Eon RTE-302 Manual de usuario

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

Installation Manual

eOn RTE-302 Biometric Ethernet Enabled Lock

Overview

The RTE-302 is a biometric lock and works in

conjunction with the RTE-MS1A Management System

to provide a unique access control solution. The RTE-

302 supports up to 1,000 users with timed access

control. The RTE-MS1A is a Windowsbased audit

trail and management system and includes a USB

Scanner for finger print enrollment.

The RTE-302 and RTE-MS1A are ideal for any

application including residential, commercial, public

safety, education, healthcare, and government.

The RTE-302 delivers uncompromising commercial-grade quality. This lock is a

true workhorse, tested to over 2 million duty cycles. The RTE-302 has a 3-hour

UL fire-rated latch and a free-wheeling clutch. The outdoor portion is weather-

resistant. The RTE-302 resides on your network via a Power over Ethernet (PoE)

interface using DHCP or static IP addressing. When used with the RTE-MS1A

Management System you can configure all locks on your network and manage all

user information from a central system administrator’s position.

The RTE-302 provides you with the versatility to manage access control using

both fingerprint recognition and PIN codes. The RTE-MS1A access control and

audit trail features track exactly who has been in your facility and when.

Please read all documentation carefully before installation & use. This manual

details all installation procedures.

Manufacturer and/or Distributors of the RTE-302 will not be responsible for any

damages caused by incorrect installation or mishandling of the lock. Any such

damages will void manufacturer’s warranty. Further information on the warranty

terms and conditions can be found on page 37 in this manual.

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

Important: The RTE-302 outside (front) unit has been designed for weather

exposure. Exposure of the inside (back) unit to the elements will void

manufacturer warranty. See Page 37 in this manual for further information under

“Warranty Terms and Conditions”

Features

Up to 1,000 finger print and/or PIN enrollments

Backlit PIN keypad for easy use at night

Industrial Grade Satin Chrome finish

5 second access time before door re-locks

Heavy Duty components rated to over 2 million cycles

UL-Listed, ANSI Grade 2 tubular latch with 3-hour UL fire-rating

Adjustable backset (2 3/8″and 2 3/4″)

Commercial grade 6-pin rim cylinder (removable) with SC4 keyway (3 keys

included)

Free-wheeling clutch design

IP56 rating ensures resistance to moisture, snow, dust, UV, or humidity

Rated for -40°F to 150°F

Impact Alarm

ADA compliant handle is non-handed for right or left hand installation

2 rechargeable 3.2 volt batteries enable continued operation

Timed Unlock Mode Support (“TUMS”) opens and closes lock on pre-defined

schedule

Power over Ethernet

Battery life provides minimum 1,800 openings

Low battery alert

Non-volatile memory not lost when batteries removed or replaced

2 programing modes

- At the lock using the LCD and keypad

- Via the RTE-MS1 Management System

Easy to Delete Individual users

Access Control features:

- Open Mode

- Timed Lock Access

- Timed User Access

- Import Records

- Export Records

2 Year Limited Warranty

May vary based on actual conditions

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

Specifications

Fingerprint sensor - CMOS Optical, 3rd Generation high resolution, backlit,

coated

Verification Type

1 to N (PIN or fingerprint only)

1 to 1 (User ID + FP or PIN)

Scanning Time < 1 second

Recognition Time < 1 second/user

False Accept Rate (FAR) < .001%

False Reject Rate (FRR) < .01%

Power: PoE (802.3af 15w 48v) with two standby 3.2v 280 mAh rechargeable

batteries, optionally powered via 12-volt DC power supply

Dimensions: 1.5" D x 3" W x 9.5" L

Weight: 9 Lbs

Door Thickness: 1 3/8" to 2" compatible with most standard wood, metal or fiber

glass doors: not for use on doors that use exotic woods or glass doors

Rated: -40°F to 150°F

Network connection: 10Mpbs; DHCP or static IP addressing

RTE-MS1A Management System

This Manual describes how to program the RTE-302 manually at each lock. To

take full advantage of the RTE-302 network features you must use the RTE-

MS1A Management System for programming. This software enables you to

program one or more locks on your network from a PC. The RTE-MS1A is sold

separately and has a separate installation manual. Contact your distributor for

more pricing and availability. You can also go to www.actuatorsystems.com for

more information about the RTE-MS1A.

Ethernet Cable Installation

To use the RTE-MS1A the locks must be on your POE network (10Mpbs, DHCP

or static IP addressing). This requires an Ethernet cable be routed from the hinge

side of the door-jam, through the door, to the lock. There are multiple power-

transfer devices and hinges that enable this. These devices are sold separately

by various companies.

