3
Calibrate
Click the Calibrate button to calibrate the unit. Calibration will be
documented in the DataLog.
Read Test
Clicking the Read Test button begins the strip-scanning process.
EnviroLogix test kits must be run according to their Product Inserts and
placed correctly into the strip tray before activating Read Test.
Clean Test
The Clean Test utility starts a procedure to help determine whether dust
or debris has entered the scanning area, potentially affecting test results.
(See Cleaning and Servicing below.) Performance of the Clean Test will
be documented in the DataLog.
DataLog
The DataLog button allows quick access to the DataLog, a depository of
all test results. DataLog files can be edited, viewed, saved, printed, or
deleted by choosing the appropriate utility within the DataLog Viewer.
Select rows can be saved, printed, or deleted. Also, pdf Reports can be
created, viewed and printed. (For more about the DataLog, see p.16.)
To view a Report, highlight a row from the desired report and click
the “View Report” button. (See "Print Report" below for more details.)
To print a Report, highlight a row from the desired report and click
the “Print” button. A dialog window will ask if you wish to print
DataLog rows or pdf Reports. (To set up a printer, see the next
section.)
To make edits, click the box where the change is to be made and edit
the content. Only columns in white (entry fields) are editable; gray
columns cannot be edited. To save edits, click the “Save Edits” button.
To save the DataLog as an Excel®-usable file, click the “Save as .csv”
button to select file location and name. The existing DataLog in the
QuickScan program will continue to accumulate data unless deleted,
in which case a new DataLog will begin.
To save only select rows, highlight the rows to be saved and click
“Save as .scsv” button. To open a .scsv file with Excel, simply change
the extension name from .scsv to .csv.
To create a new or revised pdf report, save desired edits in the
DataLog, click a cell in the section from which you wish to generate a
report, then click “Create Report.” A new report will be generated
containing all rows of data from the same scan. New reports will not
contain strip images. Original reports will continue to exist with the
images.
