5.1. Battery charging
1. Insert the power cord jack into the inlet at the back of the battery charger.
2. Insert the power cord and plug in. make sure you have to correct model/voltage.
3. Turn on the power switch. At this time, check that the power lamp lights up.
4. Put the motor handpiece in the charging base. Flashing of the charging sign on the LCD screen
indicates that charging in process.
5.2. Handling method for Contra-angle Handpiece
When connecting a contra-angle handpiece to the host machine, hold the contra-angle handpiece
and insert it into the corresponding location slot of the host machine until you hear a click which
means that the contra-angle handpiece is installed well.
For removing the contra-angle handpiece, pull it out directly in a straight direction.
Note: When installing and removing the contra-angle handpiece, please keep the machine in non-
non-working state.
5.3. Handling method for root canal files
While keeping the machine in a non-working state, insert the file into the shaft hole of the
contra-angle handpiece until you hear a click. Do not press the push button of the contra-angle
handpiece while inserting, and then try to take out the file without pressing the button of the
contra-angle handpiece. If the file does not come out, it means that the file is installed well. For
removing files, please press the push button on the head of the contra-angle handpiece and take off
the file.
Note: Try to take out the file without pressing the push button of the contra-angle handpiece after
installing and make sure that the file is installed correctly. Do not use non-sterilized and damaged files for
root canal treatment; it might lead to serious consequences.
5.4. Handling method for lamp holder
Insert the lamp holder into the motor of the handpiece lamp holder socket and connect the
Handpiece, ensure there's enough solid. When removing, slightly pull the open button position of the
lamp holder from the handpiece and then take advantage of up to discharge the lamp holder.
5.5. Operation
Long press the Power Key, the machine will be open and the screen will display. Then click the motor
switch. files will begin to rotate and the light will be on. Finally, press the motor switch again to stop
rotation, and the LED will be out after 8 seconds.
Long press the motor switch and not loosen, it will keep turning and the light is on, if you loosen, it will
stop turning and the LED will be also out after 8 seconds.
Usage
9
5.6. Termination of treatment
After treatment ends, the machine will begin to slow down when pressing the motor switch. then long
press Power Key to shut off the electric current, unloading the lamp holder from the handpiece and
then unloading the handpiece from the motor of the handpiece meanwhile cover the motor cover.
• It will shut off automatically after 5 mins.
• the interface data used before shut down gets saved & gets reloaded when restarted.
•Do not use non-standard or damaged files, as using such files can lead to needle breakage and
accidental injury.
• Do not use or place this product at high temperature.
• When the motor of the handpiece is put into the charging base, please pay attention to the
placement of the machine as placing in a wrong way might lead to damage or the product will not
get charged at all.
• Do not spray lubricants to the motor of the handpiece.
• This product is not waterproof, So should not be immersed in any solution as it can lead to short
circuit.
• This equipment is a special device for dental use only. Do not use this equipment in other places.
• Do not drop the motor of the handpiece and base. Place the charging base on a flat and stable
platform.
• Please use our configured power adapter to charge, do not use any other power adapter.
• Please use a handpiece that we provide or otherwise it may result in incorrect operation of the
machine.
Contraindictions:
This product should not be used in patients with an implanted heart pacemaker (or other electrical
equipment) that has been cautioned against the use of small electrical appliances (such as electric
shavers, hair dryers etc.). Do not use this product for implants or any other dental procedure outside
endodontics.
Notes
10
