1
Contents
.
2
Features/ Technical Specifications
.............................................................
3
Troubleshooting / OSD MENU Operation
..............................................................
4~8
Key/ Remote Instruction
9
Wiring Diagram .............................................................................................
10
.
Bracket Installation ..................................................................................
Contents/Preface .............................................................................................. 1
Preface
To ensure long-term trouble-free service of the products, please read this manual
carefully before using the product.
Notes:
1. Do not try to open the covers. It is a high precision product. Please close the
power in time if anomalies.
2. Do not use organic solvent clear the covers, to avoid it peel off painting.
3. Do not enforce to the lead wire., to avoid damage or poor connect.
4. Protect the product from fall down and shock.
5. Please wiring as diagram strictly, if wiring wrong will lead product can’t work
and even damage vehicle electrical system.
6. Do not use any affect operation of driving.
7. Do not let the product working at higher or lower than the suitable temperature
of machine.
Copyright protection:
This manual is the intellectual property of our company.
In order to continuously improve the products,
We reserve the right to change the specifications without prior notice.
10
Bracket Installation
1. U-Bracket Installation
1) Use the screw fixed the U-bracket. Put the monitor into
the bracket, adjust angle and locking it.
2) Finished the installation. Adjust the angle forward 30°to backward 30°.
User can adjust a suitable angle by oneself.
2. Plastic/Metal Bracket Installation
1) Firstly fixed the bracket via the screws, the screws of the top need lock to
nut of under.
2) Secondly put the metal buckle piece on the top of the fan-shaped bracket
into the notch at the back of the monitor.
3) Move the bracket to the proper
location.
4) Screw down the nut of bracket,
until the monitor fastening.
.............................................
