Eneo 235526 Manual de usuario
AK-26 Quick Installation Guide (EN)
DIMENSION (Unit: mm) SPECIFICATION
PARTS SUPPLIED
PRIOR to USE
Install the mount onto a strong structure such as concrete wall
Use the supplied accessories when installing the mount bracket depends on mounting position
Construction: Aluminum Cast
Environment: Ceiling mount for a Bullet
Dimension(mm): 146.7x46.2mm
Weight: 248g (0.55 lb)
Junction Box
4 x Expansion Bolt
Waterproof Stopper
Stopper for Wire
Screws, Water-proof Rubber
Installation Template
QIG
AK-26 Quick Installation Guide (EN)
INSTALLATION
CEILING MOUNT
1. Locate the mounting template at the installation position and drill the wall.
2. Hammer the 4 expansion screws into the wall holes drilled
3. Route the power and BNC cable through the Box
4. Tight the box to wall through the three screws
5. Insert the box ring to the mounting plate for waterproofing
6. Open the dome cover by loosening screws
7. Connect the power and BNC cable with the camera cables
8. Assemble the vandal proof dome base to the mounting plate using the assembly screws
9. Set the camera’s viewing angle
10. Put the dome cover to the dome unit and tighten screws.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Eneo
Eneo
Eneo DOME-WB1 B Manual de usuario
Eneo
Eneo AK-5 Callisto dome series Manual de usuario
Eneo
Eneo AK-26 Manual de usuario
Eneo
Eneo VHM Series Manual de usuario
Eneo
Eneo AK24 Manual de usuario
Eneo
Eneo VKC-1356/AK Manual de usuario
Eneo
Eneo VTL-W/N2 Manual de usuario
Eneo
Eneo AK-20 Manual de usuario
Eneo
Eneo ESH-10 Manual de usuario
Eneo
Eneo DOME-WB6 Manual de usuario
