Endress+Hauser RID14 Especificaciones técnicas

Products Solutions Services

Brief Operating Instructions

RID14

8-channel field indicator

with FOUNDATION Fieldbus™

These Brief Operating Instructions are not a substitute for the

Operating Instructions pertaining to the device.

Detailed information is provided in the Operating Instructions

and other documentation.

Available for all device versions via:

• Internet: www.endress.com/deviceviewer

• Smartphone/tablet: Endress+Hauser Operations app

KA00281R/09/EN/15.22-00

71593373

2022-07-28

RID14

2 Endress+Hauser

Order code:

Ext. ord. cd.:

Ser. no.:

www.endress.com/deviceviewer Endress+Hauser

Operations App

XXXXXXXXXXXX

XXXXX-XXXXXX

XXX.XXXX.XX

Serial number

A0023555

RID14 Table of contents

Endress+Hauser 3

Table of contents

1 About this document .............................................................. 3

1.1 Symbols ............................................................................. 3

2 Safety instructions ................................................................ 5

2.1 Requirements for personnel .............................................................. 5

2.2 Designated use ........................................................................ 6

2.3 Workplace safety ...................................................................... 6

2.4 Operational safety ......................................................................6

2.5 Product safety ......................................................................... 6

3 Identification ..................................................................... 6

3.1 Device designation ..................................................................... 6

3.2 Scope of delivery ....................................................................... 7

3.3 Certificates and approvals ................................................................ 7

4 Installation ....................................................................... 8

4.1 Incoming acceptance, transport, storage ..................................................... 8

4.2 Installation conditions ................................................................... 8

4.3 Installation instructions ..................................................................9

4.4 Post-installation check ................................................................. 11

5 Wiring ........................................................................... 11

5.1 Connecting the cable to the field indicator ................................................... 12

5.2 Connection to FOUNDATION Fieldbus™ ..................................................... 13

5.3 Degree of protection ................................................................... 15

5.4 Post-connection check ..................................................................16

6 Operating the field indicator ..................................................... 16

6.1 Quick operation guide .................................................................. 16

6.2 Display and operating elements ........................................................... 18

6.3 Configuration of the field indicator ........................................................ 19

6.4 Hardware settings ..................................................................... 19

6.5 Device configuration ................................................................... 20

1 About this document

1.1 Symbols

1.1.1 Safety symbols

DANGER

This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in

serious or fatal injury.

WARNING

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

serious or fatal injury.

CAUTION

This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in

minor or medium injury.

About this document RID14

4 Endress+Hauser

NOTICE

This symbol contains information on procedures and other facts which do not result in

personal injury.

1.1.2 Electrical symbols

Symbol Meaning Symbol Meaning

Direct current Alternating current

Direct current and alternating current Ground connection

A grounded terminal which, as far as

the operator is concerned, is grounded

via a grounding system.

Symbol Meaning

Potential equalization connection (PE: protective earth)

Ground terminals that must be connected to ground prior to establishing any other connections.

The ground terminals are located on the interior and exterior of the device:

• Interior ground terminal: potential equalization is connected to the supply network.

• Exterior ground terminal: device is connected to the plant grounding system.

1.1.3 Symbols for certain types of information

Symbol Meaning Symbol Meaning

Permitted

Procedures, processes or actions that

are permitted.

Preferred

Procedures, processes or actions that

are preferred.

Forbidden

Procedures, processes or actions that

are forbidden.

Tip

Indicates additional information.

Reference to documentation

Reference to page

Reference to graphic

… Series of steps

Result of a step Visual inspection

RID14 Safety instructions

Endress+Hauser 5

1.1.4 Symbols in graphics

Symbol Meaning Symbol Meaning

1, 2, 3,... Item numbers

… Series of steps

A, B, C, ... Views A-A, B-B, C-C, ... Sections

Hazardous area

Safe area (non-hazardous area)

1.1.5 Tool symbols

Symbol Meaning

A0011220

Flat blade screwdriver

A0011221

Allen key

A0011222

Open-ended wrench

A0013442

Torx screwdriver

2 Safety instructions

2.1 Requirements for personnel

The personnel must fulfill the following requirements for its tasks:

‣Trained, qualified specialists must have a relevant qualification for this specific function

and task.

‣Are authorized by the plant owner/operator.

