Eneo MPC-54A0003M0A Manual de usuario
User Manual
MPC-54A0003M0A
EN
1/2.9” HD Camera,
2560x1440, Day&Night, AF Zoom,
WDR, 3.2~9mm, Indoor
2
Table of content
Parts supplied ....................................................................................................... 5
Part names ............................................................................................................ 6
Operating instructions ......................................................................................... 7
1. ZOOM / FOCUS .................................................................................................................................... 10
2. EXPOSURE .............................................................................................................................................. 13
3. SCENE ENHANCE ................................................................................................................................. 14
4. 3D-NR ...................................................................................................................................................... 16
5. DAY / NIGHT ......................................................................................................................................... 16
6. PICT. ADJUST ....................................................................................................................................... 18
7. SPECIAL .................................................................................................................................................. 19
8. SYSTEM ................................................................................................................................................... 21
9. EXIT .......................................................................................................................................................... 22
Power Supply connections....................................................................................................................... 7
Using OSD Control controller ................................................................................................................ 7
OSD menu table ......................................................................................................................................... 8
OSD Menu Setup ................................................................................................... 10
Further information ............................................................................................. 22
3
EN
Safety instructions
General safety instructions
•
• Keep the operating instructions in a safe place for later use.
• Installation, commissioning and maintenance of the system may only be carried out by authorised
individuals and in accordance with the installation instructions - ensuring that all applicable standards and
guidelines are followed.
• Protect the devices from water penetration and humidity, since these can cause lasting damage.
• Should moisture nevertheless enter the system, under no circumstance switch on the devices under these
conditions, instead send them for examination to an authorised specialist workshop.
•
• The device must be protected from excesses of heat, dust, humidity and vibration.
• When separating the system from the voltage supply, only ever use the plug to pull out the cable. Never
pull directly on the cable itself.
• Lay the connecting cables carefully and check that they are not mechanically stressed, kinked or damaged
and that no humidity can penetrate into them.
• In the event of a malfunction, please inform your supplier.
• Maintenance and repairs may only be carried out by authorised specialist personnel.
• The system must be isolated from the power supply before opening the housing.
•
• Connection cables should always be exchanged through Videor E. Hartig GmbH.
• Use only original spare parts and accessories from Videor E. Hartig GmbH.
• The housing should only be cleaned using a mild domestic cleaning agent. Never use solvents or petrol as
these can permanently damage the surface.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• The installer is responsible for the maintenance of the enclosure as per the technical data, e.g. by sealing
the cable outlets with silicone.
•
• The devices may only be operated in the temperature range indicated in the data sheet and within the
dened air humidity range.
• The camera may never be pointed directly at the Sun with the aperture open (this will destroy the sensor).
• It is unavoidable that during manufacture and to a certain extent during later use, humidity will be present
may condense inside the housing.
• To avoid this condensation inside the very tightly sealed housing, the manufacturer has inserted silica gel
sachets in the housing of the various camera types.
• It is however a physical given, that these silica gel bags will reach saturation after a certain amount of time.
They should therefore be replaced with new silica gel sachets.
• During installation, it is essential to ensure that the seals provided are correctly installed and that they are
not displaced during installation. Damaged seals must not be installed and will invalidate any warranty.
• A multipolar, easily accessible isolation device should be installed in the proximity of the IR Spotlight, in
order to disconnect the device from the power supply for service work.
• The earth connection must be made according to the low impedance requirement of DIN VDE 0100.
• Subsequent painting of the equipment surface can impair the function.
• Any warranty claim is invalidated by subsequent painting.
• A safety margin of > 1m from the spotlight must be maintained when viewing directly into the IR Spotlight
in a darkened environment.
• Do not look directly at invisible LED radiation using optical instruments (e.g. a reading glass, magnifying
glass or microscope), since this can endanger the eyes, LED Class 1M.
• Operation of the IR spotlight with a defective cover or during repair is prohibited.
Before switching on and operating the system, rst read this safety advice and the operating instructions.
The system must never be used outside of the technical specications, since this can destroy it.
The device may only be opened by qualied service personnel. Unauthorised access invalidates any
warranty claim.
Wire end ferrules should be used when shortening the exible connection cables.
Product - Specic Safety Instructions
4
Class A device note
This is a Class A device. This device can cause malfunctions in the living area; in such an event, the operator may
need to take appropriate measures to compensate for these.
