Epilady Epilaser Absolute Manual de usuario

Epilady Epilaser Absolute Hair Removal Laser for Home Use
Model EP-720-04
Instructions for Use

TABLE OF CONTENTS
SAFETY CHART - CHECK IF YOU CAN SAFELY USE THIS LASER
WHERE YOU CAN AND CANNOT USE THIS LASER
INTRODUCTION TO EPILASER ABSOLUTE & LASER HAIR REMOVAL
Congratulations on your new Epilaser Absolute!
How does laser hair removal work?
How long should my hair be?
What does it feel like when I laser a hair?
How long should I treat the area(s) I want to laser?
Read these instructions before using
Who should I contact if I have questions or concerns?
Epilaser has 3 safety features to ensure safe use
EPILADY EPILASER ABSOLUTE INTENDED USE (INDICATIONS)
WHO SHOULD NOT USE THE ABSOLUTE (CONTRAINDICATIONS)
WARNINGS
BENEFITS & RISKS
GETTING TO KNOW YOUR EPILASER ABSOLUTE
1
2
3
3
3
4
4
4
4
4
5
7
8
9
11
13

EPILASER ABSOLUTE TREATMENT OVERVIEW
Before Your First Treatment
Between Treatments
During Your First 3 Months
After 3 Months
SPOT TEST INSTRUCTIONS
CHARGING THE LASER
Charging the Laser
EPILASER ABSOLUTE TREATMENT INSTRUCTIONS
CARING FOR YOUR EPILASER ABSOLUTE
Cleaning the Laser
Recharge Every 3 Months for Long-Term Storage
Recycling/Disposal
TROUBLESHOOTING
LIMITED WARRANTY
TECHNICAL SPECIFICATIONS
TREATMENT JOURNAL
14
14
14
14
14
15
16
16
17
22
22
23
23
24
26
28
29

1
Match your skin tone of the area(s) you wish to treat to the skin tones shown below to determine if you can safely
use this laser. The Epilaser Absolute is intended for use only on Type I (white) to Type IV (light brown) skin tones.
IMPORTANT: DO NOT use the Absolute if your treatment area skin tone matches Type V (medium
brown) or Type VI (dark brown/black). Dark skin may absorb too much laser light, which can injure the skin.
Check your Skin Tone
2
The Epilaser Absolute works best on naturally dark hair (black, dark brown, medium brown, or light brown).
Absolute will operate, but will not be eective on white, gray, blonde, or red body hair.
Check your Hair Color
1
Type I
(White)
Black White Gray Blonde RedDark Brown Medium Brown Light Brown
Type II
(Ivory)
Type III
(Beige)
Type IV
(Light Brown)
Type V
(Medium Brown)
Type VI
(Dark Brown/Black)
NOT SAFE
SAFETY CHART : CHECK IF YOU CAN SAFELY USE THIS LASER

WHERE TO USE THIS LASER
The Epilaser Absolute can be used on the
following areas of the body:
Women’s facial hair (cheeks and below)
Underarms
Hands and feet
Bikini line
Arms and legs*
Back*
2
Eye areas (eyes, eyebrows, and eyelashes)
Ears
Nipples
Genitals
Anus
* NOTE: Absolute works best with small areas of body
hair growth (e.g., face). If used on larger areas (e.g.,
legs) the treatment time will be longer.
WHERE NOT TO USE THIS LASER
Epilaser Absolute is not safe for use on the
following areas of the body:
WHERE YOU CAN AND CANNOT USE THIS LASER

The Epilady Epilaser Absolute gives you long-lasting hair removal results at home, unlike temporary solutions
such as shaving and waxing. The Absolute works in the same way as professional laser hair removal. It treats
the hair follicle, not just the hair, giving you permanent hair reduction after a series of treatments.
Congratulations on your new Epilaser Absolute!
The Absolute emits a pulse of laser light, which heats the dark pigment inside the hair and deactivates the
hair-producing follicle. This is what allows the Absolute to provide permanent results and is why it only works
on naturally dark hair (black, dark brown, medium brown, or light brown). To be most eective, the Absolute
needs to treat each hair follicle during its active growth period. Hair grows in cycles, so multiple treatments
will be necessary.
The main advantage of the Absolute system is that its beam size is only 1 mm² (0.04 inches²), thus only
treating the area in immediate proximity to the hair follicle. This prevents exposing large areas of skin to
unnecessary laser light, allowing you to focus eorts on the actual hairs and not the surrounding skin.
The built-in searchlight illuminates the skin area, allowing you to choose the individual hair you intend to
treat. By placing the Absolute on the skin, treatment is easy and convenient, and best of all, you can treat
your skin in the comfort of your own home whenever you want.
How does laser hair removal work?
3
INTRODUCTION TO EPILASER ABSOLUTE & LASER HAIR REMOVAL

4
Hairs must be visible at the time of treatment (as short as stubble to as long as 2mm (0.08 inches). Do not treat any
hair longer than 2mm (0.08 inches). Any hair too long or thick will burn.
How long should my hair be?
Who should I contact if I have questions or concerns?
The sensation varies, depending on the person and the treatment area. You may feel nothing, or you may experience
a warm, prickling sensation. Some users may experience mild redness that usually goes away within 24 hours.
What does it feel like when I laser a hair?
For best results, treat every 2 weeks for up to 3 months or until you are satised with the amount of hair reduction.
How long should I treat the area(s) I want to laser?
We recommend saving these instructions for future reference. Before you use your new Epilaser Absolute read
this instruction manual to:
Determine if the Absolute is safe for you to use (see page 1).
Learn how to correctly use the Absolute (see pages 17-21).
Review the contraindications (see page 8) and warnings and safety information (see page 9-10).
This Warning Symbol appears next to information about possible safety risks.
Read our Treatment Tips for best results (see page 20).
Read these instructions before using

5
Laser Power Switch - To prevent accidental use the power switch at the bottom of the laser unit must be
turned 1/4 of a turn to turn on the laser.
Skin Contact Sensor - The laser treatment window must be in full contact with the skin in order for the laser
to operate. It will deactivate the laser when not in full contact with the skin.
Skin Tone Sensor - A built-in skin tone sensor will deactivate the laser when used with skin tones that are too
dark and“Not Safe”(Types V and VI, see chart on page 1).
All 3 of these conditions must be met in order for the Absolute to operate.
Epilaser Absolute Safety Features
1
2
3

6
Skin Contact Sensor Power Switch
Skin Tone Sensor
EPILASER ABSOLUTE’S 3 SAFETY FEATURES

7
Epilaser Absolute is an over-the-counter device intended for adjunctive use with shaving for hair removal
sustained with periodic treatments. The Absolute is also intended for permanent reduction in hair regrowth
dened as a long-term, stable reduction in hair counts following a treatment regime. Permanent hair reduction
is dened as long term, stable reduction in the number of hairs regrowing when measured out to 6, 9, and 12
months after the completion of the treatment regimen.
It is intended for use only on light to medium skin tones (see the Skin Tone Safety Chart on page 1) and
naturally dark hair. The Absolute will operate, but will not be eective on white, gray, blonde, or red hair.
EPILASER ABSOLUTE INTENDED USE (INDICATIONS)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de depilación de Epilady



















