ENPC EP-PI11 Manual de usuario
EP-PI11
Motherboard of
Pentium with MMX
User’s Manual
Order Number 41010012
January 1998
User Manual Rev 1.0
Related Motherboard: EP-PI11 P.C.B. Rev 1.X
Date: Jan. 199
i
Chapter 1 INTRODUCTION
T BLE OF CONTENTS
Chapter 1.............................................................................................1
1-1 About this Manual……..................................................................1
1-2 Item Checklist…………................................................................2
1-3 Specifications………….................................................................3
Chapter 2.............................................................................................5
2-1 Motherboard Description...............................................................5
2-2 Motherboard Layout……..............................................................6
2-3 System Memories……….........................................................…..7
2-4 Central Processing Unit (CPU)......................................................9
2-5 Expansion Cards & Slots..............................................................10
2-6 External Connectors…….............................................................11
2-7 Hardware Jumper/Switch Setup...................................................23
PEENDIX What is the AGP (Accelerated Graphics Port ) ?...............29
PEENDIX B FCC & DOC Declation Of Conformity.......................30
PEENDIX C CE Declation Of Conformity......................................31
EP-PI11 User’s Manual
11
Chapter 1 INTRODUCTION
1-1 bout this Manual
This manual is arranged to help you set up and run this Motherboard
of Pentium with MMX as soon as possible.
The information is presented in the following two chapters:
Chapter 1 Introduction:
Presents what you should receive with your
motherboard, the features and specifications
of the product. This chapter enclosed with a
diagram showing the layout of the
motherboard.
Chapter 2 Installation:
Motherboard Installation includes detailed
information on how to install and configure
the motherboard.
EP-PI11 User’s Manual
2
Chapter 1 INTRODUCTION
1-2 Item Checklist
This product comes with the following components:
Motherboard x 1
40-pin IDE Connector Flat Cable x 1
34-pin Floppy Disk Drive Flat Cable x 1
Bracket with 25-pin serial port and PS/2 Mouse ribbon cable x 1
User’s Manual x 1
Bracket with Com Port and Printer Port Flat cable x 1
Bus Master IDE/Ultra DMA-33 Drivers Diskette x 1 (Option)
IrDA Module x 1 (Option)
LDCM Diskette x 1 (Option)
USB Connector Cable with bracket x 1 (Option)
Option : Components will be included upon
customer ordering instructions per
Proforma Invoice & additional external
procurement cost will be included.
EP-PI11 User’s Manual
11
Chapter 1 INTRODUCTION
1-3 Specifications
Processor: ZIF socket 7 support intel® Pentium
MMX™; intel® P54C, P55C Series,
Cyrix 6x 6/M2 Series, and AMD K5/K6
Series. Supports current and future CPUs.
(Cyrix 6x86 linear burst support)
Chipset: VIA VT 2C59 AT North Bridge for Pentium
VIA VT 2C5 6B South Bridge with ACPI
Power Management
BIOS: Award BIOS With Flash ROM, support PnP,
PCI 2.1, CD-ROM, ATAPI, LS-120, and any
IDE Device Bootable, Virus Protection, DMI
Ready
System Memory: Two 72-pin SIMMs
and two 16 -pin DIMM Slots supports.
The system supports mixed memory
technologies: Extended Data Out (EDO)
RAM, Fast Page (FP) DRAM, and
SDRAM (Synchronous DRAM)
Multi-I/O Onboard:
1 x FDD Port support up to 2. MB
1 x Parallel Port (LPT) support ECP/EPP
2 x High Speed Serial (16C550 UART) Ports
2 x Universal Serial Bus (USB) Ports
1 x AT Keyboard Port
1 x PS/2 Mouse Port
1 x IrDA Infrared Interfaces
EP-PI11 User’s Manual
4
Chapter 1 INTRODUCTION
PCI Bus Master IDE: PCI Enhanced IDE Interface with 4 IDE
Devices
Support HDD Auto-Detect
Support up to PIO Mode 4, DMA Mode 2
Support UltraDMA-33 extensions
Support ATAPI compliant device include
DVD devices
Fully compatible with PCI Local Bus
Specifications V2.1
I/O Connector: 2 x USB Ports, 1 x AT Keyboard Port,
1 x PS/2 Mouse Port, 1 x Parallel Port,
2 x Serial Port
Expansion Slots: 3 x 16-bit ISA Slots with 100% ISA
Compatible Functions
3 x 32-bit PCI Slots supporting PCI BUS
Master Slots Conform with PCI
Specifications Version 2.1
1 x AGP Slot supported.
