EMMO T300 Manual de usuario

Emmo T300

MOBILITY SCOOTER

Owner’s Manual

2 | P a g e

Table of Contents

A Message from MTO……………………………………………............................3

Specifications………………………………………………………………………..…....4

Charging Your E-bike…………………………………………...…….……………5-6

Gear Switch……………………………………….……………………….……….………7

Tire and Brakes………………………..……………………………………………..8-9

Ignition…………………………………………………………………………………….10

Seat Adjustments……………………………………………………………………...11

Circuit Breaker..............……………………………….……………..………………12

Remote Controller……………………………………………………………….…...13

Left Side of the Handlebar……………………………………………….………..14

Right Side of the Handlebar………………………………………………………15

E-bike Registration………………...……...…………………………………………16

Contact Information………………………..……………………………..…………17

3 | P a g e

A Message from MTO

Personal Mobility Devices (Motorized Wheelchairs and Medical Scooters)

Do not require registration, licence plates, driver's licence or vehicle insurance.

Persons operating motorized wheelchairs are treated in the same way as pedestrians.

Wheelchairs can be driven by muscular power or other types of power, and are designed for and used by people whose

mobility is limited by one or more conditions or functional impairments. In general, municipalities establish by-laws for

where wheelchairs can or cannot be used. Operators should check with their local municipality to ensure by-laws permit

their use on sidewalks.

A sidewalk should be the first choice for someone using a wheelchair or medical scooter. When there is no wheelchair

accessible curb, the person should return to the sidewalk at the first available opportunity.

If there is no sidewalk available, people using wheelchairs or personal mobility devices should travel, like pedestrians,

along the left shoulder of the roadway facing oncoming traffic.

For more information, please check www.mto.gov.on.ca.

4 | P a g e

Specifications

Color:

Blue; White; Dark Red; Black

Special Features

12V/33Ah x 2 Lead Acid Battery, Dual Speeds, Electronic Brake

Wheel Size:

16″ x 3.0″

Gross Weight:

90 kg

Dual Speed:

Forward Max 8 or 15km/h; Backward 4km/h

Travel Range:

Up to 45 km/ 27.96 miles*

Charging Time:

3 –8 Hours

Climbing Angle:

20 Degrees

Motor:

DC 24V / 500W Continuous

Battery:

12V/33Ah x 2 Lead Acid

Charger:

AC100-120V, Smart Charger (Battery maintained while charging)

Controller:

Curtis 24V90A microprocessor-based PMV system providing optimal levels of torque and

power

Brake System:

Electromagnetic Regenerative

Lock System:

Remote alarm / Key Ignition Lock / Back Wheels Lock

Meter &

Indicator:

Battery Strength Indicator, Light Indicator, Speedo Meter

Lighting System:

Headlight, Turning Signals, Brake Lights, Tail Lights, Indicator Light

Storage:

Seat:

Weight Capacity

Front Glove Box; Under-Seat Storage

Adjustable arm, back, and base.

180Kg

* Travel range is based on riding on level ground, no stops, no winds, warm temperatures for a 175lb rider with

no extra cargo.

5 | P a g e

WARNING!

*CHARGING THE E-BIKE

SHOULD TAKE A MAXIMUM

OF 8 HOURS.

*DO NOT CHARGE THE E-

BIKE FOR MORE THAN 12

HOURS. OVERCHARGING

WILL OVERHEAT THE

CHARGER, AND WILL

RESULT IN THE CHARGER

DAMAGING THE BATTERY.

*MAKE SURE TO FULLY

CHARGE THE E-BIKE ONCE

A MONTH DURING LONG

PERIODS OF INACTIVITY

(i.e. WINTERTIME).

WARNING!

Never plug this cable into the bike itself,

plug this cable into the charger box only.

6 | P a g e

Charging the Bike (Lead Acid Battery)

There are two different plugs on your charger: one end that goes into an 110V power outlet, and the other into the charger

port.

1. Take one end of the charger and plug it into the charger port located on the bike (Please make sure that it is fully

plugged in)

2. Plug the other end of the charger into the power outlet.

3. Confirm that the charging indicator turns red.

Note: When the battery is fully charged, the charging indicator will turn green.

4. Unplug the charger from the power outlet.

5. Unplug the charger from the battery/bike.

Note: The charger light must be red when both plugs are plugged in. It will always turn red first if the bike has been used.

It will turn green after it is fully charged.

WARNING!

Charge the bike for no more than 12 hours.

Fully charge the bike once a month during long periods of inactivity. (i.e. during the wintertime)

7 | P a g e

Gear Switch

This lever changes the gear on the bike; it

affects the movement of the bike.

When the lever is pushed upwards, the bike can

be pushed forwards and backwards. In this

position, if the bike is turned on and the throttle

will not move the bike.

When the lever is pushed downwards, the bike

wheels are locked; the bike cannot be pushed

forwards and backwards. In this position, the

throttle will move the bike.

Note: Ignition has to be turned off before

making any changes to the gear switch.

8 | P a g e

Brake Adjuster

This nut adjusts the tightness of the front brake. Turning it clockwise tighten the brakes, while turning it counter

clockwise loosens the brake.

Note: The air pressure for the tires should be

between 35-40 psi. Do not over tighten the nut

when adjusting the brakes.

Note: The back wheels for the T300 run on an electronic brake system; the wheels only move when the throttle is

being used. When the throttle is released, the back wheels will slowly come to a stop. (The axel controlling the

movement of the back wheels will stop within a short distance.)

9 | P a g e

Wheel Lock

The picture above shows the

position to lock the front

wheel. (Moving the black

lever forwards such that it

holds the main brake in

place)

The picture below shows

the standard, unlocked

position.

Pulling the lever will

deactivate the throttle.

10 | P a g e

Key Positions in Ignition

1. This is the handlebar lock position. This position is

reached when the key is pushed in and turned to the

left, from the off position. This locks the handlebars

when they are turned all the way to the left. (The

handlebars must be turned all the way to the left before

the key will turn.)

2. This is the ‘off’ position. The key simply rests in the

bike, and the bike is not turned on.

3. This is the ‘on’ position. This position is reached

when the key is turned to the right, from the off

position. The bike will turn on, and all functions on

the handlebars will work.

WARNING!

Do not turn on the bike without sitting on it first,

otherwise you will risk touching the throttle by

accident and having it run off by itself.

Otros manuales para T300

Tabla de contenidos

Manuales populares de Scooter de otras marcas

TEKTRO

TEKTRO CHEETAH Manual de usuario

Douglas

Douglas Vespa Sprint Guía de instalación

PLAYTIVE

PLAYTIVE AS-2448 Manual de usuario

Ebinger

Ebinger DONKEY XL Manual de usuario

Flyer

Flyer Mountain Guía del usuario

BackCountry eBikes

BackCountry eBikes Storm Manual de usuario

equipmed

equipmed FreeRoam II Manual de usuario

Yoto

Yoto Lion Manual de usuario

WESTHILL BIKES

WESTHILL BIKES LINK Manual de usuario

BAnff

BAnff eProdigy series Manual de usuario

Winther

Winther 475 Manual de usuario

Jetson

Jetson JBZL17 Manual de usuario

First Choice Mobility

First Choice Mobility Roma Medical Corella S741 Manual de usuario

Carrera

Carrera impel Manual de usuario

Afikim

Afikim Superlight SL-3 Manual de usuario

CareCo

CareCo ZOOM Manual de usuario

Douglas

Douglas Vespa G.S. Manual de usuario

Gazelle

Gazelle with BOSCH System Manual de usuario