Empisal em-250 Manual de usuario
INSTRUCTION MANUAL
SEWING MACHINE
EM-250
- 1 -
Safety instructions
Like any other electrical device, a sewing machine
can cause serious, even life-threatening injuries.To
avoid this, and in order to work safely:
• Before initial use of your sewing machine, read
these operating instructions thoroughly.
• Keep the operating instructions in a suitable place
near the machine. When passing the appliance on
to others, always enclose the operating instructions.
• Always disconnect the power supply when leaving
the machine unattended. This will prevent the risk of
accidents if the machine is switched on accidentally.
• First pull the power plug before changing the bulb or
performing maintenance work on the machine.
This will prevent possibly life-threatening electric
shocks.
• Do not remove the plug from the socket by pulling
on the cable. Always grip the plug and not the cable
when pulling out the power plug.
• Only use the sewing machine in dry rooms.
Don’t use the machine in wet condition and location.
• In case of any visible damage on the machine, the
foot switch or the power cable: Have the damage
repaired by Customer Service before using the
sewing machine again.
• Never let children or elderly persons handle the
machine unsupervised because they may not
properly appreciate the possible dangers. Keep
electrical appliances outside the reach of children.
• Never use the machine when the ventilation
apertures are blocked. Keep the ventilation
apertures of the machine and the foot switch free
from fluff, dust and waste material.
• Don’t let children play with sewing machine.
• Never use the machines if the air went are blocked
keep the air wends free form dust, fusel and
leftovers.
• Never place anything on the foot controller.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Children should be supervised to ensure that they
do not play with the appliance.
Warning against injuries
and material damages:
According to legislation, you as the user of an
electrical appliance are responsible for
preventing possible accidents through
safety-conscious behaviour:
• Keep your work space tidy. An untidy
workplace can lead to accidents.
• Provide adequate lighting when working!
• Do not wear loose clothing or jewellery,as
these can be caught in the moving parts. You
should also wear a hair net if you have long
hair.
• Avoid abnormal posture. Remain steady and in
a well-balanced position at all times.
• Be alert! Pay attention to what you are doing.
Always take a rational approach to your work.
Never work with the sewing machine if you are
unable to concentrate or if you are feeling
unwell!
If accidents occur as a result of handling the
machine with insufficient care, or failure to follow
the safety instructions in this manual, then the
manufacturer cannot accept liability.
If the supply cord that fixed with foot controller is
damaged, it must be replaced by the
manufacturer or its service agent or a similar
qualified person in order to avoid a hazard.
Please use for your sewing machine the
ZHEJIANG FOUNDER presser foot, type
KD-2902.
Power rating: 220 - 240V ~ , 50Hz
Current rating: 1.0A
Protection Class : II
- 2 -
CONTENTS
Name of parts..............................................................................................3-4
Accessories....................................................................................................5
Before sewing (Power supply and sewing lamp)...........................................6
Removing extension table..............................................................................7
Free-arm sewing ............................................................................................7
Winding the bobbin ....................................................................................... 8
Removing bobbin case and bobbin............................................................... 9
Inserting bobbin into bobbin case ................................................................. 9
Inserting bobbin case into shuttle race ........................................................10
Threading upper thread & Twin needle threading .......................................11
Drawing up the bobbin thread......................................................................12
Changing sewing directions.........................................................................12
Levelling machine .....................................................................................13
Adjusting thread tension...............................................................................14
Regulating the presser foot pressure...........................................................15
Drop feed .....................................................................................................15
Changing needle..........................................................................................16
Fabric-Thread-Needle-Table........................................................................17
Sewing (pattern selector) and operation table.............................................18
To start sewing.............................................................................................19
How to finish stitches ...................................................................................20
Straight stitch................................................................................................21
Zigzag sewing ..............................................................................................21
Overcasting..................................................................................................22
Straight and zigzag stretch stitches.............................................................22
Blind stitch...............................................................................................23-24
Button sewing...............................................................................................25
Binding .........................................................................................................25
Zipper sewing...............................................................................................26
Buttonhole sewing........................................................................................27
Hemming......................................................................................................28
Twin needle..................................................................................................29
Embroidery...................................................................................................29
Quilter...........................................................................................................30
Seam guide..................................................................................................30
Maintenance (Cleaning and oiling) ..............................................................31
Checking performance problems-Troubleshooting ....................................32
- 3 -
NAME OF PARTS (FRONT VIEW)
1. Thread take up lever
2. Pattern selector dial
3. Spool pins
4. Bobbin winder spindle
5. Bobbin winder stopper
6. Stitch length dial
7. Reverse button
8. Thread guide and needle clamp
9. Extension table
10. Shuttle cover
11. Presser foot
12. Thread tension dial
13. Face cover
2 3 4
5
6
7
13
12
11
10
8
9
1
- 4 -
REAR VIEW
1. Upper thread guide
2. Thumb screw
3. Needle plate
4. Presser foot lever
5. Hand wheel
6. Stop motion knob
5
4
2
3
1
6
- 5 -
ACCESSORIES
Bobbin
Felt Zigzag foot
(on machine) Buttonhole foot
Button foot
Machine oil Buttonhole cutter
Screw driver
(Large & small)
Needle
#11 #14
Hemmer foot
Zipper foot
Cloth guide and screw
- 6 -
BEFORE SEWING
1. Fit plug into the machine.
2. Insert plug into the main socket.
3. Sewing speed can be varied by the foot
control.
CAUTION: When the machine is not being used, when cleaning it or changing its
lamp, disconnect it from the electric outlet.
Bulb replacement:
1. Open face cover in direction of arrow.
2. Remove bulb by unscrewing it
anti-clockwise.
3. Install a new bulb by screwing it in
clockwise.
4. Use a screw type bulb with 15W. (max)
Power supply / Power supply plug
Speed Controller
Power supply
Plug receptacle
machine plug
Sewing lamp
- 7 -
REMOVING EXTENSION TABLE
Hold the left end of the table and pull it
out in direction of the arrow.
FREE-ARM SEWING
1. This sewing machine can be used as
a flat bed machine but easily converts
to a free arm machine by removing
the extension table.
2. Especially useful for sewing sleeves,
pant, legs, tubular fabrics etc. more
easily.
3. To sew tubular items just slip the
sleeve or leg of pants on the free arm
as shown on the illustration.
- 8 -
5 cm thread
WINDING THE BOBBIN
1. Release stop motion knob.
2. Thread as shown.
3. When bobbin is filled, tighten stop
motion knob.
Push bobbin winder spindle in direction of
the arrow. When bobbin winding is
completed, return spindle to its original
position.
When bobbin winding is incorrect, release
the screw of the upper thread guide and
adjust up or down until bobbin the
winding is balanced.
Stop motion knob
Release
Tighten
Correct
Screw
Winder spindle
Inside
- 9 -
REMOVING BOBBIN CASE AND BOBBIN
1. Raise the needle to its highest
position and open shuttle race cover.
3. Release the latch and the bobbin will fall out
easily.
INSERTINGBOBBININTOBOBBINCASE
1. Pull 5 cm of thread from bobbin and
insert it into bobbin case as shown.
3. Pull the thread through the slot and under the
tension spring and draw out about 10 cm of
thread.
2. Open the hinged latch of the bobbin
case and pull the bobbin case out of
the machine.
2. Guide the end of thread into the slot.
Slot
Hinged latch
5 cm
10 cm
Tension spring
Tabla de contenidos
Otros manuales de Máquina de coser de Empisal
Empisal
Empisal EEMC220 Manual de usuario
Empisal
Empisal EES10 Manual de usuario
Empisal
Empisal Designer 800 Manual de usuario
Empisal
Empisal Dress Maker 270D Manual de usuario
Empisal
Empisal 760C Manual de usuario
Empisal
Empisal creations Manual de usuario
Empisal
Empisal ESM2900 Manual de usuario
Empisal
Empisal EES50 Manual de usuario
Empisal
Empisal S4D Manual de usuario
Empisal
Empisal 760 Manual de usuario
