Endress+Hauser RIA16 Especificaciones técnicas
Products Solutions Services
Brief Operating Instructions
RIA16
Loop-powered field indicator
These Brief Operating Instructions are not a substitute for the
Operating Instructions pertaining to the device.
Detailed information is provided in the Operating Instructions
and other documentation.
Available for all device versions via:
• Internet: www.endress.com/deviceviewer
• Smartphone/tablet: Endress+Hauser Operations app
KA00279R/09/EN/05.23-00
71615262
2023-03-01
RIA16
2 Endress+Hauser
Order code:
Ext. ord. cd.:
Ser. no.:
www.endress.com/deviceviewer Endress+Hauser
Operations App
XXXXXXXXXXXX
XXXXX-XXXXXX
XXX.XXXX.XX
Serial number
1.
3.
2.
A0023555
RIA16 Table of contents
Endress+Hauser 3
Table of contents
1 About this document .............................................................. 3
1.1 Symbols ............................................................................. 3
1.2 Documentation ........................................................................ 5
2 Basic safety instructions .......................................................... 6
2.1 Requirements for the personnel ............................................................ 6
2.2 Intended use .......................................................................... 6
2.3 Workplace safety ...................................................................... 6
2.4 Operational safety ......................................................................6
2.5 Product safety ......................................................................... 6
3 Identification ..................................................................... 7
3.1 Nameplate ........................................................................... 7
3.2 Scope of delivery ....................................................................... 7
3.3 Certificates and approvals ................................................................ 7
4 Mounting ......................................................................... 8
4.1 Mounting requirements ................................................................. 8
4.2 Mounting the measuring device ............................................................9
4.3 Post-mounting checks .................................................................. 10
5 Electrical connection ............................................................ 10
5.1 Connecting the device .................................................................. 12
5.2 Ensuring the degree of protection ......................................................... 13
5.3 Post-connection check ..................................................................13
6 Operation options ............................................................... 14
6.1 Overview of operation options ............................................................ 14
6.2 Access to the operating menu via the operating keys ........................................... 14
6.3 Device configuration ................................................................... 16
1 About this document
1.1 Symbols
1.1.1 Safety symbols
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.
About this document RIA16
4 Endress+Hauser
NOTICE
This symbol contains information on procedures and other facts which do not result in
personal injury.
1.1.2 Electrical symbols
Symbol Meaning Symbol Meaning
Direct current Alternating current
Direct current and alternating current Ground connection
A grounded terminal which, as far as
the operator is concerned, is grounded
via a grounding system.
Symbol Meaning
Potential equalization connection (PE: protective earth)
Ground terminals that must be connected to ground prior to establishing any other connections.
The ground terminals are located on the interior and exterior of the device:
• Interior ground terminal: potential equalization is connected to the supply network.
• Exterior ground terminal: device is connected to the plant grounding system.
1.1.3 Symbols for certain types of information
Symbol Meaning Symbol Meaning
Permitted
Procedures, processes or actions that
are permitted.
Preferred
Procedures, processes or actions that
are preferred.
Forbidden
Procedures, processes or actions that
are forbidden.
Tip
Indicates additional information.
Reference to documentation
A
Reference to page
Reference to graphic
1.
,
2.
,
3.
… Series of steps
Result of a step Visual inspection
RIA16 About this document
Endress+Hauser 5
1.1.4 Symbols in graphics
Symbol Meaning Symbol Meaning
1, 2, 3,... Item numbers
1.
,
2.
,
3.
… Series of steps
A, B, C, ... Views A-A, B-B, C-C, ... Sections
-
Hazardous area
.
Safe area (non-hazardous area)
1.2 Documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
•Device Viewer (www.endress.com/deviceviewer): Enter the serial number from the
nameplate
•Endress+Hauser Operations app: Enter serial number from nameplate or scan matrix
code on nameplate.
1.2.1 Document function
The following documentation may be available depending on the version ordered:
Document type Purpose and content of the document
Technical Information (TI) Planning aid for your device
The document contains all the technical data on the device and provides an
overview of the accessories and other products that can be ordered for the
device.
