Endress+Hauser CPY7B Manual de usuario

Products Solutions Services

Operating Instructions

CPY7B

Electrolyte vessel

BA00128C/07/EN/14.16

71344205

Table of contents

2 Endress+Hauser

Table of contents

1 Document information ......... 3

1.1 Warnings ........................... 3

1.2 Symbols ............................ 3

2 Basic safety instructions ....... 4

2.1 Requirements for the personnel ........ 4

2.2 Designated use ...................... 4

2.3 Occupational safety .................. 4

2.4 Operational safety ................... 4

2.5 Product safety ....................... 4

3 Incoming acceptance and

product identification .......... 5

3.1 Incoming acceptance ................. 5

3.2 Product identification ................. 5

3.3 Scope of delivery ..................... 6

4 Installation ...................... 6

4.1 Installation conditions ................ 6

4.2 Installing the electrolyte vessel ......... 7

4.3 Post-installation check ................ 8

5 Commissioning ................. 9

5.1 Filling the vessel with electrolyte ....... 9

5.2 Venting ........................... 10

5.3 Assembly .......................... 10

6 Maintenance .................. 11

7 Repairs ......................... 12

7.1 Spare parts ........................ 12

7.2 Return ............................ 12

7.3 Disposal ........................... 13

8 Accessories .................... 13

9 Technical data ................. 13

CPY7B Document information

Endress+Hauser 3

1 Document information

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

Consequences of non-compliance (if

applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

Consequences of non-compliance (if

applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

Basic safety instructions CPY7B

4 Endress+Hauser

2 Basic safety instructions

2.1 Requirements for the personnel

• Installation, commissioning, operation and maintenance must only be carried out by

technical personnel trained to perform these tasks.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults may be repaired only by authorized and specially trained personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

The electrolyte vessel is designed:

• To provide unpressurized or pressurized electrodes with a top-up supply of liquid electrolyte

• To create an electrolyte bridge in measuring devices with reference electrodes.

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

2.3 Occupational safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

2.4 Operational safety

1. Before commissioning the entire measuring point, verify that all connections are

correct. Ensure that electrical cables and hose connections are undamaged.

2. Do not operate damaged products, and safeguard them to ensure that they are not

operated inadvertently. Label the damaged product as defective.

3. If faults cannot be rectified:

Take the products out of operation and safeguard them to ensure that they are not

operated inadvertently.

2.5 Product safety

2.5.1 State of the art

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

CPY7B Incoming acceptance and product identification

Endress+Hauser 5

3 Incoming acceptance and product identification

3.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify your supplier of any damage to the packaging.

Keep the damaged packaging until the matter has been settled.

2. Verify that the contents are undamaged.

 Notify your supplier of any damage to the delivery contents.

Keep the damaged products until the matter has been settled.

3. Check the delivery for completeness.

 Check it against the delivery papers and your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

The permitted ambient conditions must be observed (see "Technical data").

If you have any questions, please contact your supplier or your local sales center.

3.2 Product identification

3.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Safety information and warnings

‣Compare the data on the nameplate with your order.

3.2.2 Product identification

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to the product page for your product on the Internet.

2. At the bottom of the page, select the "Online Tools" link followed by "Check your device

features".

 An additional window opens.

3. Enter the order code from the nameplate into the search field, and then select "Show

details".

 You will receive information on each feature (selected option) of the order code.

Installation CPY7B

6 Endress+Hauser

3.3 Scope of delivery

• 1 electrolyte vessel

• 1 spacer tube

• 3 m (9.8 ft) PTFE pressure hose 4/6

• 1 open-ended wrench, hybrid, SW17/19

• 1 Operating Instructions BA00128C

• Additionally, depending on the version:

– 1 fixing bracket (CPY7B-A0, CPY7B-B0, CPY7B-C0)

– 1 threaded joint Pg 9 (CPY7B-A0, CPY7B-B0, CPY7B-C0)

– 2 hose couplings with check valve (CPY7B-B0, CPY7B-C1, CPY7B-C0, CPY7B-C1)

– 1 air pump connection (CPY7B-B0, CPY7B-C1, CPY7B-C0, CPY7B-C1)

– 0.5 m (1.7 ft) spiral pressure hose (PA12W) (CPY7B-B1, CPY7B-C1)

– 1 hose connector (CPY7B-B1, CPY7B-C1)

If you have any questions, please contact your supplier or your local sales center.

4 Installation

4.1 Installation conditions

Instructions for installing in pressurized systems

General

‣Only the pressure-resistant versions – CPY7B-B or CPY7B-C – should be operated in

pressurized systems.

