Energenie PMS-LAN Manual de usuario

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

1. Introduction

Congratulations on your purchase of the Power Management

System LAN & Surge Protector. Your PMS-LAN is an advanced

surge protector with power management features. Four sockets

are individually manageable by the computer via the LAN interface.

The sockets can be switched on/off by a timer schedule, by

direct user control or by programmable events. It is also possible to

pre-program the unit event timer schedule (hardware schedule)

and then disconnect the PMS-LAN from the managing computer.

The device can be used as an advanced standby-killer.

You can manage your PMS-LAN via the Internet from all over

the world, even from your Smartphone.

1.1. Features

The main rocker switch switches all sockets on and off

Each manageable socket can be switched on and off via the

software control window

PMS-LAN User Manual

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

The unit can be pre-programmed with a timed schedule. The

schedule will operate even when the managing computer is

switched off or disconnected. A typical application could be:

“switch my peripherals on every working day at 8:50 AM”.

The manageable sockets can also be controlled from the

attached computer Power Manager software to react to a

particular event (e.g. Windows or other programs start-

up/shutdown), simple typical applications could be: “switch my

scanner on when I want to scan” or “switch my printer off

whenever I exit Windows”

Real time Voltage monitor provides information about the

actual status of each manageable socket (on or off). This

information can be further utilized in various ways (e.g. to

check the proper execution of the switching commands)

The unit can be assigned a network name as a shared LAN

resource and can be afterwards accessed and managed from

anywhere within the local area network or Internet (provided

the managing computer is switched on)

Surge Protection. Includes resettable circuit breaker.

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

1.2. Specifications

Input voltage: 220–250 VAC, 50-60 Hz

Maximum load: 13A, 3kW

Maximum power consumed by the PMS-LAN: 2.5 W

Built-in power supply

Hardware schedule features:

Maximum number of independent hardware schedule

events –16 per socket

Time interval between the events –from 1 minute to

180 days

Timer accuracy: no more than 2 seconds error per day

providing power is always present. Otherwise there can

be an additional (up to 2 seconds) error per each power

off.

Working temperature range: from +10 to +40 °C

Dimensions: 378 x 98 x 55 mm

Net weight: 1.0 kg

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

1.3. Hardware requirements

Computer running Windows® 2000/XP/Vista or Windows 7

One free USB port

1.4. Package contents

PMS-LAN

User manual

RJ45 LAN patch cable, RJ45 LAN cross over cable

CD with Power Manager software for Windows (use of this

software is not compulsory)

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

2. Indicators and controls of the PMS-LAN

Managed sockets

RJ45 socket

Main rocker switch

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

2.1. Side panels Figure 2

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

2.2. Indicators

Main rocker switch Z (Figure 1 above) is illuminated - the

PMS-LAN is connected to the power supply and active.

Power indicator (Figure 1 above) is illuminated. The non-

manageable sockets (marked with the sign ) are

switched on.

The indicator Socket 1 (2,3,4) (Figure 1 above) is lit. The

particular socket is switched on.

The indicator Schedule/LAN activity (Figure 2 above) blinks

green –there is some LAN activity taking place.

The indicator Schedule/LAN activity (Figure 2 above) blinks

red as the reset procedure is being executed.

The indicator Schedule/LAN activity (Figure 2 above) stays

red if an active hardware schedule for any socket exists.

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

2.3. Controls

Main rocker switch (Z) enables power to be supplied to the

sockets. The two unmanaged sockets will be powered.

Circuit breaker. Pressing this button will reset the circuit breaker

protective device if it has been tripped.

Reset button (A). The PMS-LAN can be restarted if it can’t be

accessed or works abnormally. All the IP settings and device

settings will remain the same as before, but the server time will

become outdated and all schedules will be reset.

Master switch button (B). Switches all the manageable sockets

on and off regardless of their current status or schedule that is

being executed.

IP config button (C). Resets the PMS-LAN to the default IP

settings.

120430

All brands and logos are registered trademarks of their respective owners

POWER MANAGEMENT SYSTEM - LAN

3. Installation

The device is for internal use only. It is strongly recommended

to avoid damp or wet places for installation.

The PMS-LAN should be connected to a standard UK mains

socket.

3.1. Getting started

Connect PMS-LAN to the wall socket first and then to the LAN

socket (or your computer LAN card) with the provided patch

cord or vice-versa.

The PMS-LAN can now be switched on and off by means of the

Main rocker switch (Z).

The first and the last sockets of the PMS-LAN are marked with

the symbol . These two sockets are switched on and off

by means of the Main rocker switch (Z) and cannot be managed

by the computer –so they are termed non-manageable sockets

in this manual.

When the PMS-LAN is switched on, the red POWER indicator

illuminates. In this case both non-manageable sockets are now

live and connected to the power supply.

Tabla de contenidos

Otros manuales de Protector contra sobretensiones de Energenie

Energenie

Energenie SIS-PWM Silver Shield Manual de usuario

Energenie

Energenie EG-PMS2-WLAN Manual de usuario

Energenie

Energenie EG-PMS2 Manual de usuario

Energenie

Energenie EG-PMS-WLAN Manual de usuario

Energenie

Energenie SPG-RM Manual de usuario

Energenie

Energenie SPF5-C-5 Manual de usuario

Energenie

Energenie SIS-PMS-LAN Manual de usuario

Energenie

Energenie EG-PMS Manual de usuario

Energenie

Energenie EG-PMS-LAN Manual de usuario

Energenie

Energenie EG-PMS2-LAN Manual de usuario

Energenie

Energenie SPG5-C-5 Manual de usuario

Manuales populares de Protector contra sobretensiones de otras marcas

ELAC

ELAC ProteK PR91-W Manual de usuario

Tsubaki

Tsubaki TSM4000M1 Manual de usuario

QVS

QVS PP134C Manual de usuario

CyberPower

CyberPower CSP604T Manual de usuario

Davis Instruments

Davis Instruments Radio Surge Protector Manual de usuario

M-system

M-system MGA-100 Manual de usuario

CyberPower

CyberPower CSP706T Manual de usuario

CyberPower

CyberPower B300WRC1 Manual de usuario

M-system

M-system MGD-24 Manual de usuario

Leviton

Leviton 51120-3R Manual de usuario

Panamax

Panamax MAX 5400-EX Manual de usuario

CyberPower

CyberPower B1006T Manual de usuario

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Manual de usuario

Minuteman

Minuteman MMS7120RCT Manual de usuario

Leviton

Leviton 52412-DS3 Manual de usuario

Savio

Savio LZ-07 Manual de usuario

Siemens

Siemens HNM3M120 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Manual de usuario