Enovation Controls MURPHY PowerView PV1100 Manual de usuario
00-02-1020
2018-07-16
Section 78
PowerView®
Model PV1100
Installation Manual
In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at enovationcontrols.com.
Please read the following information before installing.
BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:
Read and follow all installation instructions.
Please contact Enovation Controls immediately if you have any
questions.
Table of Contents
Hardware Installation.................................................................................................................1
Inspecting Package Contents.......................................................................................1
Dash-Mounted Installation............................................................................................1
Mounting Bracket .........................................................................................................3
Wiring Information .....................................................................................................................5
Pin Out Specifications ..................................................................................................5
Configuration Information ........................................................................................................8
Wiring Schematics – Black Connector (Valid for all non-connected wiring) .................9
Wiring Schematics – Gray Connector (Valid for all non-connected wiring) ................10
Specifications ...........................................................................................................................11
Dimensions ...............................................................................................................................13
THIS PAGE INTENTIONALLY LEFT BLANK
Section 78 00-02-1020
2018-07-16 - 1 -
Hardware Installation
The following instructions will guide you through installing the PowerView display.
Inspecting Package Contents
Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:
•PV1100 unit
•Installation manual web reference insert
Dash-Mounted Installation
Installation kit (sold separately) – P/N 78-00-1277 includes:
•Bracket
•Panel Seal
•(4) 8-32 machine screws
Section 78 00-02-1020
2018-07-16 - 2 -
Tools needed.
•Drill with 7/32 in. size bit
•Jigsaw
Preparing the Dash
Determine the location of the PV1100 in the dash. Cut a hole in the dash to these dimensions:
(For actual cutout template, see support.enovationcontrols.com, then search for PV1100)
•(recessed mounting): 10.45” x 6.79” (265.61mm x 172.61mm)
•(surface mounting): 7.28” x 2.56” (185mm x 65mm)
Section 78 00-02-1020
2018-07-16 - 3 -
Mounting the Unit
1. Place the back side of the display through the opening in the dash.
2. Use the four included screws from the mounting kit (78-00-1277) to attach the unit to the
bracket and torque to 10 inch-pounds.
Mounting Bracket
Section 78 00-02-1020
2018-07-16 - 4 -
How to Order
The following PV1100 displays and accessories are available through Enovation Controls:
Part Number
Description
Order Details
78700636 PV1100, Touch, Non-connected, Landscape Display
78700654 PV1100, Touch, Non-connected, Portrait Display
78090098 Programming Kit, PV780/PV1100
Accessories
78001277 Kit, Mounting Bracket, PV1100
78001055 Harness, Gray Connector, USB
78001056 Harness, Gray Connector, Flying Leads
78001057 Harness, Black Connector, Flying Leads
78001017 Harness, Black Connector, Development
78001018 Harness, Gray Connector, Development
78090069 Harness, PV750/PV1100 Conversion, Power/CAN
Section 78 00-02-1020
2018-07-16 - 5 -
Wiring Information
Pin Out Specifications
Black Connector
1 Digital Input 1
2 Analog Input 3
3 Analog Input 2
4 Analog Input 1
5 CAN1 Low
6 CAN1 High
7 Battery
8 Ground
9 Analog Input 3 Ground
10 Analog Input 2 Ground
11 Analog Input 1 Ground
12 Digital Input 3
13 Digital Input 2
14 Frequency Output 1
15 Ignition Input
16 No Connect
17 No Connect
18 CAN2 Low
19 CAN2 High
20 Digital Input 4
21 Digital Input 5
22 Digital Output
23 Frequency Output 2
Section 78 00-02-1020
2018-07-16 - 6 -
Gray Connector
1 Video Input 1 NTSC/PAL
2 Video Input 2 NTSC/PAL
3 Video Input 3 NTSC/PAL
4 RS-485 High
5 RS-485 Low
6 LINE_OUT_1_R Negative Audio Out -
Right
7 LINE_OUT_1_R Positive Audio Out - Right
8 LINE_OUT_1_L Negative Audio Out - Left
9 Video Input 1 Ground
10 Video Input 2 Ground
11 Video Input 3 Ground
12 No Connect
13 Frequency Input
14 Frequency Return
15 No Connect AUDIO OUT - LEFT
16 USB D-White (Data -)
17 USB D+ Green (Data +)
18 USB 5V Red (+5V)
19 USB Ground Black
20 USB Shield
21 No Connect
22 No Connect
23 No Connect
Tabla de contenidos
Otros manuales de Monitor de Enovation Controls
Enovation Controls
Enovation Controls Murphy PowerView PV485 Manual de usuario
Enovation Controls
Enovation Controls Murphy PowerView PV101-C Manual de usuario
Enovation Controls
Enovation Controls Murphy PowerView PV485 Manual de usuario
Enovation Controls
Enovation Controls MURPHY PowerView PV500 Manual de usuario
Enovation Controls
Enovation Controls Murphy PowerView PV485 Manual de usuario
Enovation Controls
Enovation Controls MURPHY PowerView PV380-R3 Manual de usuario
Enovation Controls
Enovation Controls MURPHY PowerView Manual de usuario