‣Never exceed the maximum permitted pressure of 11 bar (160 psi) at an ambient

temperature of 30 °C (86 °F).

‣Only use the pressure hose supplied.

‣Regularly check the couplings, valves and hoses for leaks and damage.

Before installing or removing the electrolyte vessel or filling the vessel:

‣Ensure the system is unpressurized and vent the vessel where necessary.

In the event of severely fluctuating medium pressure:

‣Regulate the pressure in the electrolyte vessel in such a way that it is always above the

medium pressure.

CPY7B Installation

Endress+Hauser 7

4.2 Installing the electrolyte vessel

4.2.1 Wall mounting

CPY7B-B0/C0

CPY7B-A0

A0005479

 1 Wall mounting

1 Hose union with check valve 5 Hose connection

2 Manually operated valve 6 Pressure gauge (accessory)

3 Fixing bracket 7 Thread adapter nut

4 Lock nut 8 Spacer tube

Installation CPY7B

8 Endress+Hauser

4.2.2 Installation on an assembly

CPY7B-B1/C1

CPY7B-A1

A0005480

 2 Installation on the CPA111 assembly head

1 Pressure gauge (accessory) 6 Hose union with check valve

2 Spacer tube 7 Manually operated valve

3 Lock nut 8 Thread adapter nut

4 Hose connector 9 Hose connection

5 Spiral hose 10 Pressure hose

4.3 Post-installation check

1. After mounting, check all the connections to ensure they are secure and leak-tight.

2. Ensure that the hoses cannot be removed without force.

3. Check the hoses for damage.

CPY7B Commissioning

Endress+Hauser 9

5 Commissioning

5.1 Filling the vessel with electrolyte

Operational state:

‣Close the manually operated valve

Compressed air cut off:

‣Manually operated valve closed

‣Undo the hose union

Vent the vessel:

‣Open the manually operated valve

Remove the upper section:

‣Hold by the hybrid open-ended

wrench (a) and loosen the coupling

nut

Fill the vessel with electrolyte:

‣Do not overfill the vessel.

The first four steps are not required for the unpressurized version (CPY7B-A).

Commissioning CPY7B

10 Endress+Hauser

5.2 Venting

Having topped up the electrolyte, you have to vent the electrolyte hose.

LCAUTION

Minor skin or eye injuries are possible as a result of contact with the electrolyte

‣Wear safety gloves and protective goggles.

1. Release the electrolyte hose connection on the sensor.

2. Press in the tappet of the hose union until there is a flow of electrolyte:

A0005761

3. Reconnect the electrolyte hose to the sensor.

5.3 Assembly

Follow the sequence for filling the vessel with electrolyte in the reverse order.

1. Fit the top part and tighten the coupling nut (finger-tight, maximum 5 Nm).

2. Close the manually operated valve.

3. Connect the hose union.

4. Open the manually operated valve.

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Endress+Hauser

Endress+Hauser

Endress+Hauser Analytik Jena InnuPure C16 touch Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TSC ThermoShaker Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena UVP Transilluminator Manual de usuario

Endress+Hauser

Endress+Hauser KIO1 Especificaciones técnicas

Endress+Hauser

Endress+Hauser Analytik Jena CyBio SELMA Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TAdvanced Manual de usuario

Endress+Hauser

Endress+Hauser Liquistation CSF33 Manual de usuario

Endress+Hauser

Endress+Hauser ISEmax CAM40 Manual de usuario

Endress+Hauser

Endress+Hauser CPY7 Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena PlasmaQuant MS Series Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena Automatic Boat Drive Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena Biometra TOne 96 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Manual de usuario

Endress+Hauser

Endress+Hauser Liquistation CSF48 Manual de usuario

Endress+Hauser

Endress+Hauser Liquistation CSF34 Manual de usuario

Endress+Hauser

Endress+Hauser Chemoclean CYR10B Manual de usuario

Endress+Hauser

Endress+Hauser ASP Station 2000 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiline Mobile CML18 Manual de usuario

Endress+Hauser

Endress+Hauser Analytik Jena UVP DigiDoc-It Guía

Endress+Hauser

Endress+Hauser StamoSens CNM 750 Manual de usuario

Endress+Hauser

Endress+Hauser Liquiport 2010 CSP44 Manual de usuario

Endress+Hauser

Endress+Hauser analytikjena PlasmaQuant 9100 Manual de usuario

Endress+Hauser

Endress+Hauser analytikjena CyBio QuadPrint HQ Manual de usuario

Endress+Hauser

Endress+Hauser analytikjena Biometra TRobot II Manual

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario

Yamato

Yamato BM510 Manual de usuario