F SERIES
Address: Electro Industries/GaugeTech
Division of E. I. Electronics, Inc.
1800 Shames Drive Westbury, New York 11590 U. S. A
For Customer or Technical Assistance, Repair and Calibration:
Customer Support & Repair Service
Customer support is available 9:00 A.M. to 4:30 P.M., Eastern Time, Monday through Friday. Please have the
model, serial number and a detailed problem description available. If the problem concerns a particular
reading, please have all meter readings available. When returning any merchandise to E.I.G., an RMA (Return
Materials Authorization) number is required.
PRODUCT
WARRANTY:
Electro Industries/GaugeTech warrants this product to be free from defects in material
and workmanship for a period of 1 year from date of shipment. During the warranty
period, we will, at our option, either repair or replace any product that proves to be
defective.
To exercise this warranty, fax or call our customer service department. You will receive
prompt assistance and return instructions. Send the instrument, transportation prepaid, to
the address above. Repairs will be made and the instrument will be returned.
LIMITATION
OF
WARRANTY:
This warranty does not apply to defects resulting from unauthorized modification,
misuse, or use for any reason other than electrical power monitoring. This unit is
not to be used for primary over current protection. Any protection feature in this
unit is to be used for alarm or secondary protection only.
This warranty is in lieu of all other warranties, expressed or implied, including any
implied warranty of merchantability or fitness for a particular purpose. Electro
Industries/GaugeTech shall not be liable for any indirect, special or consequential
damages arising from any authorized or unauthorized use of any Electro Industries /
GaugeTech product.
STATEMENT
OF
CALIBRATION:
This instrument has been inspected and tested in accordance with specifications published
by Electro Industries/GaugeTech. The accuracy and calibration of this instrument are
traceable to the National Bureau of Standards through equipment which is calibrated at
planned intervals by comparison to certified standards.
DISCLAIMER:
Information presented in this publication has been carefully checked for reliability;
however, no responsibility is assumed for inaccuracies. The information contained in this
document is subject to change without notice.
COPYRIGHT:
No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying, recording, or information
storage or retrieval systems or any future forms of duplication, for any purpose
other than the purchaser's use, without the expressed written permission of Electro
Industries/GaugeTech, a division of E.I. Electronics, Inc.
Copyright (C) 2017Electro Industries/GaugeTech, Division of E. I. Electronics, Inc. All rights reserved.
Printed in the United States of America.
