Enterasys SSR-ARE Manual de usuario

Este manual sirve para los siguientes modelos

1

Otros manuales de Hardware de red de Enterasys

Enterasys

Enterasys RoamAbout RBTBH-R2W Manual de usuario

Enterasys

Enterasys Matrix E5 5H152-50 Manual de usuario

Enterasys

Enterasys TRMIM-10R Manual

Enterasys

Enterasys X-Pedition XSR-3150 Guía de referencia

Enterasys

Enterasys ER16-SERC-04-AA Manual de usuario

Enterasys

Enterasys X-Pedition 2000 Manual de usuario

Enterasys

Enterasys SSR-ATM29-02 Manual de usuario

Enterasys

Enterasys Enterasys Gold Distributed Forwarding Engine... Manual

Enterasys

Enterasys Enterasys Diamond Distributed Forwarding Engine... Manual

Enterasys

Enterasys Matrix 7GR4202-30 Manual

Enterasys

Enterasys VHSIM2-A6DP Manual de usuario

Enterasys

Enterasys Matrix 7G4270-12 Manual

Enterasys

Enterasys 5G1XX Manual de usuario

Enterasys

Enterasys GPIM-02 Manual de usuario

Enterasys

Enterasys GPIM-08 Manual de usuario

Enterasys

Enterasys Matrix 7G4205-72 Manual

Enterasys

Enterasys WPIM Manual

Enterasys

Enterasys 5H102-48 Manual de usuario

Enterasys

Enterasys RBT-8500 RoamAbout Manual de usuario

Enterasys

Enterasys 802.11 Manual de usuario

Enterasys

Enterasys 6H302-48 Manual de usuario

Enterasys

Enterasys X-Pedition 1805 Manual de usuario

Enterasys

Enterasys BRIM-F0 Manual de usuario

Enterasys

Enterasys 6E2xx Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Xpedition SSR-ARE Installation Guide

Equipment Checklist

After unpacking the SSR-ARE, check the contents of the box to insure

you’ve received the following items:

• One SSR-ARE line card

Handling the Module

CAUTION!

The SSR-ARE can easily be damaged by electrostatic discharge. To prevent

electrostatic damage, observe the following guidelines:

• Do not remove the module from its packaging until you are ready to

install it.

• Do not touch any of the module’s pins, connectors or components.

• Hold the module only by its edges or front panel.

• Wear an anti-static wristband connected to a suitable earth ground

whenever handling the module.

• Store or transport this module only in appropriate anti-static

packaging.

Installing the SSR-ARE

CAUTION!

The SSR-ARE line card is designed for the Xpedition 8000 (SSR-8) or 8600

(SSR-16) only.Do not try to install these modules in any other units. For the

Xpedition 8000, the SSR-ARE can be installed in any slot except 0 or 1. The

SSR-ARE can be installed in any Xpedition 8600 slot except 0, 1 or 15. To

install the module, use the following the instructions.

PLEASE NOTE:

The SSR-ARE can be hotswapped into the Xpedtion 8000/8600 or installed

with the power off.

1. Loosen the screws on the installed module or slot faceplate:

Using your fingers (or a phillips screwdriver), turn the screws used to

secure the module (or faceplate) to the chassis in a counter-clockwise

direction until they are free of the chassis.

2. Remove the installed module or faceplate:

Pull firmly on the screws until the module is free of the chassis. Carefully

slide the module straight out of the slot. If you should remove the module,

install the original faceplate to prevent dust and debris from entering the

unit and to maintain proper air flow.

3. Insert the SSR-ARE into the Xpedition chassis:

Holding the new module with the text on the front panel upright, carefully

slide the module into the slot and press gently until it snaps into place. Be

sure the new module’s face plate is flush with the front panel.

4. Secure the new module:

Secure the Xpedition SSR-ARE module in place by turning the attached

screws clockwise into the chassis. Finger tighten.

9033676