E+E Elektronik EE8915 Manual de usuario

QUICK GUIDE

EE8915 - CO2Sensor for Railway Applications

Find this document and further product information on our website at www.epluse.com/EE8915.

CONNECTION DIAGRAM

FIX INSTALLED CABLE M12 CONNECTOR

Core number Function

1 10 - 35 V DC supply

2 GND supply

3 GND analogue output

4 Current output

5 Voltage output

Voltage output

Current output

GND analogue output

Power supply 10 - 35 V DC*

GND

M12 device plug

front view

1 2

*The supply circuit must be fused with ≤8A

ERROR INDICATION ON THE ANALOGUE OUTPUT

The EE8915 features an error indication on the analogue output according to NAMUR recommendations (factory setting: disabled).

The feature can be enabled with the EE-PCS Product Configuration Software, see full user guide at www.epluse.com/EE8915.

Output signal NAMUR signal level

0-5 V 5.5 V

0-10 V 11 V

4-20 mA 21 mA

0-20 mA 21 mA

STATUS LEDs

Green LED Red LED

Green LED

flashing = Normal operation

Red LED

off = Normal operation

on = Failure. Contact E+E after sales service.

flashing = Failure. Also indicated on the analogue output (NAMUR indication

enabled). The failure might be temporary, caused for instance by

overheating. If the flashing persists, contact E+E after sales service.

Important note:

» The manufacturer cannot be held responsible for personal injuries or damage to property as a result of incorrect

handling, installation, wiring, power supply and maintenance of the device.

» For failure-free operation and performance according to the specs, the GND supply and the GND analogue output

must be wired separately. Internally, the GNDs are connected to each other on the electronics board.

QG_EE8915 // v1.3 // Modification rights reserved // 194809

E+E Elektronik Ges.m.b.H.

Langwiesen 7 • 4209 Engerwitzdorf • Austria

Tel: +43 7235 605-0 • Fax: +43 7235 605-8

[email protected] • www.epluse.com

LG Linz Fn 165761 t • VAT No. ATU44043101

Place of Jurisdiction: 4020 Linz • DVR0962759

INFORMATION +43 7235 605 0 / inf[email protected]

DIMENSIONS

MODEL T1 (WALL MOUNT) MODEL T2 (DUCT MOUNT 0°) MODEL T27 (DUCT MOUNT 90°)

85 (3.35")

98 (3.86")

48 (1.89")

35 (1.38")

Ø4.5

(0.18")

207.7 or 57.7

(8.18 or 2.27")

Ø12 (0.47")

178.7 or 28.7

(7.04 or 1.30")

39.8 (1.57")

INSTALLATION

WALL MOUNT

Choose a location which minimizes the dust deposits on the filter.

DUCT MOUNT

The arrows on the enclosure indicate the flow direction. When correctly installed, a small

amount of air flows through the divided probe into the EE8915 enclosure, where the CO2

sensing cell is located, and back into the duct.

Very important

For accurate measurement and response time according to specification:

»Minimum air speed in the duct shall be 1 m/s (196 ft/m).

»The air flow shall be perpendicular to the opening holes on the head of probe.

Rubber gasket

Optional mounting flange

Filter

CORRECT INCORRECT

MODEL T2 MODEL T27

8 (0.31")

10 (0.39")

Tabla de contenidos

Otros manuales de Accesorios de E+E Elektronik

E+E Elektronik

E+E Elektronik EE680 Manual de usuario

E+E Elektronik

E+E Elektronik EE210 Manual de usuario

E+E Elektronik

E+E Elektronik EE381 Manual de usuario

E+E Elektronik

E+E Elektronik EE600 Manual de usuario

E+E Elektronik

E+E Elektronik EE211 Manual de usuario

E+E Elektronik

E+E Elektronik EE371 Manual de usuario

E+E Elektronik

E+E Elektronik EE072 Manual de usuario

E+E Elektronik

E+E Elektronik EE75 Manual de usuario

E+E Elektronik

E+E Elektronik EE160 Manual de usuario

E+E Elektronik

E+E Elektronik EE800 Manual de usuario

E+E Elektronik

E+E Elektronik EE100EX Manual de usuario

E+E Elektronik

E+E Elektronik EE300Ex Manual de usuario

E+E Elektronik

E+E Elektronik EE820 Manual de usuario

E+E Elektronik

E+E Elektronik EE211 Manual de usuario

E+E Elektronik

E+E Elektronik EE820 Manual de usuario

E+E Elektronik

E+E Elektronik EE895 Manual de usuario

E+E Elektronik

E+E Elektronik EE33 Manual de usuario

E+E Elektronik

E+E Elektronik EE355 Manual de usuario

E+E Elektronik

E+E Elektronik EE260 Manual de usuario

E+E Elektronik

E+E Elektronik EE895 Manual de usuario

E+E Elektronik

E+E Elektronik EE364 Manual de usuario

E+E Elektronik

E+E Elektronik EE660 Manual de usuario

E+E Elektronik

E+E Elektronik EE240 Manual de usuario

E+E Elektronik

E+E Elektronik EE610 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario