Emerson Rosemount 222 Manual de usuario
Reference Manual
00809-0100-3222, Rev AA
September 2018
Rosemount™ 222
Toroidal Flow Through Conductivity Sensors
2
Safety Information
WARNING
HIGH PRESSURE AND TEMPERATURE HAZARD
Before removing the senosr, reduce the process pressure to 0 psig and cool down the process temperature.
Failure to reduce the pressure and temperature may cause serious injury to personnel.
CAUTION
EQUIPMENT DAMAGE
The wetted sensor materials may not be compatible with process composition and operating conditions. Application
compatibility is entirely your responsibility.
3
4
Contents
Chapter 1 Description and specifications ...................................................................................... 7
1.1 Description ..................................................................................................................................... 7
1.2 Unpacking and inspection ............................................................................................................... 7
1.3 Sensor specifications ....................................................................................................................... 7
1.4 Ordering information ...................................................................................................................... 8
Chapter 2 Install ......................................................................................................................... 11
2.1 Installing the sensor ...................................................................................................................... 11
Chapter 3 Wiring ........................................................................................................................ 15
3.1 Wiring the sensor .......................................................................................................................... 15
Chapter 4 Calibration .................................................................................................................. 19
4.1 Sensor calibration ......................................................................................................................... 19
Chapter 5 Troubleshooting ......................................................................................................... 21
5.1 Troubleshooting ........................................................................................................................... 21
Chapter 6 Accessories ................................................................................................................. 23
Chapter 7 Return of Materials ..................................................................................................... 25
Reference Manual Contents
00809-0100-3222 September 2018
Rosemount 222 Sensors 5
Contents Reference Manual
September 2018 00809-0100-3222
6 Reference Manual
1 Description and specifications
1.1 Description
The Rosemount 222 toroidal flow through conductivity sensor measures conductivity in
highly conductive liquids up to 2 S/cm (2,000,000 μS/cm). A noninvasive flow through
design allows for in-line installations without any obstruction to sample and makes these
sensors ideal for use with viscous or fibrous liquids.
1.2 Unpacking and inspection
Complete the following steps when you unpack your instrument.
Procedure
1. Inspect the shipping container. If there is damage, contact the shipper immediately
for instructions.
2. Save the box.
3. If there is no apparent damage, unpack the container. If there is no apparent
damage, unpack the container and remove the sensor.
4. Ensure that all items shown on the packing list are present. If items are missing, If
items are missing, contact your local Customer Care representative
5. Save the shipping container and packaging.
1.3 Sensor specifications
Table 1-1: Sensor Specifications
Sensor specification Description
Wetted materials Teflon-lined carbon steel pipe, with carbon steel after
flanges; 316 stainless steel outer flange (option -21)
Process connection 1 in. 150 lb or 300 lb raised face threaded ANSI B16.5
flange
2 in. 150 lb or 300 lb raised face threaded ANSI B16.5
flange
Cable length 20 ft. (6.1 m)
Maximum cable length 100 ft. (30 m)
Cell constant (nominal) 1 in. diameter - 6/cm
2 in. diameter - 4/cm
Reference Manual Description and specifications
00809-0100-3222 September 2018
Rosemount 222 Sensors 7
Table 1-2: Temperature and Pressure
Flange Temperature range Maximum pressure
150 lb 5 to 182 °C (41 to 360 °F) 125 psig (963 kPa [abs])
300 lb 250 psig (1825 kPa [abs])
Table 1-3: Pressure (For CRN Registration Only)
Option Flange Diameter Maximum pressure
-01 150 lb 1 in. 125 psig (963 kPa [abs])
-02 2 in.
-05 300 lb 1 in. 200 psig (1480 kPa [abs])
-06 2 in. 250 psig (1825 kPa [abs])
-01-21 150 lb 1 in. 125 psig (963 kPa [abs])
Table 1-4: Weight/Shipping Weight (Weights are rounded up to the nearest 1 lb or 0.5 kg)
Flange Diameter Weight Shipping weight
150 lb 1 in. 11 lb (5.0 kg) 14 lb (6.5 kg)
300 lb 17 lb (8.0 kg) 20 lb (9.0 kg)
150 lb 2 in. 33 lb (15.0 kg). 37 lb (17.0 kg)
300 lb 35 lb (16.0 kg) 40 lb (18.0 kg)
1.4 Ordering information
Table 1-5: Rosemount™ 222 Flow Through Toroidal Conductivity Sensor Ordering
Information
Model Sensor type
222 Flow Through Toroidal Conductivity Sensor
Sizes (1)
01 1 inch, 150 lb flange
02 2 inch, 150 lb flange
05 1 inch, 300 lb flange
06 2 inch, 300 lb flange
Flange option
20 No selection
21 316 stainless steel outer flange (2)
Cable type
54 Standard integral cable (3)
Description and specifications Reference Manual
September 2018 00809-0100-3222
8 Reference Manual
Table 1-5: Rosemount™ 222 Flow Through Toroidal Conductivity Sensor Ordering
Information (continued)
Typical Model Number: 222-01-_-54
(1) Grounding rings are required for proper operation if the outer flanges of the Rosemount 222
sensor are substituted by the customer with non-conductive flanges. Order SQ 7430 and consult
the factory for pricing.
(2) Only available with option -01.
(3) Cables can be extended using remote junction box PN 23550-00 and extension cable.
Reference Manual Description and specifications
00809-0100-3222 September 2018
Rosemount 222 Sensors 9
Description and specifications Reference Manual
September 2018 00809-0100-3222
10 Reference Manual
Tabla de contenidos
Otros manuales de Accesorios de Emerson
Emerson
Emerson Rosemount 3051S Series Manual de usuario
Emerson
Emerson Rosemount 396P Manual de usuario
Emerson
Emerson Rosemount 372 Manual de usuario
Emerson
Emerson IRM-S02TH Manual de usuario
Emerson
Emerson MICRO MOTION T-SERIES Manual de usuario
Emerson
Emerson Rosemount 404 Manual de usuario
Emerson
Emerson Micro Motion LF Series Manual de usuario
Emerson
Emerson Rosemount 3900 Manual de usuario
Emerson
Emerson Rosemount 214C Manual de usuario
Emerson
Emerson 210-2002 Manual de funcionamiento
Emerson
Emerson MICROMOTION CNG050 Manual de usuario
Emerson
Emerson FB1100 Manual de lista de piezas
Emerson
Emerson Rosemount 389 Manual de usuario
Emerson
Emerson Fisher 249VS Manual de usuario
Emerson
Emerson MVS205 Guía rápida
Emerson
Emerson Rosemount TupHFET TF396 Manual de usuario
Emerson
Emerson Rosemount Hx338+ Manual de usuario
Emerson
Emerson Rosemount 0065 Manual de usuario
Emerson
Emerson Rosemount Hx338+ Manual de usuario
Emerson
Emerson Fisher 249 Manual de usuario