‣Are familiar with federal/national regulations.

‣Before starting work, read and understand the instructions in the manual and

supplementary documentation as well as the certificates (depending on the application).

‣Follow instructions and comply with basic conditions.

Identification RID14

6 Endress+Hauser

2.2 Designated use

• The device is a field indicator designed for connection to a fieldbus.

• The device is designed for installation in the field.

• The manufacturer accepts no liability for damages resulting from incorrect use or use other

than that designated.

• Safe operation is only guaranteed if operators comply strictly with the Operating

Instructions.

• Only operate the device in the designated temperature range.

2.3 Workplace safety

For work on and with the device:

‣Wear the required personal protective equipment according to federal/national

regulations.

2.4 Operational safety

Risk of injury.

‣Operate the device in proper technical condition and fail-safe condition only.

‣The operator is responsible for interference-free operation of the device.

2.5 Product safety

This measuring device is designed in accordance with good engineering practice to meet state-

of-the-art safety requirements, has been tested, and left the factory in a condition in which it

is safe to operate.

It meets general safety standards and legal requirements. It also complies with the EC

directives listed in the device-specific EC Declaration of Conformity. Endress+Hauser confirms

this by affixing the CE mark to the device.

3 Identification

3.1 Device designation

3.1.1 Nameplate

The right device?

Compare the order code on the nameplate of the device to that on the delivery papers.

RID14 Identification

Endress+Hauser 7

Made in Germany 2013

D-87484 Nesselwang

Order code: RID14-XXXX/X

Ser. no.: XXXXXXXXXXX

Ext. ord. cd.: RID14-XXXXX

9 - 32 V

Ta = -40 ...+55/70/80°C

FW: 1.00.00-[1...1] DevRev: X

IP66/67 Type 4X

RID14

A0012565

 1 Nameplate of the field indicator (example)

1 Designation, order code and serial number of the device

2 Power supply

3 Ambient temperature range

4 Firmware version and device revision

5 Degree of protection and type of approval

6 Approvals

3.2 Scope of delivery

The scope of delivery of the field indicator comprises:

• Field indicator

• Brief Operating Instructions as hard copy

• ATEX - safety instructions for using a device approved for hazardous areas, optional

• Optional accessories (e.g. pipe mounting bracket), see 'Accessories' section in the Operating

instructions.

3.3 Certificates and approvals

3.3.1 CE mark

The measuring system meets the legal requirements of the applicable EC guidelines. These are

listed in the corresponding EC Declaration of Conformity together with the standards applied.

The manufacturer confirms successful testing of the device by affixing to it the CE mark.

3.3.2 UL approval

UL recognized component (see www.ul.com/database, search for Keyword "E225237")

3.3.3 EAC mark

The product meets the legal requirements of the EEU guidelines. The manufacturer confirms

the successful testing of the product by affixing the EAC mark.

Installation RID14

8 Endress+Hauser

3.3.4 CSA

CSA General Purpose

3.3.5 Certification Foundation Fieldbus™

The field indicator has successfully passed all the tests and is certified and registered by the

Fieldbus Foundation. The device meets all the requirements of the following specifications:

• Certified in accordance with FOUNDATION Fieldbus™ specification

• FOUNDATION Fieldbus™ H1

• Interoperability Test Kit (ITK), revision status 6.1.2 (device certification number available on

request): the device may also be operated using certified devices from other manufacturers

• Physical Layer Conformance Test of the Fieldbus FOUNDATION™ (FF-830 FS 2.0)

3.3.6 Registered trademarks

FOUNDATION Fieldbus™

Registered trademark of the Fieldbus Foundation Austin, Texas, USA

4 Installation

4.1 Incoming acceptance, transport, storage

The permitted ambient and storage conditions must be observed. The precise specifications

can be found in Section "Technical data" in the Operating Instructions.

4.1.1 Incoming acceptance

On receipt of the goods, check the following points:

• Are the packaging or contents damaged?

• Is anything missing from the delivery? Compare the scope of delivery with the information

you specified in the order. See also section "Scope of delivery" →  7.

4.1.2 Transportation and storage

Note the following points:

• Pack the device so that is protected against impact for storage and transportation. The

original packaging provides optimum protection.