Options: 1 x Infrared (IrDA) Wireless Interface Kit
1 x Universal Serial Bus (USB) Connector
Kit
Extended Features: Advanced Configuration and Power
Interface (ACPI) ready
Support Win95 Soft-Off (For ATX Power
only)
Support “Programmable OnNow / Security
Wake-Up” feature
Support SM-Bus
Dimension: 220 mm x 230 mm
Form Factor: Baby AT Form Factor
EP-PI11 User’s Manual
11
Chapter 2 INST LL TION
2-1 Motherboard Description
The motherboard is designed with the VIA VT 2C597AT PCI chipset
which is developed by VIA Corporation to fully support the
Pentium Processor PCI/ISA system. The VIA VT 2C597AT PCI
chipset provides increased integration and improved performance
designs. The chipset provides an integrated IDE controller with two
high performance IDE interfaces for up to four IDE devices (hard
devices, CD-ROM device, etc). The Super I/O controller provides the
standard PC I/O function: floppy interface, two 16-Byte FIFO serial
ports and EPP/ECP capable parallel port.
Care must be taken when inserting memory modules, inserting CPU
or even plugging PCI card into associated slots to avoid damaging any
circuits or sockets on board. A cooling fan is strongly recommended.
The motherboard supports minimum of MB of system memory and a
maximum 1GB RAM.
The motherboard supports standard Fast Page (FP), EDO (Extended
Data Output), or SDRAM (Synchronous DRAM). The motherboard
provides two 16 -pin DIMM.
The board also supports onboard two PCI IDE connectors, and detects
the IDE hard disk type by the BIOS utility which is automatic. The
system also supports Award Plug & Play BIOS for the ISA and PCI
cards.
EP-PI11 User’s Manual
6
Chapter 2 INST LL TION
2.2 Motherboard Layout
EP-PI11 User’s Manual
Modem/LAN
Wake Up
ISA
USB
Connector
HCLK
Select
DIMM2
DIMM1
SIMM2
SIMM1
ATX Power Conn.
AT Power Conn.
LPT
Front
Panel
Connector
BIOS
Flash ROM
VPP Select
COMS
Clear
Connector
K/B
Power On
Select
AT
Keyboard
IDE2
IDE1
COM1
COM2
Rear
IrDA
PS/2
Mouse
AGP
CPU
Vcore
Selector
CPU
PCI
Fan
CO
nne
ctor
Freq
Ratio
Select
FDD
11
Chapter 2 INST LL TION
2-3 System Memories
This motherboard supports two 72-pin Single Inline Memory
Modules (SIMM) of 4MB, MB, 16MB, 32MB, and/or 64MB to
form a memory size between MB to 256MB. The DRAM can be
either 60ns or 70ns Fast Page Mode (FPM, Asymmetric or
Symmetric), Extended Data Output (EDO). SIMMs must be installed
in pairs so that each bank contains two of the same size and same
model memory modules.
This motherboard also supports two Dual Inline Memory
Modules (DIMM’S), The Dual Inline Memory Module (DIMM) must
be 3.3 Volt Unbuffered Synchronous DRAM (SDRAM) or Exteded
Data Output (EDO) DRAM of either 16, 32, 64, or 12 MB to form a
memory size between 16MB to 256MB.
Note :
1. Install memory in any combination as next page :
2. Do not mixed use SIMM and DIMM
EP-PI11 User’s Manual
Chapter 2 INST LL TION
Item Bank Memory Module
1 DIMM 1 16~12 MB
2 DIMM 1, 2 16~12 MB
3 DIMM 1, 2
SIMM 1, 2
16~12 MB
~64 MB
EP-PI11 User’s Manual
DIMM 1
DIMM 2
SIMM 1,
2
DIMM 1
Tabla de contenidos
Otros manuales de Placa madre de ENPC
ENPC
ENPC EP-MZ21 Manual de usuario
ENPC
ENPC EP-PT22 Manual de usuario
ENPC
ENPC EP-KL21 Manual de usuario
ENPC
ENPC EP-PT21 Manual de usuario
ENPC
ENPC KB22 Manual de usuario
ENPC
ENPC EP-PS21 Manual de usuario
ENPC
ENPC EP-KB11 Manual de usuario
ENPC
ENPC EP-KL11 Manual de usuario
ENPC
ENPC EP-PT11 Manual de usuario
ENPC
ENPC EP-KE23 Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
