HCS-D User Manual
10
OPERATION
NOTE:
discussed in this manual; we recommend contacting
Enphase, Inc., as some units are not yet available.
The HCS-D EVSE is a compact wall or pedestal-mounted EVSE
that provides the Plug-in Hybrid or Battery Electric Vehicle
manageable link between the power grid and the PEV.
Simply unwrap the SAE J1772 charge cable and plug the connector
the EVSE makes 100% of its power available to that vehicle.
vehicle completes its charge, the other vehicle has access to 100%
of the power until it completes charging, is unplugged, or another
vehicle that requests power is connected to the HCS-D. The status
of each connected vehicle is displayed on the front panel of the
HCS-D.
Normally, the vehicle will immediately request a charge once the
charging cycle will begin. After an average driving day the vehicle
battery pack will require several hours to recharge completely.
Charging overnight is the most convenient way to maintain healthy
batteries and ensure the vehicle’s full range will be available for
the next day.
press and hold down the latch release lever on the connector
unplug the connector from the vehicle charge port.
