QT-10 Industrial / Air Master Quincy Compressor
50314-200, October 2008 2 3501 Wismann Lane, Quincy IL - 62305-3116
Package Part No. Description
Barrel 112541D032 55 gal., SAE 10W
Pail 112541P032 5 gal., SAE 10W
Gallon 112541G032 1 gal., SAE 10W
Gallon Case 112541X032 (4)-1 gal., SAE 10W
Quart 112541Q032 1 qt., SAE 10W
Quart Case 112541C032 (12)-1 qt., SAE 10W
Barrel 112542D068 55 gal., SAE 20
Pail 112542P068 5 gal., SAE 20
Gallon 112542G068 1 gal., SAE 20
Gallon Case 112542X068 (4)-1 gal., SAE 20
Quart 112542Q068 1 qt., SAE 20
Quart Case 112542C068 (12)-1 qt., SAE 20
Barrel 112543D100 55 gal., SAE 30
Pail 112543P100 5 gal., SAE 30
Gallon 112543G100 1 gal., SAE 30
Gallon Case 112543X100 (4)-1 gal., SAE 30
Quart 112543Q100 1 qt., SAE 30
Quart Case 112543C100 (12)-1 qt., SAE 30
ORDERING
REPLACEMENT PARTS
Prompt service can be rendered on repair parts orders
if the following information is given:
Item 1) the model number, record of change num-
ber, & serial number.
Item 2) the exact part number needed. (Do not
order by item numbers.)
Item 3) the exact quantity needed.
Item 4) the preferred type of transportation.
QUIN-CIP LUBRICANT
Refer to the chart below to order Quin-Cip compres-
sor oil from your local authorized Quincy distributor.
CRANKCASE LUBRICANT
CAPACITY
Model Capacity
QT-10 2.5 qts. (2.37 litres)
SERIAL NUMBER
IDENTIFICATION
The unit serial number identification tag is located on
the air tank top plate. The basic compressor serial
number decal is located on the side of the crankcase
opposite the oil fill side. Fill in the numbers from your
compressor unit and basic compressor in the corre-
sponding spaces provided here, and reference this
page when ordering replacement parts.
All replacement parts are to be ordered through an
authorized Quincy distributor. Insist on genuine
Quincy parts only! Failure to do so may void war-
ranty.
Unit Serial Number
Basic Serial Number
DANGER !
WARNING !
CAUTION !
CAUTION !
Refer to the QT & PLT Industrial / Air Master Series instruc-
tion manual for vital lubrication information.
Follow all safety precautions outlined in the QT & PLT
Industrial / Air Master Series instruction manual.
Do not operate this compressor without a totally enclosed
belt guard or any other required safety equipment.
Air used for breathing or food processing must meet OSHA
1910.134orFDA 21CFR178.3570 regulations. Failure todo
so may cause severe injury or death.