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

Contents

Installation Manual ......................................................................................................1

eOn RTE-302 Biometric Ethernet Enabled Lock ............................................................................................1

Overview............................................................................................................................................................................1

Features..............................................................................................................................................................................2

Specifications...................................................................................................................................................................3

RTE-MS1A Management System............................................................................................................................3

Ethernet Cable Installation........................................................................................................................................3

Section 1: Parts ............................................................................................................6

Section 2: Pre-installation ............................................................................................8

2.1 Mark and bore holes on the door ...................................................................................................................8

2.2 Routing/Installing the LAN cable................................................................................................................10

2.3 Setting/Installing the latch and strike plate...........................................................................................13

2.4 Removing handles and re-installing for Right/Left handed configuration.............................14

Section 3: Installation.................................................................................................16

3.1 Impact Alarm Information..............................................................................................................................16

3.2 Installing the Outside Unit..............................................................................................................................17

3.3 Installing the Fixing Plate................................................................................................................................19

3.4 Installing the Inside Unit .................................................................................................................................20

Section 4: Power Options ...........................................................................................24

4.1 Installing the Batteries .....................................................................................................................................24

Section 5. Comm Setting ............................................................................................26

5.1 IP Address Obtained from DHCP Server ..................................................................................................26

5.2 Static IP Address..................................................................................................................................................27

Section 6. Comm Info .................................................................................................30

Section 7: Hard Reset .................................................................................................31

Section 8: Unlocking the RTE-302 ...............................................................................32

8.1 1:N Mode (Enrolled user with an enrolled fingerprint)...................................................................32

8.2 1:N Mode (User with a registered PIN Code) ........................................................................................33

8.3 1:1 Mode with an enrolled fingerprint .....................................................................................................34

8.4 1:1 Mode with a registered PIN Code........................................................................................................35

8.5 With the override keys .....................................................................................................................................36

Section 9. Support Information ..................................................................................37

Appendix A: Lock Programming Instructions ..............................................................39

Section A1: LCD Menu ................................................................................................39

A1.1 Menu Buttons.....................................................................................................................................................40

A1.2 Date/Time............................................................................................................................................................41

A1.3 Sensitivity ............................................................................................................................................................46

A1.4 Match Mode.........................................................................................................................................................47

A1.5 Lock ID...................................................................................................................................................................49

A1.6 Clear FP&PIN......................................................................................................................................................50

A1.7 Access Time.........................................................................................................................................................52

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

A1.7.1 Invalid ................................................................................................................................................................53

A1.7.2 Anytime.............................................................................................................................................................54

A1.7.3 Acc-Time:..........................................................................................................................................................55

A1.8 Weekday...............................................................................................................................................................58

A1.9 Timed TUM..........................................................................................................................................................60

5.9.1 Timed TUM - Setup Menu............................................................................................................................60

A1.9.2 Cancel TUM......................................................................................................................................................61

A1.9.3 Setup Days .......................................................................................................................................................62

A1.9.4 View TUM Settings.......................................................................................................................................66

A1.9.5 Setup Holidays...............................................................................................................................................67

Section A2: Finger Print Management ........................................................................74

Overview:........................................................................................................................................................................74

A2.1 Enrolling Fingerprints ...................................................................................................................................76

A2.2. Add or modify a User PIN............................................................................................................................81

A2.3 Deleting Fingerprints and PINs.................................................................................................................82

A2.4 Access Time.........................................................................................................................................................85

A2.4.1 Example –Access Time for a specific User ID.................................................................................86

Appendix B –User Enrollment Table ..........................................................................93

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

Section 1: Parts

Please familiarize yourself with all the parts in the RTE-302 package. If any parts

are missing or damaged, contact your distributor immediately.

Outdoor Unit

Indoor Unit

Universal Handles

Strike Plate & Box

Rubber Gaskets

Fixing Plate

Over-ride Keys

Tubular Latch

(2 3/8” & 2 3/4”

adjustable)

Spindle (or tailpiece)

Spindle Spring

Installation Template

2 x 2¼” screws (for

bottom fixing posts)

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

2 x 2 1/2” screws

(for fixing plate)

1 x 3” screw (for top fixing

post)

This box intentionally

empty.

Required tools:

One Electric or battery operated Drill

One 3/8” Diameter Drill Bit

A pair of scissors

One Phillips head screwdriver

Hacksaw or handheld bolt cutters

Tape measure

One long, thin shafted Phillips Head Screwdriver

“Fish Tape” for routing LAN cable through door

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

Section 2: Pre-installation

2.1 Mark and bore holes on the door

1) Remove existing handle set.

2) Line up the installation template to the existing hole on the door. Ensure that

the template is square by observing the vertical dotted line which should line up

with the edge of the door. Decide which hole pattern to use (A or B). Mark either

the “A” or “B” holes on the template with a permanent marker. *For this example,

the “B” holes were used.

1 1/8” hole

holes

3/8” holes

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

3) Now that you have the hole pattern marked on the template, use a utility knife

to cut through the template so that you can mark the hole pattern onto the door.

4) Move the template back to the door. Align it again and then mark the holes

onto the door.

eOn RTE-302 Biometric Ethernet Enabled Lock by Actuator Systems

5) The door should look similar to the picture below after the holes are drilled.

2.2 Routing/Installing the LAN cable

Overview:

In order for the RTE-302 to have network functionality; a permanent, wired LAN

connection is required. Doors with a pre-drilled cable channel can be purchased.

However, if the lock is being installed into an existing door, then a channel must

be drilled through the door so that the LAN cable can be connected to the lock.

This cable will then route through the hinge side of the door and back to a

network switch.

In addition to the cable installation, a special door hinge will be required to allow

the LAN connection cable to pass through. An example of this type of hinge is

the McKinney Concealed Circuit Hinge seen below.

Tabla de contenidos

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario