ePropulsion E Series Manual de usuario
E-Series Battery User Manual
2022.10 V1.5
Copyright © 2020-2022 ePropulsion. All Rights Reserved
English
简中
Deutsch
1
English
Acknowledgement
Thanks for choosing ePropulsion products, your trust and support in our company
are sincerely appreciated. We are dedicated to providing high-performance, reliable
lithium batteries and accessories.
Welcome to visit www.epropulsion.com and contact us if you have any concerns.
Using this manual
Before the use of this product, please read this reference manual thoroughly to un-
derstand the correct and safe operations. By using this product, you hereby agree
that you have fully read and understood all the contents of this manual. ePropulsion
accepts no liability for any damage or injury caused by operations that contradict this
manual.
Due to the ongoing optimization of our products, ePropulsion reserves the rights of
constantly adjusting the contents described in the manual. ePropulsion also reserves
the intellectual property rights and industrial property rights including copyrights, pat-
ents, logos and designs, etc.
This manual is subject to update without prior notice. Please visit our website www.
epropulsion.com for the latest version. If you find any discrepancy between your
products and this manual, or should you have any doubts concerning the product or
the manual, please visit www.epropulsion.com.
ePropulsion reserves the right of nal interpretation of this manual.
This manual is multilingual, in case of any discrepancy in the interpretation of differ-
ent language versions, the English version shall prevail.
Symbols
The following symbols will help to acquire some key information.
Important instructions or warnings
Useful information or tips
2
Product Identification
Below gure indicates the position of the product label on which the serial number
is located. Please record the serial number for access to maintenance or other af-
ter-sale services.
Figure 0-1
3
English
Table of Contents
Acknowledgement..................................................................................... 1
Using this manual...................................................................................... 1
Symbols .................................................................................................... 1
Product Identification................................................................................ 2
1 Product Overview ................................................................................... 5
1.1 In the Package......................................................................................... 5
1.2 Parts and Diagram................................................................................... 6
1.3 Specifications.......................................................................................... 7
1.4 Instructions before Use........................................................................... 8
1.5 Important Instructions ............................................................................ 8
1.6 Declaration of Conformity..................................................................... 10
2 Operation.............................................................................................. 11
2.1 Check the Battery Status ...................................................................... 11
2.2 Using the Battery ................................................................................... 11
2.2.1 Connecting the Battery to the Machine...................................... 11
2.2.2 Turning on/off the Battery........................................................... 13
2.2.3 Charging the Battery.................................................................... 14
2.3 Using Multiple Batteries........................................................................ 16
2.3.1 Connecting Batteries in Parallel.................................................. 16
2.3.2 Connecting Parallel Batteries to the Machine............................ 18
2.3.3 Turning on/off the Batteries in Parallel ...................................... 19
2.3.4 Charging the Batteries in Parallel ............................................... 20
2.4 LED Indicator ......................................................................................... 21
2.5 Buzzer .................................................................................................... 22
3 Troubleshooting ................................................................................... 23
4 Transportation and Storage .................................................................. 24
4.1 Transportation ....................................................................................... 24
4.2 Storage................................................................................................... 25
5 Routine Maintenance............................................................................ 26
6 Warranty .............................................................................................. 27
4
Out of Warranty ........................................................................................... 28
Limited Warranty Claim Procedures........................................................... 28
5
English
1 Product Overview
ePropulsion E-Series Battery is a lithium iron phosphate battery with good safety per-
formance, high energy density, long cycle life and high reliability.
E-Series Battery includes four models, E40, E80 and E175, with a nominal voltage of
51.2V and a capacity of 40Ah, 80Ah and 175Ah.
1.1 In the Package
Save the ePropulsion original package for the battery storage.
Other accessories mentioned in this user manual need to be purchased by users
from ePropulsion authorized dealers.
Unpack the package and check if there is any damage caused during transport.
Check all the items inside the package against the below list. If there is any transport
damage or lack of any listed item, please contact your dealer immediately.
