ePropulsion Evo Dual Manual de usuario
Evo Dual Remote Control User Manual
2021.04 Version 1.0
Copyright © 2021 ePropulsion All Rights Reserved
English
1
English
Acknowledgement
Thanks for choosing ePropulsion products, your trust and support in our company are
sincerely appreciated. We are dedicated to providing high-performance products and
accessories.
Welcome to visit www.epropulsion.com and contact us if you have any concerns.
Using This Manual
Before use of the product, please read this user manual thoroughly to understand the
correct and safe operations. By using this product, you hereby agree that you have
fully read and understood all contents of this manual. ePropulsion accepts no liability
for any damage or injury caused by operations that contradict this manual.
Due to ongoing optimization of our products, ePropulsion reserves the rights of
constantly adjusting the contents described in the manual. ePropulsion also reserves
the intellectual property rights and industrial property rights including copyrights,
patents, logos and designs, etc.
This manual is subject to update without prior notice, please visit our website
www.epropulsion.com for the latest version. If you find any discrepancy between your
products and this manual, or should you have any doubts concerning the product or
the manual, please visit www.epropulsion.com.
ePropulsion reserves the rights of final interpretation of this manual.
This manual is multilingual, in case of any discrepancy in the interpretation of
different language versions, the English version shall prevail.
Symbols
The following symbols will help to acquire some key information.
Important instructions or warnings
Useful information or tips
2
Product Identification
Below picture indicates the serial numbers of Evo Dual Remote Control. Please note
the position of the serial numbers and record them for access to warranty service and
other after-sale services.
Figure 0-1
Figure 0-2
Model: Dual Remote Control
PORT
STBD
DISPLAY
Serial No.: DDRC1K90001
48V RS485
Serial No：
Model： Evo Display Panel
3
English
Table of content
Acknowledgement..................................................................................... 1
Using This Manual..................................................................................... 1
Symbols .................................................................................................... 1
Product Identification ................................................................................ 2
1 Product Overview ................................................................................... 4
1.1 In the Package ........................................................................................ 4
1.2 Specification............................................................................................ 5
1.3 Important Notes ...................................................................................... 5
1.4 Declaration............................................................................................... 6
2 Mounting................................................................................................ 7
2.1 Mounting the Throttle.............................................................................. 7
2.2 Connecting the Throttle .......................................................................... 7
2.3 Button Description................................................................................... 8
2.4 Calibration................................................................................................ 9
3 Display Panel........................................................................................ 11
3.1 Mounting the Display Panel.................................................................. 11
3.2 Display Panel ......................................................................................... 12
3.3 Dock Power Limited Setting ................................................................. 15
3.4 Preference Settings............................................................................... 17
3.5 Battery Configuration............................................................................ 19
4 Use of Kill Switch.................................................................................. 24
5 Warranty .............................................................................................. 25
5.1 Warranty Policies................................................................................... 25
5.2 Out of Warranty...................................................................................... 26
5.3 Warranty Claim Procedures.................................................................. 26
4
1 Product Overview
The Evo Dual Remote Control is used for starting and stopping the outboard motor,
adjusting the speed of the motor, configuring the battery parameters, displaying the
system information and messages, etc. The Evo Dual Remote Control is powered by
connecting to the outboard with a communication cable. When using the Evo Dual
Remote Control, it requires an additional steering wheel to help steer.
1.1 In the Package
When you receive a set of Evo Dual Remote Control, unpack its package and check
if all the items below are included in the package. If there is any loss or transport
damage, please contact your dealer immediately.
Items Qty./Unit Figure
Evo Dual Re-
mote Control
( Remote Main
Part)
1 set
Evo Display
Panel 1 piece
User Manual,
Warranty Card
& Invitation
Card
1 set
Warranty Fixing Guide
Kill Switch 2 pieces
Communicati-
on Cable 0.5m
5
English
1.2 Specification
Evo Dual Remote Control
Weight 2.6 kg / 5.7 lbs
Display 4.3"Independent Display
Communication Wired
Communication Distance ≤ 15 m
Dimensions 151.8 x 178 x 159.4 mm (Remote Main Part)
138.5 x 106.9 x 42.5 mm (Display)
1.3 Important Notes
1. Check the status of the Evo Dual Remote Control and battery level before each
trip.
2. Only adults who have fully read and understood this manual are allowed to
operate this product.
3. Make sure the Evo Dual Remote Control is properly installed before use.
4. Be familiar with the basic operation of this product before use, including start-up,
stop, control mode, and emergency stop.
5. Make sure that the function of this product is normal before each use.
6. Stop the motor immediately if someone falls overboard during the trip.
6
1.4 Declaration
Object of the declaration:
Product Description: Evo Dual Remote Control
Model: Evo Dual Remote Control
Company Name: Guangdong ePropulsion Technology Limited
Company Address: Room 201, Bldg.17A, 4th XinZhu Road, SongShan Lake District,
Dongguan City, Guangdong Province, China
The object of the declaration is in conformity with the following directives:
EMC-directive 2014/30/EU
Applied standards:
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
This device complies with part 15 of the FCC Rules: Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference and,
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Signature:
Shizheng Tao, Chief Executive Officer & Cofounder of
Guangdong ePropulsion Technology Limited
7
English
2 Mounting
2.1 Mounting the Throttle
Follow the fixing guide to fix the throttle of the Evo Dual Remote Control to the boat.
Figure 2-1
2.2 Connecting the Throttle
Please refer the label on the bottom of the Evo Dual Remote Control to connect
with the machine and the Evo Display Panel. The starboard side machine should be
connected with the STBD connector by a communication cable, and use right side
throttle to control it. The port side machine should be connected with the PORT
connector by a communication cable. The Evo Display Panel should be connected
with the DISPLAY connector.
Figure 2-2
Model: Dual Remote Control
PORT
STBD
DISPLAY
Serial No.:
8
Figure 2-3
2.3 Button Description
Button Function
Power button
1.After connecting the dual remote control properly, power on
the outboard. Long press the power button, beep means the
dual remote control is turned on successfully.
2.When the dual remote control is turned on, long press the
power button, beep means the dual remote control is turned
off successfully.
NORM
Normal mode
1.When the dual remote control is turned on, press the NORM
button, beep once means it is switched to normal mode wi-
thout power limited.
2.When the dual remote control is in the normal mode, long
press NORM button for 5 seconds, beep once means it enters
the calibration mode.
CAN-IN CAN-OUTMOTOR
CAN-IN CAN-OUTMOTOR
Remote
Switch
Communication
Terminator
Dual
Remote
Control
Display
Panel
Otros manuales para Evo Dual
1
Tabla de contenidos
Otros manuales de Mando a distancia de ePropulsion