Brief Operating Instructions (KA) Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information from
incoming acceptance to initial commissioning.
Operating Instructions (BA) Your reference document
The Operating Instructions contain all the information that is required in the
various phases of the life cycle of the device: from product identification,
incoming acceptance and storage, to mounting, connection, operation and
commissioning through to troubleshooting, maintenance and disposal.
Description of Device Parameters (GP) Reference for your parameters
The document provides a detailed explanation of each individual parameter.
The description is aimed at those who work with the device over the entire life
cycle and perform specific configurations.
Safety Instructions (XA) Depending on the approval, safety instructions for electrical equipment in
hazardous areas are also supplied with the device. The Safety Instructions are
an integral part of the Operating Instructions.
Information on the Safety Instructions (XA) relevant to the device is
provided on the nameplate.
Supplementary device-dependent
documentation (SD/FY)
Always comply strictly with the instructions in the relevant supplementary
documentation. The supplementary documentation is an integral part of the
device documentation.
Basic safety instructions RIA16
6 Endress+Hauser
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel must fulfill the following requirements for its tasks:
‣Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣Are authorized by the plant owner/operator.
‣Are familiar with federal/national regulations.
‣Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the application).
‣Follow instructions and comply with basic conditions.
2.2 Intended use
• The device is a configurable field indicator with one sensor input.
• It is designed for mounting in the field.
• The manufacturer accepts no liability for damages resulting from improper or non-intended
use.
• Safe operation is only guaranteed if the Operating Instructions are observed.
• Only operate the device in the permitted temperature range.
2.3 Workplace safety
When working on and with the device:
‣Wear the required personal protective equipment as per national regulations.
2.4 Operational safety
Damage to the device!
‣Operate the device in proper technical condition and fail-safe condition only.
‣The operator is responsible for the interference-free operation of the device.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which it
is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EU
directives listed in the device-specific EU Declaration of Conformity. The manufacturer
confirms this by affixing the CE mark to the device.
RIA16 Identification
Endress+Hauser 7
3 Identification
3.1 Nameplate
The correct device?
Compare the order code on the nameplate of the device to the code on the delivery note.
A0011268
1 Nameplate of the field indicator (example)
1 Description, order code, serial number and identification number of the device
2 Degree of protection
3 Power supply and output signal
4 Ambient temperature
5 Approvals
6 Manufacturer name and address
3.2 Scope of delivery
The scope of delivery of the field display unit comprises:
• Field indicator
• Cable shield grounding clamps (only for aluminum housing)
• Hard copy of Brief Operating Instructions
• ATEX safety instructions for use of a device approved for hazardous areas, optional
• Accessories (e.g., pipe mounting bracket), see 'Accessories' section in Operating Instructions
→ BA00280R.
3.3 Certificates and approvals
3.3.1 CE mark
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EC directives. The manufacturer confirms
successful testing of the product by affixing to it the CE-mark.
Mounting RIA16
8 Endress+Hauser
3.3.2 EAC mark
The product meets the legal requirements of the EEU guidelines. The manufacturer confirms
the successful testing of the product by affixing the EAC mark.
3.3.3 UL approval
More information under UL Product iq™, search for keyword "E225237")
4 Mounting
4.1 Mounting requirements
The device is designed for use in the field.
Its orientation is determined by the readability of the display.
Operating temperature range:
• –40 to +80 °C (–40 to +176 °F)
• –20 to +80 °C (–4 to +176 °F) when the Open Collector output is used
Operating the device in the upper temperature limit range reduces the operating life of
the display.
The display may respond slowly at temperatures < –20 °C (–4 °F).
Readability of the display can no longer be guaranteed at temperatures < –30 °C (–22 °F).
Operating altitude Up to 2 000 m (6 561.7 ft) above sea level
Overvoltage category Overvoltage category II
Pollution degree Pollution degree 2
4.1.1 Dimensions
133 (5.24)
199 (7.83)
96 (3.78)
158 (6.22)
1
115 (4.53)
163 (6.42)
A
A
A-A
A0011162
2 Dimensions of the field indicator; dimension in mm (in)
1 Bore hole for mounting directly to wall or optional mounting plate with 4 screws ⌀ 5 mm (0.2 in)
RIA16 Mounting
Endress+Hauser 9
4.1.2 Mounting location
For information on the conditions that must be present at the mounting location before the
device can be mounted correctly (such as ambient temperature, type of protection, climate
class etc.), see the "Technical data" section in the Operating Instructions → BA00280R.
4.2 Mounting the measuring device
The device can either be mounted directly to the wall or mounted to the pipe or wall using the
optional mounting kit.
4.2.1 Direct wall mounting
To mount the indicator directly on the wall:
1. Drill 4 holes (see dimensions, → 2, 8)
2. Attach the device to the wall using 4 screws ⌀5 mm (0.2 in).
4.2.2 Pipe mounting
The mounting bracket is suitable for pipes with a diameter of 25 to 125 mm (1 to 5 in). The
mounting kit comprises a mounting plate (item 1), 2 metal strips (item 2) and 4 screws (item
3), → 3, 9.
To mount the indicator on a pipe:
1
2
1. 2.
A0011269
3 Preparing for mounting
Electrical connection RIA16
10 Endress+Hauser
3mm
3. 4.
3
3
A0011270
4 Attaching the indicator to the mounting plate
4.3 Post-mounting checks
Perform the following checks after mounting the device:
Device condition and specifications Note
Is the measuring device damaged? Visual inspection
Is the seal undamaged? Visual inspection
Is the device firmly screwed to the wall or mounting plate? -
Is the housing cover securely fitted? -
Does the device comply with the measuring point specifications (ambient temperature,
measuring range etc.)?
See "Technical data' section".
5 Electrical connection
NOTICE
Destruction or malfunction of parts of the electronics
‣ ESD - Electrostatic discharge. Protect the terminals from electrostatic discharge.
LCAUTION
Destruction of parts of the electronics
‣Switch off the power supply before installing and connecting the device.
Otros manuales para RIA16
4
Tabla de contenidos
Otros manuales de Instrumento de medición de Endress+Hauser
Endress+Hauser
Endress+Hauser Liquiphant FTL62 Manual de usuario
Endress+Hauser
Endress+Hauser VU101 Manual de usuario
Endress+Hauser
Endress+Hauser RIA14 Especificaciones técnicas
Endress+Hauser
Endress+Hauser Prothermo NMT532 Manual
Endress+Hauser
Endress+Hauser Dosimag Manual de usuario
Endress+Hauser
Endress+Hauser Turbimax CUE21 Manual de usuario
Endress+Hauser
Endress+Hauser Cerabar S PMP72 Manual de usuario
Endress+Hauser
Endress+Hauser Stamosens CSM750 Manual de usuario
Endress+Hauser
Endress+Hauser Micropilot FMR53 Manual
Endress+Hauser
Endress+Hauser Micropilot NMR84 Manual de usuario
Endress+Hauser
Endress+Hauser RID14 Manual de usuario
Endress+Hauser
Endress+Hauser Prothermo NMT81 Manual de usuario
Endress+Hauser
Endress+Hauser EngyCal RH33 Especificaciones técnicas
Endress+Hauser
Endress+Hauser FQG66 Manual de usuario
Endress+Hauser
Endress+Hauser Proline Promag L 400 Manual de usuario
Endress+Hauser
Endress+Hauser RMM621 Especificaciones técnicas
Endress+Hauser
Endress+Hauser Micropilot NMR84 Especificaciones técnicas
Endress+Hauser
Endress+Hauser Micropilot FMR20 Especificaciones técnicas
Endress+Hauser
Endress+Hauser Prosonic M FMU44 Manual de usuario
Endress+Hauser
Endress+Hauser Liquiphant M FTL50 Manual de usuario