WEEE (Waste Electronical & Electronic Equipment)
Correct Disposal of This Product (Applicable in the European Union and other European countries with separate
collection systems).
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate this from other types of wastes
and recycle it responsibly to promote the sustainable reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Graphical symbols
Please pay attention to the safety instructions, and carefully read through this instruction guide before initial
operation.
Important points of warning are marked with a caution symbol.
iImportant points of advice are marked with a notice symbol.
5
EN
Parts supplied
• Box camera
• Operating instructions
6
Part names
CAUTION:
Care should be taken the cable is NOT to be damaged, kinked
or exposed in the hazardous area.
Do not expose the camera directly to a strong light source such
as the sun or spot light.
Rear Case
Front Case
Window
Mount Holes (Top / Bottom)
Extreme care should be taken NOT to scratch the window in
front of lens.
OSD Control Joy stick
Power input terminal (AC24V/DC12V)
RS-485 / IR connector
Video format selection Switch
HD-Analog output connector
Power LED
HD-SDI/EX-SDI output connector
1
2
3
4
5
6
7
④
③
①⑤
⑥
⑦
②
EX-SDI
HD-ANALOG
HD-SDI
CONTROL
POWER
7
EN
Operating instructions
Power Supply connections
Using OSD controller
Camera can work with either 24VAC or 12VDC, dual voltage power. Primary and
secondary grounds are completely isolated to avoid the possible ground-loop
problems.
Setup menu can be accessed and controlled by OSD control joystick on the rear
of the camera unit. Five commands are available with the joystick.
i
i
HD-SDI or EX-SDI is selectable by Video format switch only.
TVI mode or AHD mode is selectable in the menu only. (SYSTEM> ANALOG MODE)
1. SET (●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down.
2. UP/DOWN (▲/▼) : Choose the desired sub-menu and to move the cursor up
or down.
3. LEFT/RIGHT (◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
Description of the OSD control operation
4. ‘ ’ denotes the long press down straightly for about 2 seconds
Description of the Motorized ZOOM&FOCUS adjustment
1. ▲: Zoom In
2. ▼: Zoom Out
3. ◄: Focus Near
4. ►: Focus Far
Works only when OSD Menu is inactive.
HD-SDIEX-SDI
CONTROL HD-ANALOG
POWER
OSD Control Joy Stick
Video format Switch
Operating instructions
8
OSD menu table
MENU SUB Menu Conguration
ZOOM/FOCUS
ZOOM
EXPOSURE
MODE
MODE MODE
ROI MODE
LOW, MIDDLE, HIGH
WEIGHT
WDR
SCENE ENHANCE
ZOOM SPEED
POI ZOOM
PRESET ZOOM
HOME POSITION
RATIO DISP
FOCUS MODE
LENS INIT.
SMART MOTION ZOOM
DOL, FRAME
WINDOW ZONE/USE, H/V-POS, H/V-SIZE
NORMAL
FOCUS
BRIGHTNESS DAY
BRIGHTNESS NIGHT
AGC
SENS-UP
AUTO, IRIS PRIOR, SHUT PRIOR, MANUAL, FLICKERLESS
0~20
0~20
0~10
SLOW, MID, FAST
H/V-POINTER
O-ZOOM RATIO, DURATION
OFF, ON
ZOOM PUSH, AUTO, MANUAL
ZONE NUM, ZONE VIEW, H/V POS, ZOOM RATIO
OFF, x2, x4, x8, x16, x32
ON
3D-NR OFF, LOW, MIDDLE, HIGH
0~10
HLC LEVEL, COLOR
H/V-POS, H/V-SIZE
BLC
PICT. ADJUST
DAY / NIGHT
WHITE BAL.
SHARPNESS
GAMMA
D-WDR
COLOR GAIN DAY
COLOR GAIN NIGHT
EXTERN
AUTO
COLOR
COLOR DN
B&W
SMART IR, ANTI-SAT., DELAY, IR LED CTL
SMART IR, ANTI-SAT., AGC THRES, AGC MARGIN, DELAY
SMART IR, ANTI-SAT.