• The permitted storage temperature range is –40 to +80 °C (–40 to +176 °F); it is possible to

store the device in the limit temperature ranges for a limited period (maximum 48 hours).

4.2 Installation conditions

The process indicator is designed to be used in the field.

The orientation is determined by the readability of the display.

Operational temperature range:

–40 to +80 °C (–40 to +176 °F)

RID14 Installation

Endress+Hauser 9

NOTICE

Shorter display operating life at higher temperatures

‣Where possible do not operate the device in the higher temperature range.

The display can react slowly at temperatures < –20 °C (–4 °F).

The readability of the display is no longer guaranteed at temperatures < –30 °C (–22 °F).

4.2.1 Dimensions

132 (5.2)

135 (5.3)

112 (4.4)

166 (6.5)

106 (4.2) 121 (4.8)

121 (4.8)

!6.4

(0.25)

A0011152

 2 Dimension of the filed indicator in mm (in)

4.2.2 Installation location

Information on conditions that must be present at the installation location to mount the

device correctly can be found in Section 'Technical data' in the Operating Instructions. These

include the ambient temperature, degree of protection, climate class etc.

4.3 Installation instructions

The device can be mounted directly on the wall →  10. A mounting bracket is available for

mounting on a pipe →  4,  11.

The backlit display can be mounted in 4 different positions →  10.

Installation RID14

10 Endress+Hauser

4.3.1 Turning the display

Pos. 1

90°

90° 90°

Pos. 2 Pos. 3 Pos. 4

A0023724

 3 Field indicator, 4 display positions, can be fitted in 90° stages

The display unit can be turned in 90 ° stages.

1. First remove the cover clamp (1) and the housing cover (2).

2. Then disconnect the display (3) from the electronics unit (4).

3. Turn the display to the desired position and then fit it onto the electronics unit.

4.3.2 Mounting directly on the wall

Proceed as follows to mount the device directly on the wall:

1. Drill 2 holes

2. Fit the device on the wall with 2 screws (⌀5 mm (0.2 in)).

4.3.3 Pipe mounting

The mounting bracket is suitable for pipes with a diameter between 1.5" to 3.3".

The additional mounting plate must be used for pipes with a diameter between 1.5" to 2.2".

The mounting plate is not needed for pipes with a diameter between 2.2" to 3.3".

Proceed as follows to mount the device on a pipe:

Otros manuales para RID14

Tabla de contenidos

Otros manuales de Instrumento de medición de Endress+Hauser

Endress+Hauser

Endress+Hauser Proline Promag 50P Manual

Endress+Hauser

Endress+Hauser Gammapilot FMG50 Manual de usuario

Endress+Hauser

Endress+Hauser Memosens CFS51 Manual de usuario

Endress+Hauser

Endress+Hauser PROline promag 53 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiphant FTL51B Actualización de firmware

Endress+Hauser

Endress+Hauser Proline Prosonic Flow E 100 HART Manual de usuario

Endress+Hauser

Endress+Hauser Micropilot M FMR231 Manual de usuario

Endress+Hauser

Endress+Hauser SmarTec S CLD 132 PROFIBUS-PA Manual de usuario

Endress+Hauser

Endress+Hauser Nivector FTI26 Manual de usuario

Endress+Hauser

Endress+Hauser FQG60 Manual

Endress+Hauser

Endress+Hauser Levelflex M FMP43 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promass F 300 Manual de instrucciones

Endress+Hauser

Endress+Hauser Solimotion FTR20 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiline System CA80TP Especificaciones técnicas

Endress+Hauser

Endress+Hauser Cerabar PMC71B Especificaciones técnicas

Endress+Hauser

Endress+Hauser Memograph M Especificaciones técnicas

Endress+Hauser

Endress+Hauser gammapilot FTG 671 Manual

Endress+Hauser

Endress+Hauser SpectraSensors OXY5500 Manual de usuario

Endress+Hauser

Endress+Hauser Deltapilot S FMB70 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Prosonic Flow93C Guía de aplicación

Endress+Hauser

Endress+Hauser Liquiphant M/S with electronic Insert FEL56 Manual del operador

Endress+Hauser

Endress+Hauser Proline Promass 80 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiline System CA80CR Especificaciones técnicas

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

Acterna

Acterna MS1400 Manual de usuario

R&S

R&S ZPH Manual de usuario