Items Qty./Unit Figure
E-Series
Battery 1 set
Warranty
Card & User
Manual
1 set
Warranty
M8x16 Hex
Screw 2 pieces
6mm Hex
Wrench 1 piece
6
1.2 Parts and Diagram
Figure 1-1
CAN-IN port can be connected with E battery remote switch, E battery communi-
cation terminator or CAN-OUT port.
CAN-OUT port can be connected with the charger or CAN-IN port.
Figure 1-2
Battery positive terminal
Battery level indicator
Valve
Alarm indicator
Running indicator
Power Button
CAN-IN port CAN-OUT port
Motor communication port
Battery negative terminal
Handle
(Detachable)
Protective foam
Protective foam
E40: 390
E80: 440
E175: 565
Unit: mm
25
E40: 207
E80: 212
E175: 277
E40: 190
E80: 195
E175: 260
E40: 420
E80: 555
E175: 500
7
English
1.3 Specifications
E40 E80 E175
Chemistry Lithium iron phosphate battery
Capacity 2048 Wh /
40 Ah
4096 Wh /
80 Ah
8960 Wh /
175 Ah
Rated voltage 51.2V
Final charging voltage 57.6V
Cut-off voltage 41.6V
Maximum charging current 20A 40A 80A
Max continuous
discharging current 40A 80A 150A
Parallel connection Max 16 E-Series Batteries
Serial Connection Not support
Storage temperature -20~60°C
Recommended Charging
Temperature
0°C to 55°C
32˚F to 131˚F
Recommended Discharging
Temperature
-10°C to 45°C
14˚F to 113˚F
Dimensions
42 × 39 × 20.7
cm
16.5 × 15.4 ×
8.2 inches
55.5 × 44 ×
21.2 cm
21.9 × 17.3 ×
8.4 inches
50 × 56.5 ×
27.7 cm
19.7 × 22.2 ×
10.9 inches
Weight 28 kg / 61.7 lbs 53 kg / 116.8
lbs
87 kg / 191.8
lbs
Recommended battery level
during storage 45%~50%
Mounting Position Upright or either long side
8
1.4 Instructions before Use
• Before using the battery, please read the user manual carefully. Only adults who
have fully read and understood this manual are allowed to operate this product.
• Before each use, check if the battery is rmly xed, and check the condition, func-
tionality and connection of the battery.
• Do not remove the protective foam on the battery base. The foam protects the
battery from corrosion and covers xings.
• Avoid battery short-circuit during connection, do not disassemble the battery.
• Do not store the battery in a damp environment.
• During use, keep away from an external heat source and high voltage equipment.
• Do not exposure to shock or excessive vibrations.
• During use, when a fault occurs, please refer to Section 2.4 LED Indicators, Sec-
tion 2.5 Buzzer, and Section 3 Troubleshooting.
• It is not recommended to stack batteries.
• Used batteries should be disposed of according to local laws and regulations.
1.5 Important Instructions
• When the battery is not in use, make sure that the battery's connectors are cov-
ered well with the waterproof caps.
• Never turn on a battery that has a capacitive load. You MUST to add a switch be-
tween the battery and the devices. Insure the battery is switched on before the
insulation switch is turned on. Failure to turn on battery prior to switching on a
load will damage the battery. Always contact your dealer before using an e-se-
ries battery with third products.
• The capacity of the battery is obtained under the relevant standard conditions,
and the actual capacity under different temperatures or charging and discharging
conditions will be different from the nominal capacity.
• E-Series Battery is splash, water, and dust resistant and was tested before delivery
with a rating of IP67. Splash, water, and dust resistance are not permanent condi-
tions and resistance might decrease as a result of normal wear. Liquid damage is
not covered under warranty.
• Do not expose the battery to high temperatures or sparks.
• Do not immerse or splash the battery in water.
• Ensure the battery can never cause a short via jewellery or tools.
Otros manuales para E Series
2
Tabla de contenidos
Idiomas:
Otros manuales de Accesorios para cámaras de ePropulsion