AUTO, AUTOext, PRESET, MANUAL (C-TEMP, R/B-GAIN)
0~20
0~20
0.45, 0.55, 0.65, 0.75
OFF, LOW, MIDDLE, HIGH
DEFOG
SHADING OFF, ON
MODE, LEVEL
OFF, ON
ZONE NUM, WINDOW USE, MOTION WIN SET, H/V POINTER,
ZOOM RATIO, DURATION, SENSITIVITY
9
EN
SYSTEM
LANGUAGE ENG, CHN(S), CHN, JPN, KOR, GER
RESET ON
EXIT SAVE, CANCEL
MIRROR / FLIP OFF, HV, Hor., Ver.
RESOLUTION
TV SYSTEM
COMM.
ANALOG MODE TVI MODE
AHD MODE
EU(PAL), US(NTSC)
RANGE
FILTER
AUTO-C
OFF, ON
CAM ID, BAUDRATE
UTC TYPE (PELCO-C, HIK-C)
10% ~ 30%
LOW, MIDDLE, HIGH
OFF, HALF, FULL
SPECIAL
OFF, RIGHT UP, LEFT DOWN
PRIVACY
DIS
CAM TITLE
ZONE NUM, ZONE DISP, H/V-POS, H/V-SIZE, MASK COLOR,
TRANSPARENCY
BOX
POLYGON
SDI MODE HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
ZONE NUM, ZONE DISP, POS 0-X/Y, POS 1-X/Y, POS 2-X/Y,
POS 3-X/Y, MASK COLOR, TRANSPARENCY
1440 30P/25P, 1080 30P/25P, 720 30P/25P
iSupported resolution according to Video format.
EX-SDI
1440P (30/25P)
O O O
O O
O
O
O
O O
1080P (30/25P) 720P (30/25P)
HD-SDI
AHD mode
TVI mode
OSD Menu Startup
10
Press the ‘OSD menu SET key’ down to access the setup menu mode.
• RETURN : Returns to the previous menu.
• EXIT : Exits the current menu with SAVE or CANCEL.
MENU V1. XX
1. ZOOM/FOCUS
2. EXPOSURE
3. SCENE ENHANCE
4. 3D-NR
5. DAY/NIGHT
6. PICT. ADJUST
7. SPECIAL
8. SYSTEM
9. EXIT
WDR
MIDDLE
SAVE
EXTERN
1-1. ZOOM
1-1-1. ZOOM SPEED : Set the zoom speed SLOW, MID, FAST
1-1-2. POI ZOOM (Point Of Interest) : ON enables to set the interest area which can
zoom in/out the center area of video image.
1. ZOOM/FOCUS
• H-POINTER : Sets the horizontal location of area to be zoomed by POI ZOOM.
• V-POINTER : Sets the vertical location of area to be zoomed by POI ZOOM.
1. ZOOM/FOCUS
ZOOM
FOCUS
RETURN
ZOOM
ZOOM SPEED
POI ZOOM
PRESET ZOOM
SMART MOTION ZOOM
HOME POSITION
RATIO DISP
RETURN
FAST
ON
ON
OFF
OFF
OFF
• ZONE NUM : Set a number to select a preset zoom from 1 to 4
• ZONE VIEW : ON enables a relevant preset zone.
• H / V -POINTER : Adjust position of preset zone.
• ZOOM RATIO : Set the Optical/Digital Zoom Ratio.
Zoom ratio is automatically culculated according to the location of pointer.
1-1-3. PRESET ZOOM : Able to zoom in for the preset area
Otros manuales para MPC-54A0003M0A
1
Tabla de contenidos
Otros manuales de Videocámara de Eneo
Eneo
Eneo TVB-2080Z10IR Manual de usuario
Eneo
Eneo TVC-2080Z03 Manual de usuario
Eneo
Eneo VKCD-1330-2811 Manual de usuario
Eneo
Eneo MCB-68V2713M0A Manual de usuario
Eneo
Eneo VKC-1330IR12-24 Manual de usuario
Eneo
Eneo TEM-42F0025M0A Manual de usuario
Eneo
Eneo VKC-1350 Manual de usuario
Eneo
Eneo VKC-1319 Manual de usuario
Manuales populares de Videocámara de otras marcas
Panasonic
Panasonic AG-HMC152EN Manual de usuario
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario
MYDLINK
MYDLINK DCS-6100LH Manual de usuario
Sony
Sony video Hi8 Handycam CCD-TR555 Manual de usuario
SECURECOM
SECURECOM V-5014B Manual de usuario
Panasonic
Panasonic HDC-SD100 Manual de usuario
