR” to indicate when 5V power is present.

The board outputs 2 signals on connector P1 to indicate if the board is working and if the

board has completed enumeration on USB.These signals are 3.3 volt, regardless of the host

bus voltage selection.

On pin 9 of connector P1 is output the signal ‘Heartbeat’. When the board is working

correctly, this is a toggling signal with a frequency around 2Hz. If a LED is used as an

indicator, it will be blinking.

On pin 10 of connector P2 is output the signal ‘Enumerated’. This signal goes high when

the S5U13U00P00C100 enumerated successfully on the USB. If a LED is used as an

indicator, it will turn on upon successful enumeration on the USB.

Page 10 Epson Research and Development

Vancouver Design Center

S5U13U00P00C100 USB 2.0 Adapter Board User Manual

I00Z-G-018-01 Issue Date: 2007/03/20

Revision 1.0

5 Parts List

Table 5-1:

Item Quantity Reference Part PCB

Footprint Notes

159

C1,C4,C5,C7,C8,C9,

C10,C11,C12,C13,C28,

C32,C33,C36,C37,C40,

C41,C44,C45,C48,C49,

C52,C53,C56,C57,C60,

C61,C102,C103,C104,

C105,C106,C107,C108,

C109,C110,C111,C157,

C158,C159,C160,C161,

C162,C163,C164,C165,

C166,C172,C173,C174,

C175,C176,C180,C185,

C186,C196,C197,C200,

C205

0.1uF C0402 Yageo America

04022F104Z7B20D

C2,C3,C178,C179,C194,

C195 10uF 16V T C3528 Kemet

T494B106K016AS

365

C6,C14,C15,C16,C17,

C18,C19,C20,C29,C30,

C31,C34,C35,C38,C39,

C42,C43,C46,C47,C50,

C51,C54,C55,C58,C59,

C82,C83,C84,C85,C86,

C87,C88,C89,C90,C91,

C92,C93,C94,C95,C96,

C97,C98,C99,C100,

C101,C137,C138,C139,

C140,C141,C142,C143,

C144,C145,C146,C147,

C148,C149,C150,C151,

C152,C153,C154,C155,

C156

0.01uF C0402 Panasonic - ECG

PCC103BQCT

451

C21,C22,C23,C24,C25,

C26,C27,C62,C63,C64,

C65,C66,C67,C68,C69,

C70,C71,C72,C73,C74,

C75,C76,C77,C78,C79,

C80,C81,C117,C118,

C119,C120,C121,C122,

C123,C124,C125,C126,

C127,C128,C129,C130,

C131,C132,C133,C134,

C135,C136,C177,C189,

C193,C201

1nF C0402 Yageo America

04022R102K9B20D

510

C112,C113,C114,C115,

C116,C167,C168,C169,

C170,C171

1uF C0402 Panasonic - ECG

ECJ-0EB0J105M

6 2 C181,C199 4.7uF 10V T C3528 Kemet

T491B475K010AS

Otros manuales para S5U13U00P00C100

Tabla de contenidos

Otros manuales de Adaptador de Epson

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario