Emerson PACSafe Manual de usuario
PACSafe™ Safety Controller
QUICK START GUIDE
GFK-3183 Rev. B
Jan 2021
iPACSafe™Safety Controller Quick Start Guide GFK-3183B
Contents
About this Guide....................................................................................... 1
Product Overview .................................................................................... 2
Designing a Sample Conguration............................................................ 3
Software Installation ................................................................................ 4
Software Features .................................................................................... 9
Designing a Conguration ...................................................................... 12
Dene the Project Settings ................................................................................12
Add Equipment .................................................................................................13
Create Connections ...........................................................................................15
Save the Conguration ........................................................................... 21
Conrm the Conguration...................................................................... 21
General Contact Information .................................................................. 23
ii PACSafe™Safety Controller Quick Start Guide GFK-3183B
1PACSafe™Safety Controller Quick Start Guide GFK-3183B
About this Guide
This guide is designed to help you create a sample conguration for the
PACSafe™ Safety Controller using the PACSafe™ Studio Software. For complete
information on mounting, device installation and operation, commissioning
checkout procedures, product specications, troubleshooting, and glossary,
please refer to the User Manual (p/n GFK-3184) and support documentation
for individual safety input and output devices. Use of this document assumes
familiarity with pertinent safety standards and practices as outlined in the
Manual.
2PACSafe™Safety Controller Quick Start Guide GFK-3183B
Product Overview
Figure 1: Features
Ethernet
Port
Micro USB
Port
Indicator
LED’s
Onboard Interface
Push Buttons
(Display)
Wiring
Ports
3PACSafe™Safety Controller Quick Start Guide GFK-3183B
Designing a Sample Conguration
The conguration process used in this guide provides basic understanding
of the software features that are necessary to create a conguration for any
application. The example conguration is based on a sample application which
makes use of the following devices: a PACSafe Safety Controller, an E-stop
button, a safety light curtain, an interlocked gate switch, and a manual reset.
The illustration below depicts these devices and additional safety equipment for
a sample robotic cell application.
Figure 2: Sample Robotic Cell Application
Gate Switches
E-Stop Buttons
Safety Light Curtain
Muting Indicator Lights
Manual Reset
Hazardous Area
Muting Sensors
4PACSafe™Safety Controller Quick Start Guide GFK-3183B
Software Installation
System
Requirements
Operating
system: Windows 101
System Type: 32-bit, 64-bit
Hard drive
space:
80 MB (plus up to 280 MB for Microsoft .NET 4.0, if not
already installed)
Memory
(RAM): 512 MB minimum, 1 GB+ recommended
Processor: 1 GHz minimum, 2 GHz+ recommended
Screen
Resolution:
1024×768 full color minimum, 1650×1050 full color
recommended
Third-party
software:
Microsoft .NET 4.0 (included with installer), PDF Viewer
(such as Adobe Acrobat)
USB port: USB 2.0 (not required to build congurations)
The PACSafe Studio Software can be downloaded from
https://emerson-mas.force.com/communities/en_US/Download/PACSafe-
Conguration-Tools.
1. Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
5PACSafe™Safety Controller Quick Start Guide GFK-3183B
Important: Administrative rights are required to install the Safety Controller
drivers (needed for communication with the controller).
To install the software from the Emerson website:
1. Download the latest version of the software from
https://emerson-mas.force.com/communities/en_US/Download/PACSafe-
Conguration-Tools.
2. Navigate to and open the downloaded le.
3. Click Next to begin the installation process.
4. Conrm the software destination and availability for users and click Next.
5. Click Install to install the software.
6. Depending on your system settings, a popup window may appear
prompting to allow PACSafe Studio to make changes to your computer.
Click Yes.
7. Click Finish to exit the installer.
To congure PACSafe Safety Tool in an RX3i control:
1. Open the PAC Machine Edition application.
a. Create a new project or Open an existing project.
b. Click OK.
6PACSafe™Safety Controller Quick Start Guide GFK-3183B
Figure 3: PAC Machine Edition
Tabla de contenidos
Otros manuales de Controladores de Emerson
Emerson
Emerson Hytork XL Series Manual de instalación y funcionamiento
Emerson
Emerson Dixell XM660K Diagrama de cableado
Emerson
Emerson Biffi Morin Series Manual de usuario
Emerson
Emerson Dixell iProChill IPC115D Guía del usuario
Emerson
Emerson Tartarini B/240-FS Series Manual de usuario
Emerson
Emerson dixell XC10CX Diagrama de cableado
Emerson
Emerson F-Series Manual de usuario
Emerson
Emerson TESCOM 44-6800 E Series Manual de usuario
Emerson
Emerson Affinity Manual de usuario
Emerson
Emerson FISHER T208VR Series Manual de usuario
Emerson
Emerson Y696 Manual de usuario
Emerson
Emerson Dixell XRB60CHC Diagrama de cableado
Emerson
Emerson AVENTICS NL1 Manual de usuario
Emerson
Emerson Fisher 627B Series Manual de usuario
Emerson
Emerson Fisher 299H Manual de usuario
Emerson
Emerson Fisher 2052 Manual de usuario
Emerson
Emerson Dixell XR44CX Diagrama de cableado
Emerson
Emerson DVC6005 Series Guía de configuración
Emerson
Emerson FRANSEL REGAL 3 Manual de usuario
Emerson
Emerson Fisher FIELDVUE DLC3020f Manual de usuario
